Brass Cam-and-Groove Hose Fittings

Filter by

Material

Fitting Connection

Cam-and-Groove Component

Coupling Size

System of Measurement

Pipe Size

Gender

Thread Type

Connects To

For Use With

Lever Material

Hose ID

Shape

Fitting Type

Socket Locking Type

Socket ID

Compatible With

Andrews Cam-and-Groove

Dixon Cam-and-Groove

Ever-Tite Cam-and-Groove

PT Coupling Cam-and-Groove

Plug OD

Maximum Pressure @ Temperature

Flow Control Type

Length

RoHS

Compliant with Exemptions

Not Compliant

Export Control Classification Number (ECCN)

EAR99

REACH

Compliant

Not Compliant

DFARS Specialty Metals

Exempt

Number of Levers

Forward

How can we improve?

319 Products

How to Identify and Measure Fittings

Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.

A complete coupling consists of a plug and a socket (both sold separately) that allow you to quickly connect and disconnect medium-to large-diameter hose lines. To connect, insert the plug into the socket and press the levers down. The levers fit snugly into the groove on the plug’s body and force the plug against the gasket to form a tight seal. To disconnect, lift both levers and pull out the plug.

Brass couplings are softer than aluminum plugs and sockets, so they’re easier to thread together. They have good corrosion resistance.

Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.

Warning: Relieve all pressure before disconnecting the couplings. Do not use cam-and-groove couplings with compressed air or gas.

Straight Plugs, NPT Male Threaded Pipe

Maximum Pressure: See table
Temperature Range: -65° to 250° F
Specifications Met: Fed. Spec. A-A-59326
Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings

Plugs with male threaded end are also known as F adapters.

Brass
Coupling Size	Plug OD	Pipe Size	Max. Pressure		Each
1/2	15/16"	1/2	250 psi @ 72° F	000000000	000000
3/4	1 1/4"	3/4	250 psi @ 72° F	00000000	00000
1	1 7/16"	1	250 psi @ 72° F	00000000	00000
1	1 7/16"	1 1/2	250 psi @ 72° F	000000000	00000
1 1/4	1 13/16"	1 1/4	250 psi @ 72° F	00000000	00000
1 1/2	2 1/8"	1 1/2	250 psi @ 72° F	00000000	00000
1 1/2	2 1/8"	2	250 psi @ 72° F	000000000	00000
2	2 1/2"	1 1/2	250 psi @ 72° F	000000000	00000
2	2 1/2"	2	250 psi @ 72° F	00000000	00000
2 1/2	3"	2 1/2	200 psi @ 72° F	00000000	00000
3	3 5/8"	3	200 psi @ 72° F	00000000	00000
4	4 3/4"	4	150 psi @ 72° F	00000000	000000

Straight Plugs, BSPT Male Threaded Pipe

Maximum Pressure: See table
Temperature Range: -65° to 250° F
Specifications Met: Fed. Spec. A-A-59326
Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings

Plugs with male threaded end are also known as F adapters.

Brass
Coupling Size	Plug OD	Pipe Size	Max. Pressure		Each
1/2	15/16"	1/2	250 psi @ 72° F	000000000	000000
3/4	1 1/4"	1/2	250 psi @ 72° F	000000000	00000
3/4	1 1/4"	3/4	250 psi @ 72° F	000000000	00000
1	1 7/16"	1	250 psi @ 72° F	000000000	00000
1 1/4	1 13/16"	1 1/4	250 psi @ 72° F	000000000	00000
1 1/2	2 1/8"	1 1/2	250 psi @ 72° F	000000000	00000
2	2 1/2"	2	250 psi @ 72° F	000000000	00000
3	3 5/8"	3	200 psi @ 72° F	000000000	000000

Straight Plugs, NPT Female Threaded Pipe

Maximum Pressure: See table
Temperature Range: -65° to 250° F
Specifications Met: Fed. Spec. A-A-59326
Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings

Plugs with female threaded end are also known as A adapters.

Brass
Coupling Size	Plug OD	Pipe Size	Max. Pressure		Each
1/2	15/16"	1/2	250 psi @ 72° F	000000000	000000
3/4	1 1/4"	3/4	250 psi @ 72° F	00000000	00000
1	1 7/16"	1	250 psi @ 72° F	00000000	00000
1 1/4	1 13/16"	1 1/4	250 psi @ 72° F	00000000	00000
1 1/2	2 1/8"	1 1/2	250 psi @ 72° F	00000000	00000
1 1/2	2 1/8"	2	250 psi @ 72° F	000000000	00000
2	2 1/2"	1 1/2	250 psi @ 72° F	000000000	00000
2	2 1/2"	2	250 psi @ 72° F	00000000	00000
2 1/2	3"	2 1/2	200 psi @ 72° F	00000000	00000
3	3 5/8"	3	200 psi @ 72° F	00000000	00000
4	4 3/4"	4	150 psi @ 72° F	00000000	000000
5	5 3/4"	5	75 psi @ 72° F	000000000	000000

Straight Plugs, BSPP Female Threaded Pipe

Maximum Pressure: See table
Temperature Range: -65° to 250° F
Specifications Met: Fed. Spec. A-A-59326
Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings

Plugs with female threaded end are also known as A adapters.

Brass
Coupling Size	Plug OD	Pipe Size	Max. Pressure		Each
1/2	15/16"	1/2	250 psi @ 72° F	000000000	000000
3/4	1 1/4"	1/2	250 psi @ 72° F	000000000	00000
3/4	1 1/4"	3/4	250 psi @ 72° F	000000000	00000
1 1/2	2 1/8"	1 1/2	250 psi @ 72° F	000000000	00000
3	3 5/8"	3	200 psi @ 72° F	000000000	00000

Straight Plugs, Barbed Hose

Maximum Pressure: See table
Temperature Range: -65° to 250° F
Attachment Type: Use Band-and-Buckle Clamps
Specifications Met: Fed. Spec. A-A-59326
Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings

Plugs with barbed end are also known as E adapters. Insert the barbed end into plastic or rubber hose and secure with a clamp.

Brass
Coupling Size	Plug OD	For Hose ID	Max. Pressure		Each
1/2	1"	1/2"	250 psi @ 72° F	000000000	000000
3/4	1 1/4"	3/4"	250 psi @ 72° F	00000000	00000
1	1 7/16"	1"	250 psi @ 72° F	00000000	00000
1 1/4	1 13/16"	1 1/4"	250 psi @ 72° F	00000000	00000
1 1/2	2 1/8"	1 1/2"	250 psi @ 72° F	00000000	00000
2	2 1/2"	2"	250 psi @ 72° F	00000000	00000
2 1/2	3"	2 1/2"	200 psi @ 72° F	00000000	00000
3	3 5/8"	3"	200 psi @ 72° F	00000000	00000
4	4 3/4"	4"	150 psi @ 72° F	00000000	000000

Straight Plug Connectors

Maximum Pressure: See table
Temperature Range: -65° to 250° F
Specifications Met: Fed. Spec. A-A-59326
Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings

Plug connectors and reducers are also known as SA spool adapters.

