Bow Shackles | McMaster-Carr

Filter by

Pin Diameter

Opening Width

Pin Type

Captive Locking Screw

Material

Shackle Type

Weight Capacity

10,000 lb. to 19,999 lb.

20,000 lb. to 29,999 lb.

30,000 lb. to 99,999 lb.

100,000 lb. or greater

Thickness

Inside Width

Inside Length

Application

Finish

Applied Load Direction

Performance

Safety Factor

RoHS

REACH

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Vertical Capacity

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Exempt

For Maximum Trailer Weight

Hitch Receiver Width

Hitch Receiver Height

Overall Depth

Depth

147 Products

Anchor Shackles for Lifting

Your go-to choice for connecting hooks, slings, and other rigging and lifting equipment. The rounded body on these shackles supports vertical or side loads without fatiguing or warping the shape. They meet ASME specifications for rigging and lifting, so they can hoist everything from steel beams to bulldozers. Look for the manufacturer's stamp to confirm the size and weight capacity. Also known as bow shackles.

Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the shackle can lift is significantly reduced.

Screw Pin—The most common shackle pin type. Although the pin easily connects and disconnects, it can come unscrewed or wear down over time, so it's best for temporary use.

Safety Cotter Pin—Both a threaded nut and cotter pin hold these shackles in place. Also known as bolt-type shackles, the pin won’t slide out with movement. This means you can use these shackles with vibrating equipment and for long-term rigging setups.

Black-Oxide Steel—The dark finish on these shackles resists occasional moisture.

Galvanized Steel—A thick coating protects these shackles in wet and outdoor environments better than black-oxide steel. However, they corrode when exposed to salt water and chemicals.

High-Strength Galvanized Alloy Steel—Stronger than galvanized steel with corrosion resistance in wet and outdoor environments.

Highly Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant shackles stand up to moisture, salt water, and chemicals.

	Thk.	Opening Wd.	Pin Dia.	Inside Lg.	Inside Wd.	Wt. Cap., lb.	Specs. Met	Mil. Spec.		Each
Screw Pin







				Black-Oxide Steel

				3/16"	3/8"	1/4"	7/8"	9/16"	665	ASME B30.26	Fed. Spec. RR-C-271	8494T11	00000


				1/4"	15/32"	5/16"	1 1/8"	3/4"	1,000	ASME B30.26	Fed. Spec. RR-C-271	8494T12	0000
				5/16"	17/32"	3/8"	1 1/4"	15/16"	1,500	ASME B30.26	Fed. Spec. RR-C-271	8494T13	0000
				3/8"	21/32"	7/16"	1 7/16"	1 1/8"	2,000	ASME B30.26	Fed. Spec. RR-C-271	8494T14	00000
				7/16"	23/32"	1/2"	1 11/16"	1 5/16"	3,000	ASME B30.26	Fed. Spec. RR-C-271	8494T15	00000
				1/2"	13/16"	5/8"	1 15/16"	1 1/2"	4,000	ASME B30.26	Fed. Spec. RR-C-271	8494T16	00000
				5/8"	1 1/16"	3/4"	2 1/2"	1 7/8"	6,500	ASME B30.26	Fed. Spec. RR-C-271	8494T17	00000
				3/4"	1 1/4"	7/8"	3"	2"	9,500	ASME B30.26	Fed. Spec. RR-C-271	8494T18	00000
				7/8"	1 7/16"	1"	3 1/4"	2 5/8"	13,000	ASME B30.26	Fed. Spec. RR-C-271	8494T19	00000
				1"	1 11/16"	1 1/8"	3 3/4"	2 3/4"	17,000	ASME B30.26	Fed. Spec. RR-C-271	8494T21	00000




