Mounting Style Mounting Style |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
Handle Shape Handle Shape |
|---|
|
Screw Size Screw Size |
|---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
About AC to AC Voltage Transformers
For single-phase equipment, use this formula to find power output: VA = Volts × Amps
For three-phase equipment, use this formula to find power output: VA = Volts × Amps × 1.73
More
Push and Pull Plates
Protect doors while making them easy to open. Plates have beveled edges.
Brass has good corrosion resistance and is nonmagnetic.
For technical drawings and 3-D models, click on a part number.
Mounting Plate | ||||||
|---|---|---|---|---|---|---|
| Ht. | Wd. | Thick. | Mounting Fasteners Included | Mounting Style | Polished Brass | |
| 15" | 3 1/2" | 0.05" | Yes | Unthreaded Through Holes | 0000000 | |
| 15" | 3 1/2" | 1/8" | Yes | Unthreaded Through Holes | 0000000 | |
| 16" | 4" | 0.05" | Yes | Unthreaded Through Holes | 0000000 | |
| 16" | 4" | 1/8" | Yes | Unthreaded Through Holes | 0000000 | |
| 20" | 4" | 0.05" | Yes | Unthreaded Through Holes | 0000000 | |
| 20" | 4" | 1/8" | Yes | Unthreaded Through Holes | 0000000 | |
Mouning Plate | Handle | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Thick. | Dia. | Ht. | Proj. | Mounting Fasteners Included | Mounting Style | Polished Brass | |
| 15" | 3 1/2" | 0.05" | 5/8" | 5 1/2" | 1 3/8" | Yes | Unthreaded Through Holes | 0000000 | |
| 15" | 3 1/2" | 0.05" | 3/4" | 8" | 2 1/2" | Yes | Unthreaded Through Holes | 0000000 | |
| 16" | 4" | 0.05" | 5/8" | 5 1/2" | 1 3/8" | Yes | Unthreaded Through Holes | 0000000 | |
| 16" | 4" | 0.05" | 3/4" | 8" | 2 1/2" | Yes | Unthreaded Through Holes | 0000000 | |
Mouning Plate | Handle | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Thick. | Ht. | Thick. | Proj. | Mounting Fasteners Included | Mounting Style | Polished Brass | |
| 15" | 3 1/2" | 0.05" | 5 1/2" | 1/2" | 1 3/8" | Yes | Unthreaded Through Holes | 0000000 | |
| 15" | 3 1/2" | 1/8" | 5 1/2" | 1/2" | 1 3/8" | Yes | Unthreaded Through Holes | 0000000 | |
| 16" | 4" | 0.05" | 5 1/2" | 1/2" | 1 3/8" | Yes | Unthreaded Through Holes | 0000000 | |
| 16" | 4" | 1/8" | 5 1/2" | 1/2" | 1 3/8" | Yes | Unthreaded Through Holes | 0000000 | |
Mounting Plates for Door Handles and Knobs
Use these mounting plates to reinforce the door around your handle to guard against forced entry. Select a mounting plate with the correct backset distance (the distance from the door’s edge to the center of your handle's mounting hole) for your door.
For technical drawings and 3-D models, click on a part number.
Door Hole Covers
Conceal up to 2 1/8" dia. holes created when you remove a door handle.
For technical drawings and 3-D models, click on a part number.
| Finish | OD | For Max. Through Hole Dia. | Each | |
| Polished Brass | 2 5/8" | 2 1/8" | 00000000 | 00000 |
Gap Covers for Door Handles and Knobs
Hide gaps around your handles.
For technical drawings and 3-D models, click on a part number.
| Finish | OD | ID | Each | |
| Polished Brass | 3 1/2" | 2 1/8" | 00000000 | 00000 |
Gap Covers for Deadbolt Door Locks
Eliminate gaps around your deadbolt locks.
For technical drawings and 3-D models, click on a part number.
| Finish | OD | ID | Each | |
| Polished Brass | 3 1/2" | 1 1/2" | 00000000 | 00000 |
Strike Plates for Door Handles and Knobs
Plates with extended lip prevent latches from damaging door frames when your door is set deep in the frame.
For technical drawings and 3-D models, click on a part number.
Electric Door Strike Plates for Door Handles and Knobs
All of these strike plates can be used with door handles and knobs. The ROFU 1505 and Rutherford S65 strike plates can also be used with pry-resistant door handles and knobs. Use them all to regulate access to doors by holding or releasing a lock's latch with a signal from a push-button switch, keypad control, or card reader. Strike plates must be hardwired.