Brass
Coupling Size	Plug OD	Max. Pressure		Each
1	1 7/16"	250 psi @ 72° F	000000000	000000
2	2 1/2"	250 psi @ 72° F	000000000	00000

End Plugs

Maximum Pressure: See table
Temperature Range: -65° to 250° F
Specifications Met: Fed. Spec. A-A-59326
Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings

Brass
Coupling Size	Plug OD	Max. Pressure		Each
1/2	15/16"	250 psi @ 72° F	000000000	000000
3/4	1 1/4"	250 psi @ 72° F	00000000	00000
1	1 7/16"	250 psi @ 72° F	00000000	00000
1 1/4	1 13/16"	250 psi @ 72° F	00000000	00000
1 1/2	2 1/8"	250 psi @ 72° F	00000000	00000
2	2 1/2"	250 psi @ 72° F	00000000	00000
2 1/2	3"	200 psi @ 72° F	00000000	00000
3	3 5/8"	200 psi @ 72° F	00000000	00000
4	4 3/4"	150 psi @ 72° F	00000000	00000

6" Retaining Chain	00000000	Each	00000
12" Retaining Chain	00000000	Each	0000

Straight Sockets with Locking Levers, NPT Male Threaded Pipe

Maximum Pressure: See table
Temperature Range: -65° to 250° F
Specifications Met: Fed. Spec. A-A-59326
Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings

Couplings with locking levers prevent accidental disconnection. The locks engage automatically when the coupling is connected. Press the locks simultaneously to disengage.

Sockets with male threaded end are also known as B couplers.

Sockets
			Levers						Replacement Gaskets			Replacement Levers
Coupling Size	Socket ID	Pipe Size	No. of	Material	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each
Brass
1	1 7/16"	1	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	000000000	000000	10	0000000	00000	000000000	000000
1 1/4	1 13/16"	1 1/4	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	000000000	00000	10	0000000	0000	000000000	00000
1 1/2	2 1/8"	1 1/2	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	000000000	00000	10	0000000	0000	000000000	00000
2	2 1/2"	2	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	000000000	000000	10	0000000	0000	000000000	00000
2 1/2	3"	2 1/2	2	Brass	Zinc-Plated Steel	200 psi @ 72° F	000000000	000000	10	0000000	0000	000000000	00000
3	3 5/8"	3	2	Brass	Zinc-Plated Steel	200 psi @ 72° F	000000000	000000	10	0000000	00000	000000000	00000
4	4 3/4"	4	2	Brass	Zinc-Plated Steel	150 psi @ 72° F	000000000	000000	10	0000000	00000	000000000	00000

Protective Plug for 2 Coupling Size Sockets	Each	000000
Protective Plug for 4 Coupling Size Sockets	Each	00000
Protective Plug for 3 Coupling Size Sockets	Each	00000

Straight Sockets with Locking Levers, NPT Female Threaded Pipe

Maximum Pressure: See table
Temperature Range: -65° to 250° F
Specifications Met: Fed. Spec. A-A-59326
Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings

Couplings with locking levers prevent accidental disconnection. The locks engage automatically when the coupling is connected. Press the locks simultaneously to disengage.

Straight sockets with female threaded end are also known as D couplers.

Sockets
			Levers						Replacement Gaskets			Replacement Levers
Coupling Size	Socket ID	Pipe Size	No. of	Material	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each
Brass
1	1 7/16"	1	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	000000000	000000	10	0000000	00000	000000000	000000
1 1/4	1 13/16"	1 1/4	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	000000000	00000	10	0000000	0000	000000000	00000
1 1/2	2 1/8"	1 1/2	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	000000000	00000	10	0000000	0000	000000000	00000
2	2 1/2"	2	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	000000000	000000	10	0000000	0000	000000000	00000
2 1/2	3"	2 1/2	2	Brass	Zinc-Plated Steel	200 psi @ 72° F	000000000	000000	10	0000000	0000	000000000	00000
3	3 5/8"	3	2	Brass	Zinc-Plated Steel	200 psi @ 72° F	000000000	000000	10	0000000	00000	000000000	00000
4	4 3/4"	4	2	Brass	Zinc-Plated Steel	150 psi @ 72° F	000000000	000000	10	0000000	00000	000000000	00000

Protective Plug for 2 Coupling Size Sockets	Each	000000
Protective Plug for 4 Coupling Size Sockets	Each	00000
Protective Plug for 3 Coupling Size Sockets	Each	00000

Straight Sockets with Locking Levers, Barbed Hose

Maximum Pressure: See table
Temperature Range: -65° to 250° F
Attachment Type: Use Band-and-Buckle Clamps
Specifications Met: Fed. Spec. A-A-59326
Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings

Couplings with locking levers prevent accidental disconnection. The locks engage automatically when the coupling is connected. Press the locks simultaneously to disengage.

Straight sockets with barbed end are also known as C couplers. Insert the barbed end into plastic or rubber hose and secure with a clamp.

Sockets
			Levers						Replacement Gaskets			Replacement Levers
Coupling Size	Socket ID	For Hose ID	No. of	Material	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each
Brass
1	1 7/16"	1"	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	000000000	000000	10	0000000	00000	000000000	000000
1 1/4	1 13/16"	1 1/4"	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	000000000	00000	10	0000000	0000	000000000	00000
1 1/2	2 1/8"	1 1/2"	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	000000000	00000	10	0000000	0000	000000000	00000
2	2 1/2"	2"	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	000000000	000000	10	0000000	0000	000000000	00000
2 1/2	3"	2 1/2"	2	Brass	Zinc-Plated Steel	200 psi @ 72° F	000000000	000000	10	0000000	0000	000000000	00000
3	3 5/8"	3"	2	Brass	Zinc-Plated Steel	200 psi @ 72° F	000000000	000000	10	0000000	00000	000000000	00000
4	4 3/4"	4"	2	Brass	Zinc-Plated Steel	150 psi @ 72° F	000000000	000000	10	0000000	00000	000000000	00000

Protective Plug for 4 Coupling Size Sockets	Each	000000
Protective Plug for 2 Coupling Size Sockets	Each	00000
Protective Plug for 3 Coupling Size Sockets	Each	00000

Caps with Locking Levers

Maximum Pressure: See table
Temperature Range: -65° to 250° F
Specifications Met: Fed. Spec. A-A-59326
Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings

Couplings with locking levers prevent accidental disconnection. The locks engage automatically when the coupling is connected. Press the locks simultaneously to disengage.

Caps
		Levers						Replacement Gaskets			Replacement Levers
Coupling Size	Socket ID	No. of	Material	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each
Brass
1	1 7/16"	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	000000000	000000	10	0000000	00000	000000000	000000
1 1/4	1 13/16"	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	000000000	00000	10	0000000	0000	000000000	00000
1 1/2	2 1/8"	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	000000000	00000	10	0000000	0000	000000000	00000
2	2 1/2"	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	000000000	00000	10	0000000	0000	000000000	00000
2 1/2	3"	2	Brass	Zinc-Plated Steel	200 psi @ 72° F	000000000	000000	10	0000000	0000	000000000	00000
3	3 5/8"	2	Brass	Zinc-Plated Steel	200 psi @ 72° F	000000000	000000	10	0000000	00000	000000000	00000
4	4 3/4"	2	Brass	Zinc-Plated Steel	150 psi @ 72° F	000000000	000000	10	0000000	00000	000000000	00000

6" Retaining Chain	00000000	Each	00000
12" Retaining Chain	00000000	Each	0000

Straight Sockets, NPT Male Threaded Pipe

Maximum Pressure: See table
Temperature Range: -65° to 250° F
Specifications Met: Fed. Spec. A-A-59326
Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings

Sockets with male threaded end are also known as B couplers.