						Galvanized Steel

						3/16"	13/32"	1/4"	29/32"	19/32"	600	ASME B30.26	—	3558T44	0000


						1/4"	1/2"	5/16"	1 5/32"	25/32"	1,100	ASME B30.26	Fed. Spec. RR-C-271	3558T45	0000
						5/16"	17/32"	13/32"	1 1/4"	13/16"	1,500	ASME B30.26	—	3558T46	00000
						7/16"	3/4"	1/2"	1 23/32"	1 3/16"	3,300	ASME B30.26	Fed. Spec. RR-C-271	3558T48	00000
						1/2"	13/16"	5/8"	1 29/32"	1 5/16"	4,400	ASME B30.26	Fed. Spec. RR-C-271	3558T49	00000
						5/8"	1 1/16"	3/4"	2 13/32"	1 23/32"	7,100	ASME B30.26	Fed. Spec. RR-C-271	3558T51	00000
						3/4"	1 1/4"	7/8"	2 13/16"	2"	10,400	ASME B30.26	Fed. Spec. RR-C-271	3558T52	00000
						7/8"	1 15/32"	1"	3 5/16"	2 9/32"	14,300	ASME B30.26	Fed. Spec. RR-C-271	3558T53	00000
						1"	1 11/16"	1 1/8"	3 3/4"	2 11/16"	18,700	ASME B30.26	Fed. Spec. RR-C-271	3558T54	00000
						1 1/8"	1 13/16"	1 1/4"	4 1/4"	2 15/16"	20,900	ASME B30.26	Fed. Spec. RR-C-271	3558T55	000000
						1 1/4"	2 1/32"	1 3/8"	4 23/32"	3 1/4"	26,400	ASME B30.26	Fed. Spec. RR-C-271	3558T56	000000


						1 3/8"	2 1/4"	1 17/32"	5 7/32"	3 5/8"	29,700	ASME B30.26	Fed. Spec. RR-C-271	3558T57	000000
						1 1/2"	2 7/16"	1 21/32"	5 21/32"	3 1/2"	34,000	ASME B30.26	—	3558T58	000000
						1 3/4"	2 31/32"	2"	7"	4 3/4"	50,000	ASME B30.26	—	3558T59	000000
						2"	3 9/32"	2 1/4"	7 15/32"	5 1/2"	70,000	ASME B30.26	—	3558T61	000000
						2 1/2"	4 1/8"	2 3/4"	10 1/2"	7 1/4"	110,000	ASME B30.26	Fed. Spec. RR-C-271	3558T62	00000000




								High-Strength Galvanized Alloy Steel

								3/8"	11/16"	15/32"	1 13/32"	1"	4,000	ASME B30.26	—	3663T51	00000


								7/16"	23/32"	1/2"	1 11/16"	1 3/16"	5,200	ASME B30.26	—	3663T53	00000
								1/2"	27/32"	21/32"	1 31/32"	1 13/32"	6,600	ASME B30.26	—	3663T42	00000
								5/8"	1 1/16"	3/4"	2 7/16"	1 21/32"	10,000	ASME B30.26	—	3663T43	00000
								3/4"	1 9/32"	29/32"	2 27/32"	1 29/32"	14,000	ASME B30.26	—	3663T44	00000
								7/8"	1 15/32"	1"	3 5/16"	2 1/16"	19,000	ASME B30.26	—	3663T45	00000
								1"	1 3/4"	1 5/32"	3 3/4"	2 17/32"	25,000	ASME B30.26	—	3663T46	00000
								1 1/8"	1 27/32"	1 1/4"	4 1/32"	2 11/16"	30,000	ASME B30.26	—	3663T54	000000
								1 1/4"	2 1/32"	1 13/32"	4 21/32"	2 29/32"	36,000	ASME B30.26	—	3663T47	000000
1 1/2"								2 7/16"	1 21/32"	5 21/32"	3 1/2"	50,000	ASME B30.26	—	3663T48	000000
1 5/8"	2 21/32"							1 3/4"	6 1/8"	4 1/8"	58,000	ASME B30.26	—	3663T55	000000


1 3/4"	2 31/32"							2"	7"	4 3/4"	68,000	ASME B30.26	—	3663T52	000000
2"	3 9/32"	2 1/4"						7 15/32"	5 1/2"	86,000	ASME B30.26	—	3663T49	000000




		Highly Corrosion-Resistant 316 Stainless Steel

		3/16"	13/32"					1/4"	27/32"	19/32"	650	ASME B30.26	Fed. Spec. RR-C-271	3583T21	00000


