Remove oxidation, discoloration, and heat stains from most metals without causing pitting or other surface damage.

Designed for use in Fed. Spec. Class 100 and ISO Class 5 clean rooms, these cleaners won't leave a residue that could attract contaminants. They come sterilized and double bagged.

These low-foaming cleaners won't damage your steam cleaner or pressure washer. Use them on hard, nonporous surfaces.

Less harsh than general purpose electrical cleaners, these cleaners are suitable for the delicate contacts in electronics and printed circuit boards.

Designed to be used together to improve the performance of electrical connections, cleaners remove oxidation and corrosion on connections while sealants coat them to prevent oxidation and corrosion.

Chill individual electronic components on a circuit board to troubleshoot one circuit at a time.

Dissolve scale and mineral buildup in drinking water systems with these scale removers. They meet NSF/ANSI Standard 60 for use with components that come into contact with drinking water.

Remove scale and mineral deposits without damaging aluminum, brass, and other soft metals commonly found in pumps and heat exchangers.

In addition to cleaning steam and hot water boilers, these conditioners control foam and pH levels to improve boiler efficiency and reduce energy costs.

Spray on all types of metal molds to eliminate moisture, dirt, oils, and release agents.

Kill bacteria, viruses, and fungi.

These disinfectants are NSF registered D2 for use in food-processing environments.

These disinfectants contain quaternary ammonium compounds—also known as quats—to kill bacteria, viruses, and fungi on hard, nonporous surfaces. They’re commonly used to clean laboratories and areas that are regularly exposed to pathogens, such as hospital rooms.

Free of chlorine, phosphates, bleach, VOC's, and other harmful chemicals, these cleaners use thyme oil to naturally kill bacteria and viruses while removing dirt and odors to prevent the spread of illness.

Remove oil- or solvent-based residue from metal, plastic, wood, carpet, upholstery, and painted surfaces.

The handle makes it easy to brush by hand. Clean delicate surfaces inside tubes, pipes, and holes.

The handle makes it easy to brush by hand. Clean delicate surfaces inside tubes, pipes, and holes.

Attach the shank to a handle or power tool.

The handle makes it easy to brush by hand.

These brushes withstand temperatures up to 500°.

Grip the handles on these brushes for extra leverage when cleaning tubes, pipes, and holes by hand.

Remove light-to-medium rust and stains and small burs from tubes, pipes, and holes.

Attach the shank to a handle or power tool.

Remove light to medium rust, stains, and small burs from tubes, pipes, and holes.

Attach the shank to a handle or power tool.

Use for tasks such as removing weld slag, heavy surface contamination, and large burs from tubes, pipes, and holes.

Bristles inside the housing and a protruding brush clean the inside and outside of tubes in one step. Sets include brushes for three different tube sizes.

Clean the inside and outside of a tube with one brush.

Use on delicate surfaces.

Clean delicate surfaces in hard-to-reach spots. Use these brushes to remove light-to-medium rust and stains and small burs.

Use for tasks such as edge rounding and removing weld slag, heavy surface contamination, and large burs. The small brush face can access hard-to-reach spots.

The small brush face can access hard-to-reach spots to remove light-to-medium rust and stains and small burs.

Remove light-to-medium rust and stains and small burs with these flexible-bristle brushes.

Abrasive grains are embedded in the entire length of the bristles so the sides act like flexible files. These brushes remove workpiece material as well as surface contamination in a single step.

These brushes conform to corners, curves, and irregular surfaces to remove light-to-medium rust and stains and small burs.

Use on delicate surfaces.

Use on delicate surfaces.

Use on delicate surfaces.

Two rows of bristles cover more surface area.

The bristles are partially twisted in alternating directions, which prevents them from separating.

The rigid, front-facing bristles are partially twisted for added cleaning power when removing debris from flat surfaces.

Remove light-to-medium rust and stains and small burs.

Work in tiny spaces and on very small parts to remove light-to-medium rust and stains and small burs.

Made of phosphorus bronze that is Factory Mutual approved, the bristles on these brushes inhibit sparking and are nonmagnetic and corrosion resistant.

Turn the handle to expose more bristles as they wear.

The handle curves sharply for cleaning in hard-to-reach spots.

Made of phosphorus bronze that is Factory Mutual approved, the bristles on these brushes inhibit sparking and are nonmagnetic and corrosion resistant.

Use on contours and angles or for reaching into cracks and corners.

Rigid, partially twisted bristles handle tasks such as edge rounding and removing weld slag, heavy surface contamination, and large burs. Also known as knot-wire brushes.

Bristles are partially twisted in alternating directions, which prevents them from separating.

Made of phosphorus bronze that is Factory Mutual approved, these brushes inhibit sparking and are nonmagnetic and corrosion resistant.

Remove light-to-medium rust and stains and small burs with these flexible-bristle brushes.

Also known as aqueous cleaning solutions, these water-based solutions are for general purpose cleaning.

These petroleum-based, ammonia-free solutions are the strongest we offer.

Leave a corrosion-resistant film on parts after washing.

These brushes have steel bristles for removing weld slag and heavy surface contamination.

Clean grease and oil from parts.