Sockets
			Levers						Replacement Gaskets			Replacement Levers
Coupling Size	Socket ID	Pipe Size	No. of	Material	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each
Brass
1/2	15/16"	1/2	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	000000000	000000	10	0000000	00000	000000000	00000
3/4	1 1/4"	3/4	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000
1	1 7/16"	1	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000
1 1/4	1 13/16"	1 1/4	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000
1 1/2	2 1/8"	1	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	000000000	000000	10	0000000	0000	000000000	0000
1 1/2	2 1/8"	1 1/2	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000
2	2 1/2"	1 1/2	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	000000000	000000	10	0000000	0000	000000	00
2	2 1/2"	2	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000	00
2 1/2	3"	2 1/2	2	Brass	Zinc-Plated Steel	200 psi @ 72° F	00000000	00000	10	0000000	0000	000000	00
3	3 5/8"	2	2	Brass	Zinc-Plated Steel	200 psi @ 72° F	000000000	000000	10	0000000	00000	000000000	0000
3	3 5/8"	3	2	Brass	Zinc-Plated Steel	200 psi @ 72° F	00000000	000000	10	0000000	00000	000000000	0000
4	4 3/4"	4	2	Brass	Zinc-Plated Steel	150 psi @ 72° F	00000000	000000	10	0000000	00000	000000000	0000

Protective Plug for 3 Coupling Size Sockets	Each	000000
Protective Plug for 4 Coupling Size Sockets	Each	00000
Protective Plug for 2 Coupling Size Sockets	Each	00000

Straight Sockets, BSPT Male Threaded Pipe

Maximum Pressure: See table
Temperature Range: -65° to 250° F
Specifications Met: Fed. Spec. A-A-59326
Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings

Sockets with male threaded end are also known as B couplers.

			Levers
Coupling Size	Socket ID	Pipe Size	No. of	Material	Pull Ring Material	Max. Pressure		Each
Brass
3/4	1 1/4"	3/4	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	000000000	000000
1	1 7/16"	1	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	000000000	00000
1 1/4	1 13/16"	1 1/4	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	000000000	00000

Straight Sockets, NPT Female Threaded Pipe

Maximum Pressure: See table
Temperature Range: -65° to 250° F
Specifications Met: Fed. Spec. A-A-59326
Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings

Straight sockets with female threaded end are also known as D couplers.

Sockets
			Levers						Replacement Gaskets			Replacement Levers
Coupling Size	Socket ID	Pipe Size	No. of	Material	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each
Brass
1/2	15/16"	1/2	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	000000000	000000	10	0000000	00000	000000000	00000
3/4	1 1/4"	3/4	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000
1	1 7/16"	1	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000
1 1/4	1 13/16"	1 1/4	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000
1 1/2	2 1/8"	1 1/2	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000
2	2 1/2"	1 1/2	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	000000000	000000	10	0000000	0000	000000	00
2	2 1/2"	2	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000	00
2 1/2	3"	2 1/2	2	Brass	Zinc-Plated Steel	200 psi @ 72° F	00000000	00000	10	0000000	0000	000000	00
3	3 5/8"	3	2	Brass	Zinc-Plated Steel	200 psi @ 72° F	00000000	000000	10	0000000	00000	000000000	0000
4	4 3/4"	4	2	Brass	Zinc-Plated Steel	150 psi @ 72° F	00000000	000000	10	0000000	00000	000000000	0000

Protective Plug for 4 Coupling Size Sockets	Each	000000
Protective Plug for 2 Coupling Size Sockets	Each	00000
Protective Plug for 3 Coupling Size Sockets	Each	00000

Straight Sockets, BSPP Female Threaded Pipe

Maximum Pressure: See table
Temperature Range: -65° to 250° F
Specifications Met: Fed. Spec. A-A-59326
Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings

Straight sockets with female threaded end are also known as D couplers.

			Levers
Coupling Size	Socket ID	Pipe Size	No. of	Material	Pull Ring Material	Max. Pressure		Each
Brass
1/2	15/16"	1/2	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	000000000	000000
3/4	1 1/4"	1/2	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	000000000	00000

Straight Sockets, Barbed Hose

Maximum Pressure: See table
Temperature Range: -65° to 250° F
Attachment Type: Use Band-and-Buckle Clamps
Specifications Met: Fed. Spec. A-A-59326
Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings

Straight sockets with barbed end are also known as C couplers. Insert the barbed end into plastic or rubber hose and secure with a clamp.

Sockets
			Levers						Replacement Gaskets			Replacement Levers
Coupling Size	Socket ID	For Hose ID	No. of	Material	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each
Brass
1/2	15/16"	1/2"	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	000000000	000000	10	0000000	00000	000000000	00000
3/4	1 1/4"	3/4"	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000
1	1 7/16"	1"	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000
1 1/4	1 13/16"	1 1/4"	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000
1 1/2	2 1/8"	1"	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	000000000	00000	10	0000000	0000	000000000	0000
1 1/2	2 1/8"	1 1/2"	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000
2	2 1/2"	1 1/2"	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	000000000	000000	10	0000000	0000	000000	00
2	2 1/2"	2"	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	00000000	000000	10	0000000	0000	000000	00
2 1/2	3"	2 1/2"	2	Brass	Zinc-Plated Steel	200 psi @ 72° F	00000000	000000	10	0000000	0000	000000	00
3	3 5/8"	3"	2	Brass	Zinc-Plated Steel	200 psi @ 72° F	00000000	000000	10	0000000	00000	000000000	0000
4	4 3/4"	4"	2	Brass	Zinc-Plated Steel	150 psi @ 72° F	00000000	000000	10	0000000	00000	000000000	0000

Protective Plug for 3 Coupling Size Sockets	Each	000000
Protective Plug for 4 Coupling Size Sockets	Each	00000
Protective Plug for 2 Coupling Size Sockets	Each	00000

90° Elbow Sockets, NPT Female Threaded Pipe

Maximum Pressure: See table
Temperature Range: -65° to 250° F
Specifications Met: Fed. Spec. A-A-59326
Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings

90° elbow sockets with female threaded end are also known as LD couplers.

Sockets
			Levers						Replacement Gaskets			Replacement Levers
Coupling Size	Socket ID	Pipe Size	No. of	Material	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each
Brass
1	1 7/16"	1	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	00000000	000000	10	0000000	00000	000000000	00000
1 1/2	2 1/8"	1 1/2	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	00000000	000000	10	0000000	0000	000000000	0000
2	2 1/2"	2	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	00000000	000000	10	0000000	0000	000000	00

Protective Plug for 2 Coupling Size Sockets

00000000

Each

000000

90° Elbow Sockets, Barbed Hose

Maximum Pressure: See table
Temperature Range: -65° to 250° F
Attachment Type: Use Band-and-Buckle Clamps
Specifications Met: Fed. Spec. A-A-59326
Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings

90° elbow sockets with barbed end are also known as CL couplers. Insert the barbed end into plastic or rubber hose and secure with a clamp.