		1/4"	15/32"					5/16"	1 1/8"	3/4"	1,000	ASME B30.26	Fed. Spec. RR-C-271	3583T11	00000
		5/16"	17/32"					3/8"	1 7/32"	13/16"	1,300	ASME B30.26	Fed. Spec. RR-C-271	3583T12	00000
		3/8"	21/32"					7/16"	1 7/16"	31/32"	1,500	ASME B30.26	Fed. Spec. RR-C-271	3583T13	00000
		7/16"	23/32"					1/2"	1 25/32"	1 1/16"	2,000	ASME B30.26	Fed. Spec. RR-C-271	3583T14	00000
		1/2"	13/16"					5/8"	1 27/32"	1 7/32"	3,000	ASME B30.26	Fed. Spec. RR-C-271	3583T15	00000
		5/8"	1 1/32"					3/4"	2 7/16"	1 1/2"	4,000	ASME B30.26	Fed. Spec. RR-C-271	3583T16	00000
		3/4"	1 1/4"					7/8"	2 27/32"	1 29/32"	6,000	ASME B30.26	Fed. Spec. RR-C-271	3583T17	00000
		7/8"	1 15/32"					1"	3 5/16"	2 7/32"	8,000	ASME B30.26	Fed. Spec. RR-C-271	3583T18	00000
		1"	1 11/16"					1 1/8"	3 13/16"	2 5/16"	10,000	ASME B30.26	Fed. Spec. RR-C-271	3583T19	000000
		1 1/4"	2 1/32"	1 3/8"				4 11/16"	3 5/16"	14,000	ASME B30.26	Fed. Spec. RR-C-271	3583T22	000000


		Safety Cotter Pin







								Black-Oxide Steel

								1/4"	15/32"	5/16"	1 1/8"	3/4"	1,000	ASME B30.26	Fed. Spec. RR-C-271	8494T26	00000


								5/16"	17/32"	3/8"	1 1/4"	15/16"	1,500	ASME B30.26	Fed. Spec. RR-C-271	8494T27	00000
								3/8"	21/32"	7/16"	1 7/16"	1 1/8"	2,000	ASME B30.26	Fed. Spec. RR-C-271	8494T28	00000
								7/16"	23/32"	1/2"	1 11/16"	1 5/16"	3,000	ASME B30.26	Fed. Spec. RR-C-271	8494T29	00000
								1/2"	13/16"	5/8"	1 15/16"	1 1/2"	4,000	ASME B30.26	Fed. Spec. RR-C-271	8494T31	00000
								5/8"	1 1/16"	3/4"	2 1/2"	1 7/8"	6,500	ASME B30.26	Fed. Spec. RR-C-271	8494T32	00000
								3/4"	1 1/4"	7/8"	3"	2"	9,500	ASME B30.26	Fed. Spec. RR-C-271	8494T33	00000
								7/8"	1 7/16"	1"	3 1/4"	2 5/8"	13,000	ASME B30.26	Fed. Spec. RR-C-271	8494T34	00000
								1"	1 11/16"	1 1/8"	3 3/4"	2 3/4"	17,000	ASME B30.26	Fed. Spec. RR-C-271	8494T35	000000




							Galvanized Steel

							3/16"		3/8"	1/4"	29/32"	5/8"	700	ASME B30.26	Fed. Spec. RR-C-271	3555T45	00000


							1/4"		1/2"	5/16"	1 5/32"	25/32"	1,100	ASME B30.26	Fed. Spec. RR-C-271	3555T46	00000
							5/16"		17/32"	13/32"	1 1/4"	27/32"	1,600	ASME B30.26	Fed. Spec. RR-C-271	3555T47	00000
							3/8"		11/16"	15/32"	1 15/32"	1 1/32"	2,200	ASME B30.26	Fed. Spec. RR-C-271	3555T48	00000
							7/16"		3/4"	1/2"	1 23/32"	1 3/16"	3,300	ASME B30.26	Fed. Spec. RR-C-271	3555T49	00000
							1/2"		13/16"	21/32"	1 29/32"	1 5/16"	4,400	ASME B30.26	Fed. Spec. RR-C-271	3555T51	00000
							5/8"		1 1/16"	25/32"	2 13/32"	1 23/32"	7,100	ASME B30.26	Fed. Spec. RR-C-271	3555T52	00000
							3/4"		1 1/4"	29/32"	2 13/16"	2"	10,400	ASME B30.26	Fed. Spec. RR-C-271	3555T53	00000
							7/8"		1 15/32"	1 1/32"	3 5/16"	2 9/32"	14,300	ASME B30.26	Fed. Spec. RR-C-271	3555T54	000000
							1"		1 23/32"	1 5/32"	3 3/4"	2 23/32"	18,700	ASME B30.26	Fed. Spec. RR-C-271	3555T55	000000
							1 1/8"		1 13/16"	1 1/4"	4 1/4"	2 15/16"	20,900	ASME B30.26	Fed. Spec. RR-C-271	3555T56	000000


