Use four brackets to support the top and bottom edges of panels without drilling holes in them.

Clamp around sensors and switches for a secure hold.

Screw and nut sets or nuts secure brackets and other accessories to rails.

Attach and position phones, tablets, monitors, and other displays on T-slotted rails.

Add rollers to T-slotted framing to create flow rails, ball transfer tables, and other manual conveyors.

Slide drawers, panels, and doors with these tracks and rollers.

Create a four-sided raceway for cable, or give a more finished look to strut channel structures.

To provide corrosion resistance in wet environments, this framing is galvanized.

Fittings come in two pieces to wrap around rails, so you can quickly modify existing structures without disassembling. Use clamp-on framing and fittings to form temporary partitions, modular conveyors, and workstations.

Secure two pressurized hydraulic lines with a single clamp to lessen vibration in hydraulic systems. Weld the bottom plate onto the mounting surface for a more secure connection than rail- and adhesive-mount clamps.

For use with a single line, these clamps mount directly onto rails, no adhesive or welding required. They fit tightly around pressurized lines in hydraulic systems to lessen vibration.

For use with a single line, these plastic clamps reduce wear on softer materials, such as tubing and cable, and prevent corrosion caused by metal-to-metal contact.

Backed with foam adhesive tape, these clamps mount to any smooth surface—no fasteners required. They are noncorrosive, nonconductive nylon.

Route two lines of tubing with a single clamp. Commonly used in compressed air systems, these polypropylene clamps withstand moisture and most chemicals. They have a folding arm that closes to secure material.

Flexible grooves inside these polypropylene clamps allow material to expand and contract. Clamps are moisture and chemical resistant.

Slide these clamps into strut channel and snap closed for quick installation with no tools required. They are noncorrosive, nonconductive nylon.

Lock your line in faster than any other hanger. These hangers automatically close when you press your line into the clamp.

Clip these hangers onto the side of threaded rod. Unlike other threaded-rod-mount hangers, you can use more than one hanger on the same rod to organize multiple lines of pipe, tubing, and conduit.

These plastic rings won't conduct electricity. Also known as distribution rings, they have a large opening for routing multiple cables. A smooth surface prevents damage to wire and cable.

Attach these supports onto metal stud knockouts to route cable, conduit, and tubing through metal studs.

Add a hook and loop cable tie to these mounts to secure a bundle.

These cable ties come with a material certificate with traceable lot number and product shelf life.

For use in environments subjected to chemicals, these ties withstand the most corrosive conditions.

These strong, wide ties are often used as an alternative to metal strapping.

These cable ties have a finely ribbed body and a metal-toothed head that allows them to adjust to the exact size of the material without slipping.

With a thin, flexible body, these cable ties fit tightly around irregularly shaped bundles.

Take the guesswork out of identifying material—use the attached tag to label the bundle.

Whether you plan to change the bundle size or need a temporary hold, these ties have a release tab for removal and reuse.

Protect sensitive electronic equipment from static buildup.

Pull the tab to tear off these cable ties.

Use these plastic cable ties when detection and retrieval are essential, such as in food processing applications. Ties are brightly colored for visibility and contain a special compound that can be picked up by X-ray equipment and metal detectors.

Reduce gaps between the cable tie and bundle—these ties have a smooth body that allows them to adjust to the exact size of the material.

Identify bundles at a glance.

The anchor flares out to grip the wall and keep the hook securely mounted.

Attach to the top of an item to hang it on a hook.

Hold shelves in cabinets and bookcases without standards.

Bend and wrap the legs around almost anything while keeping a level mounting surface.

Make your own sawhorse with these brackets and five 2 × 4s, 2 × 6s, or 2 × 12s.

Clamp around a pipe or tube to guide rope.

Press rope into the gripping body of these cleats for a quick hold.

These bags snap into track to create easy storage.

Permanently sew webbing onto these buckles.

Add a slide to webbing to make adjustable straps.

Position these locks anywhere along a length of cord to create stops or separate cord from contact surfaces.

Create a tie down by attaching these hooks to elastic strap.

Create a loop in elastic cord by snapping these fittings together.

These brackets mount to the frame of a conveyor to hold guide clamps.

Also known as cross blocks, connectors join rods at different angles.

Spacers increase the distance between a bracket and the conveyor frame.

Protect development boards from dust, water, and debris by mounting them to DIN rails inside control cabinets.

Slide these clips on DIN rails—often used in equipment cabinet racks—to route and organize cables. Since these clips don’t require adhesive or screws, you can move them anywhere along the rail.

Protect monitors and televisions from environmental damage with these enclosures.

The hinged snap-on crossbars open for access at any point along the carrier's length so you can lay in the cable and hose, rather than threading it through.

Use these accessories to mount carriers to your machinery without creating an obstruction.

Position small panels and displays with these compact arms.

Elevate hose off the ground to protect it from damage, and to let water on the floor reach a drain.

Installing these clamps is a snap—push their interlocking teeth together with your fingers, then squeeze tight with pliers. To remove, use pliers to push sideways and separate the teeth.

Cover the ends of hose and tube clamps to prevent them from cutting people and nearby objects.