Sockets
			Levers						Replacement Gaskets			Replacement Levers
Coupling Size	Socket ID	For Hose ID	No. of	Material	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each
Brass
1	1 7/16"	1"	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	00000000	000000	10	0000000	00000	000000000	00000
1 1/2	2 1/8"	1 1/2"	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	00000000	000000	10	0000000	0000	000000000	0000
2	2 1/2"	2"	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	00000000	000000	10	0000000	0000	000000	00

Protective Plug for 2 Coupling Size Sockets

00000000

Each

000000

Straight Socket Connectors

Maximum Pressure: See table
Temperature Range: -65° to 250° F
Specifications Met: Fed. Spec. A-A-59326
Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings

Socket connectors and reducers are also known as C × C couplers.

Connectors
		Levers						Replacement Gaskets			Replacement Levers
Coupling Size	Socket ID	No. of	Material	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each
Brass
1	1 7/16"	4	Brass	Zinc-Plated Steel	250 psi @ 72° F	000000000	0000000	10	0000000	00000	000000000	00000
2	2 1/2"	4	Brass	Zinc-Plated Steel	250 psi @ 72° F	000000000	000000	10	0000000	0000	000000000	0000
3	3 5/8"	4	Brass	Zinc-Plated Steel	200 psi @ 72° F	000000000	000000	10	0000000	00000	000000000	0000

Protective Plug for 2 Coupling Size Sockets	00000000	Each	000000
Protective Plug for 3 Coupling Size Sockets	00000000	Each	00000

Straight Socket Reducers

Maximum Pressure: See table
Temperature Range: -65° to 250° F
Specifications Met: Fed. Spec. A-A-59326
Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings

Socket connectors and reducers are also known as C × C couplers.

Coupling Size		Socket ID		Levers
(A)	(B)	(A)	(B)	No. of	Material	Pull Ring Material	Max. Pressure		Each
Brass
3	2	3 5/8"	2 1/2"	4	Brass	Zinc-Plated Steel	200 psi @ 72° F	000000000	0000000

Protective Plug for 3 Coupling Size Sockets	00000000	Each	000000
Protective Plug for 2 Coupling Size Sockets	00000000	Each	00000
Brass Replacement Levers for 3 Coupling Size Sockets	000000000	Each	0000
Brass Replacement Levers for 2 Coupling Size Sockets	000000000	Each	0000

Straight Plug-to-Socket Reducing Adapters

Maximum Pressure: See table
Temperature Range: -65° to 250° F
Specifications Met: Fed. Spec. A-A-59326
Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings

Plug-to-socket reducing adapters are also known as A × C couplers.

Reducing Adapters
Coupling Size				Levers						Replacement Gaskets
(A)	(B)	Plug OD	Socket ID	No. of	Material	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.
Brass
2	3	2 1/2"	3 5/8"	2	Brass	Zinc-Plated Steel	200 psi @ 72° F	000000000	0000000	10	0000000	000000
3	4	3 5/8"	4 3/4"	2	Brass	Zinc-Plated Steel	150 psi @ 72° F	000000000	000000	10	0000000	00000

Protective Plug for 3 Coupling Size Sockets	00000000	Each	000000
Protective Plug for 4 Coupling Size Sockets	00000000	Each	00000
Brass Replacement Lever for 3 and 4 Coupling Size Sockets	000000000	Each	0000
Brass Replacement Lever for 2 Coupling Size Sockets	000000000	Each	0000

Caps

Maximum Pressure: See table
Temperature Range: -65° to 250° F
Specifications Met: Fed. Spec. A-A-59326
Compatible With: Andrews Cam-and-Groove Couplings, Dixon Cam-and-Groove Couplings, Ever-Tite Cam-and-Groove Couplings, PT Coupling Cam-and-Groove Couplings

Caps
		Levers						Replacement Gaskets			Replacement Levers
Coupling Size	Socket ID	No. of	Material	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each
Brass
1/2	15/16"	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	000000000	000000	10	0000000	00000	000000000	00000
3/4	1 1/4"	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000
1	1 7/16"	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000
1 1/4	1 13/16"	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000
1 1/2	2 1/8"	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000
2	2 1/2"	2	Brass	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000
2 1/2	3"	2	Brass	Zinc-Plated Steel	200 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000
3	3 5/8"	2	Brass	Zinc-Plated Steel	200 psi @ 72° F	00000000	00000	10	0000000	00000	000000000	0000

6" Retaining Chain	00000000	Each	00000
12" Retaining Chain	00000000	Each	0000

Metal Cam-and-Groove Hose Couplings for Chemicals and Petroleum

Made of metal, these couplings have better durability than plastic cam-and-groove couplings. A complete coupling consists of a plug and a socket (both sold separately) that allow you to quickly connect and disconnect medium-to large-diameter hose lines. To connect, insert the plug into the socket and press the levers down. The levers fit snugly into the groove on the plug’s body and force the plug against the gasket to form a tight seal. To disconnect, lift both levers and pull out the plug. Couplings are compatible with Andrews, Dixon, Ever-Tite, and PT cam-and-groove couplings.

Aluminum fittings are lighter in weight than 316 stainless steel fittings. They have good corrosion resistance.

Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size.

Warning: Relieve all pressure before disconnecting the couplings. Do not use cam-and-groove couplings with compressed air or gas.

Straight Sockets with Locking Levers, NPT Male Threaded Pipe

For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
Maximum Pressure: See table
Temperature Range: -65° to 250° F
Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
Specifications Met: Fed. Spec. A-A-59326

Sockets with male threaded end are also known as B couplers.

Sockets with locking levers prevent accidental disconnection. The locks engage automatically when the coupling is connected. Press the locks simultaneously to disengage.

Sockets									Replacement Gaskets			Replacement Levers		Protective Plugs
Coupling Size	Socket ID	Pipe Size	Dash Size	No. of Levers	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each		Each
Aluminum with Brass Levers
1	1 7/16"	1	16	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	000000	10	0000000	00000	000000000	000000	000000	00
1 1/4	1 13/16"	1 1/4	20	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	00000	10	0000000	0000	000000000	00000	000000	00
1 1/2	2 1/8"	1 1/2	24	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	00000	10	0000000	0000	000000000	00000	000000	00
2	2 1/2"	2	32	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	00000	10	0000000	0000	000000000	00000	0000000	000000
2 1/2	3"	2 1/2	40	2	Zinc-Plated Steel	200 psi @ 72° F	000000000	00000	10	0000000	0000	000000000	00000	000000	00
3	3 5/8"	3	48	2	Zinc-Plated Steel	200 psi @ 72° F	000000000	00000	10	0000000	00000	000000000	00000	0000000	00000
4	4 3/4"	4	64	2	Zinc-Plated Steel	150 psi @ 72° F	000000000	000000	10	0000000	00000	000000000	00000	0000000	00000

Straight Sockets with Locking Levers, NPT Female Threaded Pipe

For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
Maximum Pressure: See table
Temperature Range: -65° to 250° F
Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
Specifications Met: Fed. Spec. A-A-59326

Straight sockets with female threaded end are also known as D couplers.

Sockets with locking levers prevent accidental disconnection. The locks engage automatically when the coupling is connected. Press the locks simultaneously to disengage.