							1 1/4"		2 1/32"	1 13/32"	4 21/32"	2 29/32"	24,000	ASME B30.26	—	3555T57	000000
							1 3/8"		2 1/4"	1 1/2"	5 7/32"	3 1/4"	27,000	ASME B30.26	—	3555T78	000000
							1 1/2"		2 7/16"	1 21/32"	5 21/32"	3 1/2"	34,000	ASME B30.26	—	3555T59	000000
1 3/4"							2 31/32"		2"	7"	4 3/4"	50,000	ASME B30.26	—	3555T61	000000
2"	3 9/32"						2 1/4"		7 15/32"	5 1/2"	70,000	ASME B30.26	—	3555T62	000000




							High-Strength Galvanized Alloy Steel

							1/2"		27/32"	21/32"	1 31/32"	1 13/32"	6,600	ASME B30.26	—	8966T51	00000


							5/8"		1 1/16"	3/4"	2 7/16"	1 21/32"	10,000	ASME B30.26	—	8966T52	00000
							3/4"		1 9/32"	29/32"	2 27/32"	1 29/32"	14,000	ASME B30.26	—	8966T53	000000
							7/8"		1 15/32"	1"	3 5/16"	2 1/16"	19,000	ASME B30.26	—	8966T54	000000
							1"		1 3/4"	1 5/32"	3 3/4"	2 17/32"	25,000	ASME B30.26	—	8966T55	000000
							1 1/8"		1 27/32"	1 1/4"	4"	2 11/16"	30,000	ASME B30.26	—	8966T101	000000
							1 1/4"		2 1/32"	1 13/32"	4 21/32"	2 29/32"	36,000	ASME B30.26	—	8966T76	000000
							1 1/2"		2 7/16"	1 21/32"	5 21/32"	3 1/2"	60,000	ASME B30.26	—	8966T57	000000
							1 5/8"		2 21/32"	1 3/4"	6 1/8"	4 1/8"	70,000	ASME B30.26	—	8966T21	000000
							1 3/4"		2 31/32"	2"	7"	4 3/4"	80,000	ASME B30.26	—	8966T12	000000
		2"					3 9/32"		2 1/4"	7 15/32"	5 1/2"	100,000	ASME B30.26	—	8966T14	00000000




				Highly Corrosion-Resistant 316 Stainless Steel

				1/4"	1/2"		5/16"		1 1/8"	3/4"	1,000	ASME B30.26	Fed. Spec. RR-C-271	3860T21	00000


				5/16"	17/32"		3/8"		1 7/32"	13/16"	1,300	ASME B30.26	Fed. Spec. RR-C-271	3860T22	00000
				3/8"	11/16"		7/16"		1 7/16"	31/32"	1,500	ASME B30.26	Fed. Spec. RR-C-271	3860T23	00000
				7/16"	3/4"		1/2"		1 25/32"	1 1/16"	2,000	ASME B30.26	Fed. Spec. RR-C-271	3860T24	00000
				1/2"	27/32"		5/8"		1 27/32"	1 7/32"	3,000	ASME B30.26	Fed. Spec. RR-C-271	3860T25	00000
				5/8"	1 1/32"		3/4"		2 7/16"	1 1/2"	4,000	ASME B30.26	Fed. Spec. RR-C-271	3860T26	000000
				3/4"	1 1/4"		7/8"		2 27/32"	1 3/4"	6,000	ASME B30.26	Fed. Spec. RR-C-271	3860T27	000000
				7/8"	1 1/2"		1"		3 5/16"	2"	8,000	ASME B30.26	Fed. Spec. RR-C-271	3860T28	000000
				1"	1 23/32"		1 1/8"		3 13/16"	2 5/16"	10,000	ASME B30.26	Fed. Spec. RR-C-271	3860T29	000000
				1 1/4"	2 1/32"		1 3/8"		4 11/16"	3 5/16"	14,000	ASME B30.26	Fed. Spec. RR-C-271	3860T31	000000

Anchor Shackles

Screw Pin

Flush Screw Pin

Captive-Locking-Screw

Safety Cotter Pin

The most common choice for connecting slings, hooks, and more. The bow on these shackles is wider than the pin to support loads from multiple directions and accommodate multiple connectors. They’re often used to tie down or secure loads for transport or storage. Also known as bow shackles.

