The color stripes and reference chart identify the type of hazard. Write in the appropriate code numbers and list required personal protective equipment.

Keep workers informed about chemical and gas usage, warnings, and antidotes in case of exposure.

The illustrations on these labels help workers identify flammable hazards and corrosive materials at a glance.

The graphics on these labels identify hazardous materials and provide safety reminders.

The illustrations on these labels help workers identify safety reminders at a glance.

Stick these labels on wet or frozen plastic, glass, metal, and paperboard surfaces.

Protect messages from moisture and smudging with the clear laminating flap.

The adhesive on these labels withstands temperatures from -320° to 300° F. Stick them to plastic, glass, and metal surfaces.

Easily peel these labels off when they’re no longer needed. Use them for color coding to identify equipment, materials, and documents at a glance.

Designed for Dymo XTL label printers.

This perforated label tape works with Dymo LabelWriter printers.

Create labels for cable and wire using your Brady BMP41, BMP51, BMP53, or M511 printer.

This label tape works in Brady M710 printers.

Tape works with Epson label printers.

Use these labels with a thermal-transfer printer for smudgeproof results.

Label, rinse, repeat. These labels disappear after 30 seconds of contact with water, leaving no residue.

These labels are cleaned and double-bagged in an ISO Class 4 (Fed. Std. Class 10) clean room. Use them with a thermal-transfer printer for smudgeproof results, or write on them using clean room pens.

Write your information on these labels and then seal the laminating flap to protect your message from weather and tampering.

These labels cannot be removed without visible evidence of tampering—they rip and leave residue when peeled.