Sockets									Replacement Gaskets			Replacement Levers		Protective Plugs
Coupling Size	Socket ID	Pipe Size	Dash Size	No. of Levers	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each		Each
Aluminum with Brass Levers
1	1 7/16"	1	16	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	000000	10	0000000	00000	000000000	000000	000000	00
1 1/4	1 13/16"	1 1/4	20	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	00000	10	0000000	0000	000000000	00000	000000	00
1 1/2	2 1/8"	1 1/2	24	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	00000	10	0000000	0000	000000000	00000	000000	00
2	2 1/2"	2	32	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	00000	10	0000000	0000	000000000	00000	0000000	000000
2 1/2	3"	2 1/2	40	2	Zinc-Plated Steel	200 psi @ 72° F	000000000	00000	10	0000000	0000	000000000	00000	000000	00
3	3 5/8"	3	48	2	Zinc-Plated Steel	200 psi @ 72° F	000000000	00000	10	0000000	00000	000000000	00000	0000000	00000
4	4 3/4"	4	64	2	Zinc-Plated Steel	150 psi @ 72° F	000000000	00000	10	0000000	00000	000000000	00000	0000000	00000

Straight Sockets with Locking Levers, Barbed Hose

For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
Maximum Pressure: See table
Temperature Range: -65° to 250° F
Attachment Type: Use Band-and-Buckle Clamps
Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
Specifications Met: Fed. Spec. A-A-59326

Straight sockets with barbed end are also known as C couplers. Insert the barbed end into plastic or rubber hose and secure with a clamp.

Sockets with locking levers prevent accidental disconnection. The locks engage automatically when the coupling is connected. Press the locks simultaneously to disengage.

Sockets									Replacement Gaskets			Replacement Levers		Protective Plugs
Coupling Size	Socket ID	For Hose ID	Dash Size	No. of Levers	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each		Each
Aluminum with Brass Levers
1	1 7/16"	1"	16	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	000000	10	0000000	00000	000000000	000000	000000	00
1 1/4	1 13/16"	1 1/4"	20	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	00000	10	0000000	0000	000000000	00000	000000	00
1 1/2	2 1/8"	1 1/2"	24	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	00000	10	0000000	0000	000000000	00000	000000	00
2	2 1/2"	2"	32	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	00000	10	0000000	0000	000000000	00000	0000000	000000
2 1/2	3"	2 1/2"	40	2	Zinc-Plated Steel	200 psi @ 72° F	000000000	00000	10	0000000	0000	000000000	00000	000000	00
3	3 5/8"	3"	48	2	Zinc-Plated Steel	200 psi @ 72° F	000000000	00000	10	0000000	00000	000000000	00000	0000000	00000
4	4 3/4"	4"	64	2	Zinc-Plated Steel	150 psi @ 72° F	000000000	00000	10	0000000	00000	000000000	00000	0000000	00000
5	5 3/4"	5"	__	2	Zinc-Plated Steel	75 psi @ 72° F	000000000	000000	5	0000000	00000	000000000	00000	000000	00

Caps with Locking Levers

For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
Maximum Pressure: See table
Temperature Range: -65° to 250° F
Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
Specifications Met: Fed. Spec. A-A-59326

Sockets with locking levers prevent accidental disconnection. The locks engage automatically when the coupling is connected. Press the locks simultaneously to disengage.

Sockets							Replacement Gaskets			Replacement Levers
Coupling Size	Socket ID	No. of Levers	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each
Aluminum with Brass Levers
1	1 7/16"	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	000000	10	0000000	00000	000000000	000000
1 1/4	1 13/16"	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	00000	10	0000000	0000	000000000	00000
1 1/2	2 1/8"	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	00000	10	0000000	0000	000000000	00000
2	2 1/2"	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	00000	10	0000000	0000	000000000	00000
2 1/2	3"	2	Zinc-Plated Steel	200 psi @ 72° F	000000000	00000	10	0000000	0000	000000000	00000
3	3 5/8"	2	Zinc-Plated Steel	200 psi @ 72° F	000000000	00000	10	0000000	00000	000000000	00000
4	4 3/4"	2	Zinc-Plated Steel	150 psi @ 72° F	000000000	00000	10	0000000	00000	000000000	00000
5	5 3/4"	2	Zinc-Plated Steel	75 psi @ 72° F	000000000	000000	5	0000000	00000	000000000	00000

Straight Sockets, NPT Male Threaded Pipe

For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
Maximum Pressure: See table
Temperature Range: -65° to 250° F
Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
Specifications Met: 6 Coupling Size and smaller: Fed. Spec. A-A-59326

Sockets with male threaded end are also known as B couplers.

Sockets									Replacement Gaskets			Replacement Levers		Protective Plugs
Coupling Size	Socket ID	Pipe Size	Dash Size	No. of Levers	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each		Each
Aluminum with Brass Levers
1/2	15/16"	1/2	08	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	000000	10	0000000	00000	000000000	00000	000000	00
3/4	1 1/4"	1/2	08	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	00000	10	0000000	0000	000000000	0000	000000	00
3/4	1 1/4"	3/4	12	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000	000000	00
1	1 7/16"	1	16	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000	000000	00
1	1 7/16"	2	32	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	00000	10	0000000	0000	000000000	0000	000000	00
1 1/4	1 13/16"	1 1/4	20	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000	000000	00
1 1/2	2 1/8"	1	16	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000	000000	00
1 1/2	2 1/8"	1 1/2	24	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000	000000	00
2	2 1/2"	1	16	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	00000	10	0000000	0000	000000000	0000	0000000	000000
2	2 1/2"	1 1/2	24	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000	0000000	00000
2	2 1/2"	2	32	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000	0000000	00000
2 1/2	3"	2 1/2	40	2	Zinc-Plated Steel	200 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000	000000	00
3	3 5/8"	2	32	2	Zinc-Plated Steel	200 psi @ 72° F	00000000	00000	10	0000000	00000	000000000	0000	0000000	00000
3	3 5/8"	3	48	2	Zinc-Plated Steel	200 psi @ 72° F	00000000	00000	10	0000000	00000	000000000	0000	0000000	00000
4	4 3/4"	2	32	2	Zinc-Plated Steel	150 psi @ 72° F	000000000	00000	10	0000000	00000	000000000	0000	0000000	00000
4	4 3/4"	3	48	2	Zinc-Plated Steel	150 psi @ 72° F	00000000	000000	10	0000000	00000	000000000	0000	0000000	00000
4	4 3/4"	4	64	2	Zinc-Plated Steel	150 psi @ 72° F	00000000	00000	10	0000000	00000	000000000	0000	0000000	00000
5	5 3/4"	5	__	2	Zinc-Plated Steel	75 psi @ 72° F	000000000	000000	5	0000000	00000	000000000	0000	000000	00
6	6 15/16"	6	96	2	Zinc-Plated Steel	75 psi @ 72° F	00000000	000000	5	0000000	00000	000000000	00000	000000	00
8	8 7/8"	8	__	4	Zinc-Plated Steel	50 psi @ 72° F	000000000	000000	1	0000000	00000	000000000	00000	000000	00

Straight Sockets, NPT Female Threaded Pipe

For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
Maximum Pressure: See table
Temperature Range: -65° to 250° F
Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
Specifications Met: 6 Coupling Size and smaller: Fed. Spec. A-A-59326

Straight sockets with female threaded end are also known as D couplers.