Warning: Not for overhead lifting.

Screw Pin—The most common shackle pin type. Although the pin easily connects and disconnects, it can come unscrewed or wear down over time, so it's best for temporary use.

Flush Screw Pin—The ends of the pin sit flush with the shackle, so they won’t snag or catch on anything that might loosen the shackle.

Captive-Locking-Screw Pin—The pin on these shackles won’t fall out or get lost. Even when unscrewed, an inner lip on the shackle ear keeps the pin from sliding all the way out. Indentations in the shackle body hold the head of the pin in place once fastened to secure it from vibration and movement.

Highly Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant shackles stand up to moisture, salt water, and chemicals.

	Thk.	Inside Lg.	Inside Wd.	Wt. Cap., lb.		Each
Screw Pin







		Highly Corrosion-Resistant 316 Stainless Steel

		5/32"	11/32"	5/32"	3/4"	9/16"	200	35355T94	00000


		3/16"	7/16"	7/32"	31/32"	23/32"	500	35355T13	0000
		1/4"	1/2"	1/4"	1 3/32"	27/32"	700	35355T14	0000
		5/16"	11/16"	5/16"	1 15/32"	1 1/8"	1,000	35355T25	0000
		3/8"	13/16"	13/32"	1 25/32"	1 3/8"	1,200	35355T26	00000
		15/32"	15/16"	15/32"	2 5/32"	1 21/32"	1,500	35355T95	00000
		1/2"	1 1/16"	17/32"	2 11/32"	1 7/8"	2,500	35355T27	00000
		5/8"	1 1/4"	5/8"	3"	2 3/16"	3,000	35355T96	00000
		3/4"	1 1/2"	3/4"	3 11/32"	2 11/16"	4,000	35355T97	00000
		7/8"	1 23/32"	7/8"	3 27/32"	2 31/32"	5,000	35355T98	00000
		1"	1 31/32"	31/32"	4 7/16"	3 3/8"	6,000	35355T28	000000


		1 1/4"	2 1/2"	1 1/4"	5 7/16"	4 15/32"	9,000	35355T99	000000


		Flush Screw Pin







						Highly Corrosion-Resistant 316 Stainless Steel

						1/4"	15/32"	1/4"	1 1/32"	25/32"	750	3981N11	0000


						5/16"	21/32"	5/16"	1 7/16"	1 1/32"	1,000	3981N12	0000
						3/8"	25/32"	13/32"	1 3/4"	1 1/4"	1,200	3981N13	00000
						15/32"	15/16"	1/2"	2 5/32"	1 19/32"	1,500	3981N14	00000
						1/2"	1 1/32"	17/32"	2 5/16"	1 27/32"	2,500	3981N15	00000
						5/8"	1 1/4"	21/32"	3"	2 3/32"	3,000	3981N16	00000
						3/4"	1 1/2"	3/4"	3 5/16"	2 17/32"	4,000	3981N17	00000
						7/8"	1 23/32"	7/8"	3 27/32"	2 7/8"	5,000	3981N18	00000
						1"	1 15/16"	31/32"	4 13/32"	3 1/4"	6,000	3981N19	000000


						Captive-Locking-Screw Pin







										Highly Corrosion-Resistant 316 Stainless Steel

										5/32"	5/16"	3/16"	23/32"	1/2"	400	3797T61	00000


										3/16"	13/32"	1/4"	29/32"	5/8"	600	3797T62	00000
1/4"										15/32"	9/32"	1 3/32"	3/4"	900	3797T53	00000
5/16"	5/8"									11/32"	1 15/32"	1 1/32"	1,600	3797T54	00000
3/8"	25/32"									13/32"	1 3/4"	1 11/32"	1,200	3797T101	00000
13/32"	25/32"									7/16"	1 13/16"	1 3/8"	2,200	3797T55	00000
15/32"	15/16"									15/32"	2 5/32"	1 21/32"	1,500	3797T102	00000


