Spray liquids around your food processing plant while reducing the risk of contaminating the food. These spray bottles have metal additives in the spray head and on the label that can be picked up by a metal detector if the bottles—or any piece of the spray head or label—fall into your line. The spray head is also bright blue, so it’s easy to spot. Use these bottles to help you comply with Hazard Analysis and Critical Control Point (HACCP) programs for food safety.

An adjustable nozzle lets you pick the spray that’s right for your job, from a mist to a stream. The trigger has a three-finger grip for comfort and less fatigue during extended use. The label has a checklist and write-on area for easy identification of contents.

They cannot be sold to the listed areas due to local product labeling requirements.

Spray at any angle—even upside down.

Dispense up to three times more liquid per stroke than other spray bottles.

No funnel needed to fill these bottles—a wide mouth allows quick refilling without spilling. They have a high-output trigger sprayer that dispenses up to three times more liquid per stroke than other spray bottles.

Identify contents quickly with labels written in English and Spanish.

Access tight spaces with the 36" long tube that extends from this spray bottle.

These sprayers are small enough to spray with one hand. Pump the sprayer to pressurize, then squeeze the trigger. They are often used with degreasers, insecticides, disinfectants, cleaning solutions, and herbicides.

Note: The material of the parts can affect a sprayer's compatibility with a chemical or solution. Make sure the tank, seal, nozzle and pump are suitable for your application.

Pump the handle to pressurize the tank, then squeeze the trigger on the wand to spray. These sprayers are often used for degreasers, insecticides, disinfectants, cleaning solutions, and herbicides. They have a trigger that can be locked for continuous spray.

Note: The material of the parts can affect a sprayer's compatibility with a chemical or solution. Make sure the tank, seal, wand, and nozzle are suitable for your application.

Sprayers with a filter prevent clogs.

Sprayers with an extended handle let you pump, pick up, and put down sprayers without bending over, saving you from back strain.

Sprayers with a spray shield focus your spray so that chemicals go only where intended.

Pump the handle to pressurize the tank, then squeeze the trigger on the wand to spray. These sprayers are often used for degreasers, insecticides, disinfectants, cleaning solutions, and herbicides.

Style A, B, and C sprayers have a trigger that locks for continuous spray.

Style A sprayers have a filter in the tank to prevent clogs.

Note: The material of the parts can affect a sprayer's compatibility with a chemical or solution. Make sure the tank, seal, wand, and nozzle are suitable for your application.

These sprayers have a more durable construction than our other plastic hand-pump sprayers. They have a large fill opening for easy filling and cleaning. Pump the handle to pressurize the tank, then squeeze the trigger on the wand to spray. They are often used for degreasers, insecticides, disinfectants, cleaning solutions, and herbicides. They have a trigger that can be locked for continuous spray.

Note: The material of the parts can affect a sprayer's compatibility with a chemical or solution. Make sure the tank, seal, wand, and nozzle are suitable for your application.

Spray thin liquids evenly with just one hand. These compact sprayers don’t need propellant—fill them and pressurize with air.

Aluminum sprayers weigh less and are more corrosion resistant than steel sprayers, but they’re not as strong.

Steel sprayers are stronger than aluminum sprayers, but they’re heavier. They have a scratch-resistant powder coating that helps prevent corrosion from chemicals and moisture.

PTFE seals handle a broader range of chemicals than Viton® seals. They’re also more wear resistant.

Sprayers with a pressure-relief valve let you release the air inside, so you can open them safely without being sprayed. Face the valve away from you, then slowly turn it counterclockwise until you hear air escape.

Plastic pitchers (sold separately) have a nozzle that fits into the sprayer opening. A removable brass filter strains out foreign particles.

Small enough to spray with one hand, these foamers aerate cleaners to create a foam that breaks down dirt and grime. The foam is easier to see than liquid cleaners and clings where liquid cleaners might drip. They can also be used as sprayers. Swap out the included nozzles as needed—go from a fine mist for delicate surfaces to a powerful stream to remove stuck-on material. The polyethylene tank is lightweight and resists impact and chemicals. The Viton® fluoroelastomer seal resists chemicals too, so you can use these foamers with a variety of solvents and acids.

Fill the reservoir, attach the propellant cartridge, and spray.

Glass sprayer sprays up to 16 oz. with the included propellant. Plastic sprayer sprays up to 18 oz. with the included propellant.