Sockets									Replacement Gaskets			Replacement Levers		Protective Plugs
Coupling Size	Socket ID	Pipe Size	Dash Size	No. of Levers	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each		Each
Aluminum with Brass Levers
1/2	15/16"	1/2	08	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	000000	10	0000000	00000	000000000	00000	000000	00
3/4	1 1/4"	1/2	08	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	00000	10	0000000	0000	000000000	0000	000000	00
3/4	1 1/4"	3/4	12	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000	000000	00
1	1 7/16"	1	16	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000	000000	00
1 1/4	1 13/16"	1 1/4	20	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000	000000	00
1 1/2	2 1/8"	1	16	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000	000000	00
1 1/2	2 1/8"	1 1/2	24	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000	000000	00
2	2 1/2"	1	16	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	000000	10	0000000	0000	000000000	0000	0000000	000000
2	2 1/2"	1 1/2	24	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000	0000000	00000
2	2 1/2"	2	32	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000	0000000	00000
2 1/2	3"	2 1/2	40	2	Zinc-Plated Steel	200 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000	000000	00
3	3 5/8"	2	32	2	Zinc-Plated Steel	200 psi @ 72° F	00000000	00000	10	0000000	00000	000000000	0000	0000000	00000
3	3 5/8"	3	48	2	Zinc-Plated Steel	200 psi @ 72° F	00000000	00000	10	0000000	00000	000000000	0000	0000000	00000
4	4 3/4"	3	48	2	Zinc-Plated Steel	150 psi @ 72° F	00000000	000000	10	0000000	00000	000000000	0000	0000000	00000
4	4 3/4"	4	64	2	Zinc-Plated Steel	150 psi @ 72° F	00000000	00000	10	0000000	00000	000000000	0000	0000000	00000
5	5 3/4"	5	__	2	Zinc-Plated Steel	75 psi @ 72° F	000000000	000000	5	0000000	00000	000000000	0000	000000	00
6	6 15/16"	6	96	2	Zinc-Plated Steel	75 psi @ 72° F	00000000	000000	5	0000000	00000	000000000	00000	000000	00
8	8 7/8"	8	__	4	Zinc-Plated Steel	50 psi @ 72° F	000000000	000000	1	0000000	00000	000000000	00000	000000	00

Straight Sockets (Continuous Swivel), NPT Female Threaded Pipe

For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
Maximum Pressure: See table
Temperature Range: -65° to 250° F
Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
Specifications Met: Fed. Spec. A-A-59326

Straight sockets with female threaded end are also known as D couplers.

Plugs and sockets with continuous swivel are also known as live swivels. They rotate 360° before and after installation and can swivel continuously. Use them to prevent hose kinking.

Sockets									Replacement Gaskets			Replacement Levers		Protective Plugs
Coupling Size	Socket ID	Pipe Size	Dash Size	No. of Levers	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each		Each
Aluminum with Brass Levers
1 1/2	2 1/8"	1 1/2	24	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	0000000	10	0000000	00000	000000000	00000	000000	00
2	2 1/2"	2	32	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	000000	10	0000000	0000	000000000	0000	0000000	000000
3	3 5/8"	3	48	2	Zinc-Plated Steel	200 psi @ 72° F	000000000	000000	10	0000000	00000	000000000	0000	0000000	00000

Straight Sockets, Barbed Hose

For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
Maximum Pressure: See table
Temperature Range: -65° to 250° F
Attachment Type: Use Band-and-Buckle Clamps
Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
Specifications Met: 6 Coupling Size and smaller: Fed. Spec. A-A-59326

Straight sockets with barbed end are also known as C couplers. Insert the barbed end into plastic or rubber hose and secure with a clamp.

Sockets									Replacement Gaskets			Replacement Levers		Protective Plugs
Coupling Size	Socket ID	For Hose ID	Dash Size	No. of Levers	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each		Each
Aluminum with Brass Levers
1/2	15/16"	1/2"	08	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	000000	10	0000000	00000	000000000	00000	000000	00
3/4	1 1/4"	1/2"	08	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	00000	10	0000000	0000	000000000	0000	000000	00
3/4	1 1/4"	3/4"	12	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000	000000	00
1	1 7/16"	3/4"	12	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000	000000	00
1	1 7/16"	1"	16	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000	000000	00
1 1/4	1 13/16"	1 1/4"	20	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000	000000	00
1 1/2	2 1/8"	1"	16	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000	000000	00
1 1/2	2 1/8"	1 1/2"	24	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000	000000	00
1 1/2	2 1/8"	2"	32	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	00000	10	0000000	0000	000000000	0000	000000	00
2	2 1/2"	1 1/2"	24	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000	0000000	000000
2	2 1/2"	2"	32	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000	0000000	00000
2 1/2	3"	2 1/2"	40	2	Zinc-Plated Steel	200 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000	000000	00
3	3 5/8"	2"	32	2	Zinc-Plated Steel	200 psi @ 72° F	00000000	00000	10	0000000	00000	000000000	0000	0000000	00000
3	3 5/8"	3"	48	2	Zinc-Plated Steel	200 psi @ 72° F	00000000	00000	10	0000000	00000	000000000	0000	0000000	00000
4	4 3/4"	3"	48	2	Zinc-Plated Steel	150 psi @ 72° F	00000000	00000	10	0000000	00000	000000000	0000	0000000	00000
4	4 3/4"	4"	64	2	Zinc-Plated Steel	150 psi @ 72° F	00000000	00000	10	0000000	00000	000000000	0000	0000000	00000
5	5 3/4"	5"	__	2	Zinc-Plated Steel	75 psi @ 72° F	000000000	000000	5	0000000	00000	000000000	0000	000000	00
6	6 15/16"	6"	96	2	Zinc-Plated Steel	75 psi @ 72° F	00000000	000000	5	0000000	00000	000000000	00000	000000	00
8	8 7/8"	8"	__	4	Zinc-Plated Steel	50 psi @ 72° F	000000000	000000	1	0000000	00000	000000000	00000	000000	00

Straight Sockets (Continuous Swivel), Barbed Hose

For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
Maximum Pressure: See table
Temperature Range: -65° to 250° F
Attachment Type: Use Band-and-Buckle Clamps
Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
Specifications Met: Fed. Spec. A-A-59326

Straight sockets with barbed end are also known as C couplers. Insert the barbed end into plastic or rubber hose and secure with a clamp.

Plugs and sockets with continuous swivel are also known as live swivels. They rotate 360° before and after installation and can swivel continuously. Use them to prevent hose kinking.

Sockets									Replacement Gaskets			Replacement Levers		Protective Plugs
Coupling Size	Socket ID	For Hose ID	Dash Size	No. of Levers	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each		Each
Aluminum with Brass Levers
1 1/2	2 1/8"	1 1/2"	24	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	0000000	10	0000000	00000	000000000	00000	000000	00
2	2 1/2"	2"	32	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	000000	10	0000000	0000	000000000	0000	0000000	000000
3	3 5/8"	3"	48	2	Zinc-Plated Steel	200 psi @ 72° F	000000000	000000	10	0000000	00000	000000000	0000	0000000	00000

Straight Sockets, Flanged Pipe

For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
Maximum Pressure: See table
Temperature Range: -65° to 250° F
Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
Specifications Met:
Aluminum: ASME B16.24, Fed. Spec. A-A-59326
316 Stainless Steel: ASME B16.5, Fed. Spec. A-A-59326

Sockets with flanged end are also known as PFC couplers. Bolt the flanged end to another same-size flange with a gasket.