When replacing an electric strike plate, first select one that will work with your lock type so that the latch will align properly with the plate. Next, choose a strike plate that can accommodate your latch bolt projection (how far the latch bolt extends from the door's edge). Then, match the size of the strike plate to your door frame cutout. If you don't find an exact match, choose a strike plate with a smaller size than your cutout.
For technical drawings and 3-D models, click on a part number.
For Cutout | Faceplate | Voltage | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Latch Bolt Projection | Ht. | Wd. | Dp. | Ht. | Wd. | Holding Strength, lbs. | AC | DC | For Door Frame Material | For Door Swing Direction | Mounting Hardware Included | Appearance | Finish | Each | |
ROFU 1505 | |||||||||||||||
| 5/8" | 3 1/2" | 7/8" | 1 1/8" | 5 7/8" | 1 1/4" | 1,000 | 8V-16V | 3V-6V | Wood | Left, Right | Yes | Dull | Brass | 0000000 | 0000000 |
Voltage | ||||
|---|---|---|---|---|
| Input | Output | Cannot Be Sold To | Each | |
| 120V AC | 8/16/24V AC | CA | 0000000 | 000000 |
Electric Door Strike Plates for Surface Mounted Locks
If your lock latches to a mechanism that's mounted to the door's surface instead of in the door jamb, select this strike plate. It regulates access to doors by holding or releasing a lock's latch with a signal from a push-button switch, keypad control, or card reader. Strike plates must be hardwired.
When replacing an electric strike plate, first select one that will work with your lock type so that the latch will align properly with the plate. Next, choose a strike plate that can accommodate your latch bolt projection (how far the latch bolt extends from the door's edge). Then, match the size of the strike plate to your door frame cutout. If you don't find an exact match, choose a strike plate with a smaller size than your cutout.
For technical drawings and 3-D models, click on a part number.
For Cutout | Voltage | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Latch Bolt Projection | Ht. | Wd. | Dp. | Holding Strength | AC | DC | Finish | For Door Frame Material | For Door Swing Direction | Mounting Hardware Included | Each | |
Trine 00 | ||||||||||||
| 5/8" | 2 1/8" | 1 3/16" | 3 5/16" | 1,000 lbs. | 8V-16V | 4V-6V | Dull Brass | Metal, Wood | Left, Right | Yes | 0000000 | 0000000 |
Door Kick Plates
Also known as door plates, armor plates, and mop plates, kick plates protect the base of a door from damage caused by foot traffic and equipment. Choose a kick plate with a width that is 2” narrower than the overall width of the door to prevent interference with the door’s opening and closing. All can be used outdoors.
Screw-in plates mount with fasteners.
Brass and bronze plates provide a more decorative finish than other plates. They have good corrosion resistance and are nonmagnetic.
For technical drawings and 3-D models, click on a part number.
| Ht. | Thick. | For Use Outdoors | Mounting Fasteners Included | Polished Brass | |
24" Width | |||||
|---|---|---|---|---|---|
| 34" | 0.05" | Yes | Yes | 000000 | |
28" Width | |||||
| 6" | 0.05" | Yes | Yes | 000000 | |
| 8" | 0.05" | Yes | Yes | 000000 | |
| 10" | 0.05" | Yes | Yes | 000000 | |
| 12" | 0.05" | Yes | Yes | 000000 | |
| 36" | 0.05" | Yes | Yes | 000000 | |
| 42" | 0.05" | Yes | Yes | 000000 | |
30" Width | |||||
| 6" | 0.05" | Yes | Yes | 000000 | |
| 8" | 0.05" | Yes | Yes | 000000 | |
| 10" | 0.05" | Yes | Yes | 0000000 | |
| 12" | 0.05" | Yes | Yes | 0000000 | |
34" Width | |||||
| 6" | 0.05" | Yes | Yes | 0000000 | |
| 8" | 0.05" | Yes | Yes | 0000000 | |
| 10" | 0.05" | Yes | Yes | 0000000 | |
| 12" | 0.05" | Yes | Yes | 0000000 | |
| 16" | 0.05" | Yes | Yes | 0000000 | |
| 34" | 0.05" | Yes | Yes | 0000000 | |
| 36" | 0.05" | Yes | Yes | 0000000 | |
| 46" | 0.05" | Yes | Yes | 0000000 | |
36" Width | |||||
| 8" | 0.05" | Yes | Yes | 0000000 | |
| 10" | 0.05" | Yes | Yes | 0000000 | |
| 12" | 0.05" | Yes | Yes | 0000000 | |
48" Width | |||||
| 8" | 0.05" | Yes | Yes | 0000000 | |
| 12" | 0.05" | Yes | Yes | 0000000 | |
| 16" | 0.05" | Yes | Yes | 0000000 | |