Safety Cotter Pin







										Highly Corrosion-Resistant 316 Stainless Steel

										1/4"	1/2"	1/4"	29/32"	13/16"	750	3992N11	0000


										5/16"	21/32"	5/16"	1 1/4"	1 3/32"	1,200	3992N12	00000
										3/8"	13/16"	13/32"	1 9/16"	1 1/4"	2,000	3992N13	00000
										15/32"	31/32"	1/2"	1 15/16"	1 1/2"	3,000	3992N14	00000
										5/8"	1 9/32"	5/8"	2 15/32"	2 3/16"	4,000	3992N15	00000
										3/4"	1 19/32"	25/32"	3 3/32"	2 17/32"	5,500	3992N16	00000

Long-Reach D-Type Shackles

Screw Pin

Locking-Screw

Captive-Locking-Screw

Gain extra reach with these shackles. With an elongated body, they can connect loads to an anchor point too far for a standard shackle. They're best paired with chain, since their narrow bow prevents chain links from sliding or moving. These shackles are rated for inline tension only—they can’t handle pulling or tension to the side.

Warning: Not for overhead lifting.

Screw Pin—The most common shackle pin type. Although the pin easily connects and disconnects, it can come unscrewed or wear down over time, so it's best for temporary use.

Locking-Screw Pin—Indentations in the shackle body hold the head of the pin in place once fastened, so the pin won’t loosen from vibration or movement as easily as other screw pins.

Highly Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant shackles stand up to moisture, salt water, and chemicals.

	Inside Lg.	Inside Wd.	Wt. Cap., lb.		Each
Screw Pin







	Highly Corrosion-Resistant 316 Stainless Steel

	5/32"	11/32"	5/32"	1 3/16"	11/32"	200	35685T56	00000


	3/16"	7/16"	3/16"	1 1/2"	7/16"	500	35685T52	0000
	1/4"	1/2"	1/4"	1 3/4"	1/2"	700	35685T43	00000
	5/16"	11/16"	5/16"	2 5/16"	11/16"	1,000	35685T54	00000
	3/8"	25/32"	3/8"	2 7/8"	25/32"	1,200	35685T55	00000
	1/2"	15/16"	15/32"	3 1/2"	15/16"	1,500	35685T57	00000


	Locking-Screw Pin







					Highly Corrosion-Resistant 316 Stainless Steel

					5/32"	11/32"	3/16"	7/8"	5/16"	300	3841T71	00000


					3/16"	13/32"	7/32"	1 5/32"	3/8"	400	3841T72	00000
					1/4"	1/2"	1/4"	1 5/16"	15/32"	700	3841T73	00000
					5/16"	21/32"	11/32"	1 3/4"	5/8"	1,100	3841T74	00000


					Captive-Locking-Screw Pin







									Highly Corrosion-Resistant 316 Stainless Steel

									5/32"	11/32"	3/16"	1 1/4"	5/16"	400	3841T81	00000


									3/16"	13/32"	7/32"	1 9/16"	3/8"	600	3841T82	00000
									1/4"	1/2"	1/4"	1 13/16"	15/32"	900	3841T83	00000
									5/16"	21/32"	11/32"	2 15/32"	5/8"	1,500	3841T84	00000

Hitch Inserts

Insert Shown with Hitch-Ball Components

Use these inserts in hitch-ball connections for towing. They fit into a receiver that's attached to a vehicle. Maximum trailer weight is the total weight being towed. Vertical capacity (also known as tongue weight) represents the weight of the load on the hitch ball.

Shackles

Shackles pivot around a pin, so you can choose the right towing angle. Tighten the pin to secure the shackle in place.

						Inside
	For Max. Trailer Wt., lb.	Vert. Cap., lb.	Pin Dia.	Opening Wd.	Overall Dp.	Lg.	Wd.	Thk.	For Hitch Receiver Size		Each
Powder-Coated Steel



		10,000	1,000	7/8"	1 3/8"	10"	2 1/16"	2"	3/4"	2" Square	7765T108	000000


		13,000	1,300	1"	1 1/2"	11 1/4"	2 3/8"	2 7/32"	7/8"	2 1/2" Square	7765T109	00000
		18,000	1,800	1"	1"	11 1/4"	2 3/8"	2 7/32"	7/8"	3" Square	7765T111	000000