Sockets
									Bolt Hole					Replacement Gaskets			Replacement Levers		Protective Plugs
Coupling Size	Socket ID	Pipe Size	Dash Size	Flange OD	Pressure Class	No. of Levers	Max. Pressure	For Bolt Dia.	Dia.	No. of	Bolt Circle Dia.		Each	Pkg. Qty.		Pkg.		Each		Each
Aluminum with Brass Levers and Zinc-Plated Steel Pull Rings
Flat Flanged Connection Surface
2	2 1/2"	2	32	6"	150	2	250 psi @ 72° F	5/8"	3/4"	4	4 3/4"	000000000	0000000	10	0000000	00000	000000000	00000	0000000	000000
3	3 5/8"	3	48	7 1/2"	150	2	200 psi @ 72° F	5/8"	3/4"	4	6"	000000000	000000	10	0000000	00000	000000000	0000	0000000	00000
4	4 3/4"	4	64	9"	150	2	150 psi @ 72° F	5/8"	3/4"	8	7 1/2"	000000000	000000	10	0000000	00000	000000000	0000	0000000	00000
6	6 15/16"	6	96	11"	150	2	75 psi @ 72° F	3/4"	7/8"	8	9 1/2"	000000000	000000	5	0000000	00000	000000000	00000	000000	00

Straight Sockets, Butt-Weld Pipe

Butt Weld

For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
Maximum Pressure: See table
Temperature Range: -65° to 250° F
Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
Specifications Met: Fed. Spec. A-A-59326

Sockets with butt-weld end are also known as DWB couplers. They have a beveled end that forms a trough for welding, creating a strong, permanent connection.

Sockets										Replacement Gaskets			Replacement Levers		Protective Plugs
Coupling Size	Socket ID	Pipe Size	Dash Size	Wall Thick.	No. of Levers	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each		Each
Aluminum with Brass Levers
2	2 1/2"	2	32	0.15"	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	000000	10	0000000	00000	000000000	00000	0000000	000000
3	3 5/8"	3	48	0.22"	2	Zinc-Plated Steel	200 psi @ 72° F	000000000	00000	10	0000000	00000	000000000	0000	0000000	00000
4	4 3/4"	4	64	0.24"	2	Zinc-Plated Steel	150 psi @ 72° F	000000000	00000	10	0000000	00000	000000000	0000	0000000	00000

Straight Sockets, Socket-Connect Pipe

Socket Connect

For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
Maximum Pressure: See table
Temperature Range: -65° to 250° F
Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
Specifications Met: Fed. Spec. A-A-59326

Sockets with socket-connect end are also known as DWS couplers. They are easier to weld than butt-weld fittings because the fitting doesn’t need to align perfectly to the pipe. Slide pipe into the socket and weld for a strong, permanent connection.

Sockets										Replacement Gaskets			Replacement Levers		Protective Plugs
Coupling Size	Socket ID	Pipe Size	Dash Size	Socket Dp.	No. of Levers	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each		Each
Aluminum with Brass Levers
2	2 1/2"	2	32	11/16"	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	000000	10	0000000	00000	000000000	00000	0000000	000000
3	3 5/8"	3	48	11/16"	2	Zinc-Plated Steel	200 psi @ 72° F	000000000	00000	10	0000000	00000	000000000	0000	0000000	00000
4	4 3/4"	4	64	11/16"	2	Zinc-Plated Steel	150 psi @ 72° F	000000000	00000	10	0000000	00000	000000000	0000	0000000	00000
6	6 15/16"	6	96	7/8"	2	Zinc-Plated Steel	75 psi @ 72° F	000000000	000000	5	0000000	00000	000000000	00000	000000	00

Straight Socket Connectors

For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
Maximum Pressure: See table
Temperature Range: -65° to 250° F
Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
Specifications Met: Fed. Spec. A-A-59326

Socket connectors are also known as C × C couplers.

Sockets							Replacement Gaskets			Replacement Levers		Protective Plugs
Coupling Size	Socket ID	No. of Levers	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each		Each
Aluminum with Brass Levers
1	1 7/16"	4	Zinc-Plated Steel	250 psi @ 72° F	000000000	000000	10	0000000	00000	000000000	00000	000000	00
1 1/2	2 1/8"	4	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000	000000	00
2	2 1/2"	4	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000	0000000	000000
3	3 5/8"	4	Zinc-Plated Steel	200 psi @ 72° F	00000000	00000	10	0000000	00000	000000000	0000	0000000	00000
4	4 3/4"	4	Zinc-Plated Steel	150 psi @ 72° F	00000000	000000	10	0000000	00000	000000000	0000	0000000	00000

Straight Socket Reducers

For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
Maximum Pressure: See table
Temperature Range: -65° to 250° F
Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
Specifications Met: Fed. Spec. A-A-59326

Socket reducers are also known as C × C couplers.

Sockets
Coupling Size		Socket ID							Protective Plugs
(A)	(B)	(A)	(B)	No. of Levers	Pull Ring Material	Max. Pressure		Each		Each
Aluminum with Brass Levers
3	2	3 5/8"	2 1/2"	4	Zinc-Plated Steel	200 psi @ 72° F	000000000	0000000	0000000	000000
4	3	4 3/4"	3 5/8"	4	Zinc-Plated Steel	150 psi @ 72° F	000000000	000000	0000000	00000

Replacement Gasket for 3 Coupling Size Sockets (10/Pkg.)	0000000	Pkg.	000000
Brass Replacement Lever for 3 and 4 Coupling Size Sockets	000000000	Each	0000
Replacement Gasket for 4 Coupling Size Sockets (10/Pkg.)	0000000	Pkg.	00000
Brass Replacement Lever for 2 Coupling Size Sockets	000000000	Each	0000
Replacement Gasket for 2 Coupling Size Sockets (10/Pkg.)	0000000	Pkg.	0000

Straight Plug-to-Socket Reducing Adapters

For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
Maximum Pressure: See table
Temperature Range: -65° to 250° F
Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
Specifications Met: Fed. Spec. A-A-59326

Plug-to-socket reducing adapters are also known as A × C couplers.

Reducing Adapters
Coupling Size									Replacement Gaskets			Protective Plugs
(A)	(B)	Plug OD (A)	Socket ID (B)	No. of Levers	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each
Aluminum with Brass Levers
1 1/2	1	2 1/8"	1 7/16"	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	000000	10	0000000	00000	000000	00
2	1 1/2	2 1/2"	2 1/8"	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	00000	10	0000000	0000	000000	00
2	3	2 1/2"	3 5/8"	2	Zinc-Plated Steel	200 psi @ 72° F	00000000	00000	10	0000000	00000	0000000	000000
3	2	3 5/8"	2 1/2"	2	Zinc-Plated Steel	200 psi @ 72° F	00000000	00000	10	0000000	0000	0000000	00000
3	4	3 5/8"	4 3/4"	2	Zinc-Plated Steel	150 psi @ 72° F	00000000	00000	10	0000000	00000	0000000	00000
4	3	4 3/4"	3 5/8"	2	Zinc-Plated Steel	150 psi @ 72° F	00000000	00000	10	0000000	00000	0000000	00000

Brass Replacement Lever for 3 and 4 Coupling Size Sockets	Each	00000
Brass Replacement Lever for 2 Coupling Size Sockets	Each	0000
Brass Replacement Lever for 1 1/2 Coupling Size Sockets	Each	0000
Brass Replacement Lever for 1 Coupling Size Sockets	Each	0000

Straight API Valve-to-Plug Adapters

For Use With: Diesel Fuel, Gasoline, Hydraulic Fluid
Maximum Pressure: 75 psi @ 72° F
Temperature Range: -40° to 200° F

API valve-to-plug adapters are used to offload tankers with an API valve.

Adapters
Coupling Size							Replacement Gaskets
(A)	(B)	Plug OD (B)	No. of Levers	Pull Ring Material		Each		Each
Aluminum with Brass Levers
4	4	4 3/4"	2	Zinc-Plated Steel	0000000	0000000	0000000	00000

Straight API Valve-to-Plug Adapters with Sight Glass

For Use With: Diesel Fuel, Gasoline, Hydraulic Fluid
Maximum Pressure: 75 psi @ 72° F
Temperature Range: -40° to 200° F

API valve-to-plug adapters are used to offload tankers with an API valve.

Adapters with a sight glass let you inspect the fluid in your line.

Adapters
Coupling Size							Replacement Gaskets
(A)	(B)	Plug OD (B)	No. of Levers	Pull Ring Material		Each		Each
Aluminum with Brass Levers
4	4	4 3/4"	2	Zinc-Plated Steel	0000000	0000000	0000000	00000

Straight API Valve-to-Plug Reducing Adapters

For Use With: Diesel Fuel, Gasoline, Hydraulic Fluid
Maximum Pressure: 75 psi @ 72° F
Temperature Range: -40° to 200° F

API valve-to-plug adapters are used to offload tankers with an API valve.

Reducing Adapters
Coupling Size							Replacement Gaskets
(A)	(B)	Plug OD (B)	No. of Levers	Pull Ring Material		Each		Each
Aluminum with Brass Levers
4	3	3 5/8"	2	Zinc-Plated Steel	0000000	0000000	0000000	00000

Straight API Valve-to-Plug Reducing Adapters with Sight Glass

For Use With: Diesel Fuel, Gasoline, Hydraulic Fluid
Maximum Pressure: 75 psi @ 72° F
Temperature Range: -40° to 200° F

API valve-to-plug adapters are used to offload tankers with an API valve.

Adapters with a sight glass let you inspect the fluid in your line.

Reducing Adapters
Coupling Size							Replacement Gaskets
(A)	(B)	Plug OD (B)	No. of Levers	Pull Ring Material		Each		Each
Aluminum with Brass Levers
4	3	3 5/8"	2	Zinc-Plated Steel	0000000	0000000	0000000	00000

90° Elbow Sockets, NPT Female Threaded Pipe

For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
Maximum Pressure: See table
Temperature Range: -65° to 250° F
Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
Specifications Met: Fed. Spec. A-A-59326

90° elbow sockets with female threaded end are also known as LD couplers.

Sockets									Replacement Gaskets			Replacement Levers		Protective Plugs
Coupling Size	Socket ID	Pipe Size	Dash Size	No. of Levers	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each		Each
Aluminum with Brass Levers
1	1 7/16"	1	16	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	000000	10	0000000	00000	000000000	00000	000000	00
1 1/2	2 1/8"	1 1/2	24	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000	000000	00
2	2 1/2"	2	32	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000	0000000	000000
3	3 5/8"	3	48	2	Zinc-Plated Steel	200 psi @ 72° F	00000000	00000	10	0000000	00000	000000000	0000	0000000	00000
4	4 3/4"	4	64	2	Zinc-Plated Steel	150 psi @ 72° F	00000000	000000	10	0000000	00000	000000000	0000	0000000	00000

90° Elbow Sockets, Barbed Hose

For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
Maximum Pressure: See table
Temperature Range: -65° to 250° F
Attachment Type: Use Band-and-Buckle Clamps
Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
Specifications Met: Fed. Spec. A-A-59326

90° elbow sockets with barbed end are also known as CL couplers. Insert the barbed end into plastic or rubber hose and secure with a clamp.

Sockets									Replacement Gaskets			Replacement Levers		Protective Plugs
Coupling Size	Socket ID	For Hose ID	Dash Size	No. of Levers	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each		Each
Aluminum with Brass Levers
1	1 7/16"	1"	16	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	000000	10	0000000	00000	000000000	00000	000000	00
1 1/2	2 1/8"	1 1/2"	24	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000	000000	00
2	2 1/2"	2"	32	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000	0000000	000000
3	3 5/8"	3"	48	2	Zinc-Plated Steel	200 psi @ 72° F	00000000	00000	10	0000000	00000	000000000	0000	0000000	00000
4	4 3/4"	4"	64	2	Zinc-Plated Steel	150 psi @ 72° F	00000000	000000	10	0000000	00000	000000000	0000	0000000	00000

Caps

For Use With: Citric Acid, Diesel Fuel, Gasoline, Hydraulic Fluid
Maximum Pressure: See table
Temperature Range: -65° to 250° F
Compatible With: Andrews Cam-and-Groove, Dixon Cam-and-Groove, Ever-Tite Cam-and-Groove, PT Coupling Cam-and-Groove
Specifications Met: 6 Coupling Size and smaller: Fed. Spec. A-A-59326

Sockets							Replacement Gaskets			Replacement Levers
Coupling Size	Socket ID	No. of Levers	Pull Ring Material	Max. Pressure		Each	Pkg. Qty.		Pkg.		Each
Aluminum with Brass Levers
1/2	15/16"	2	Zinc-Plated Steel	250 psi @ 72° F	000000000	000000	10	0000000	00000	000000000	00000
3/4	1 1/4"	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000
1	1 7/16"	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000
1 1/4	1 13/16"	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000
1 1/2	2 1/8"	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000
2	2 1/2"	2	Zinc-Plated Steel	250 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000
2 1/2	3"	2	Zinc-Plated Steel	200 psi @ 72° F	00000000	00000	10	0000000	0000	000000000	0000
3	3 5/8"	2	Zinc-Plated Steel	200 psi @ 72° F	00000000	00000	10	0000000	00000	000000000	0000
4	4 3/4"	2	Zinc-Plated Steel	150 psi @ 72° F	00000000	00000	10	0000000	00000	000000000	0000
5	5 3/4"	2	Zinc-Plated Steel	75 psi @ 72° F	000000000	00000	5	0000000	00000	000000000	0000
6	6 15/16"	2	Zinc-Plated Steel	75 psi @ 72° F	00000000	000000	5	0000000	00000	000000000	00000
8	8 7/8"	4	Zinc-Plated Steel	50 psi @ 72° F	000000000	000000	1	0000000	00000	000000000	00000

Email Us

How to Identify and Measure Fittings

Metal Cam-and-Groove Hose Couplings for Water

Metal Cam-and-Groove Hose Couplings for Chemicals and Petroleum