Brass Shim Stock | McMaster-Carr

Filter by

Material

System of Measurement

Thickness

Form

Width

Shape

Length

Backing Type

Temper Rating

Material Thickness

Number of Pieces

Sold As

Magnetic Properties

Minimum Hardness

Performance

Certificate Type

Material Certificate with Traceable Lot Number and Test Report

Specifications Met

Hardness

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

REACH

RoHS

Maximum Shim Size

Layer Thickness

Number of Layers

Hole Size

199 Products

Shim Stock

Cut into custom shapes to create shims that suit your needs. With thickness tolerances as fine as a strand of hair, the shims will precisely align, space, and level components on dies, presses, and machinery.

You can stack multiple shims to achieve your exact thickness, but stacking more than four may cause them to shift. Remember, fewer shims are better, so a couple of thicker shims are more stable than a bunch of thin shims.

Brass—Picked for its warm, polished look. Similar to 18-8 stainless steel, it resists rusting in wet and outdoor areas.

Bronze—The choice for marine environments, it won't rust or deteriorate from exposure to salt water. It offers better corrosion resistance than 316 stainless steel but isn't as strong.

Temper Rating—Choose half hard to create shims that you’ll need to bend or shape. Opt for full hard to make stronger shims that will maintain their shape under loads.

				Certificate
	Thk.	Thk. Tolerance	Temper Rating	Type	Form	Specs. Met	Form		Each
Brass







				6" Wide × 25" Long

				0.005"	-0.0005" to 0.0005"	1/2 Hard	Material Certificate	Paper	ASTM B36	Sheet	00000000	000000


				0.01"	-0.001" to 0.001"	1/2 Hard	Material Certificate	Paper	ASTM B36	Sheet	00000000	00000
				0.012"	-0.0012" to 0.0012"	1/2 Hard	Material Certificate	Paper	ASTM B36	Sheet	00000000	00000
				0.015"	-0.0015" to 0.0015"	1/2 Hard	Material Certificate	Paper	ASTM B36	Sheet	00000000	00000
				0.02"	-0.002" to 0.002"	1/2 Hard	Material Certificate	Paper	ASTM B36	Sheet	00000000	00000
				0.025"	-0.001" to 0.001"	1/2 Hard	Material Certificate	Paper	ASTM B36	Sheet	00000000	00000
				0.031"	-0.0015" to 0.0015"	1/2 Hard	Material Certificate	Paper	ASTM B36	Sheet	00000000	00000




						6" Wide × 50" Long

						0.001"	-0.0001" to 0.0001"	1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	00000000	00000


						0.002"	-0.0002" to 0.0002"	1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	00000000	00000
						0.003"	-0.0003" to 0.0003"	1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	00000000	00000
						0.004"	-0.0004" to 0.0004"	1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	00000000	00000
						0.005"	-0.0005" to 0.0005"	1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	00000000	00000
						0.006"	-0.0006" to 0.0006"	1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	00000000	00000
						0.007"	-0.0007" to 0.0007"	1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	00000000	00000
						0.008"	-0.0008" to 0.0008"	1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	00000000	00000
						0.01"	-0.001" to 0.001"	1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	00000000	00000
						0.012"	-0.0012" to 0.0012"	1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	00000000	00000
						0.015"	-0.0015" to 0.0015"	1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	00000000	00000


						0.02"	-0.002" to 0.002"	1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	00000000	00000
						0.025"	-0.0025" to 0.0025"	1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	00000000	00000
						0.031"	-0.0031" to 0.0031"	1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	00000000	00000




								6" Wide × 60" Long

								0.001"	-0.0001" to 0.0001"	1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	0000000	00000


								0.0015"	-0.00015" to 0.00015"	1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	0000000	00000
								0.002"	-0.0002" to 0.0002"	1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	0000000	00000
								0.003"	-0.0003" to 0.0003"	1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	0000000	00000
								0.004"	-0.0004" to 0.0004"	1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	0000000	00000
								0.005"	-0.0005" to 0.0005"	1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	0000000	00000
								0.006"	-0.0006" to 0.0006"	1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	0000000	00000
								0.007"	-0.0007" to 0.0007"	1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	0000000	00000
								0.008"	-0.0008" to 0.0008"	1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	0000000	00000
								0.009"	-0.0009" to 0.0009"	1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	0000000	00000
								0.01"	-0.001" to 0.001"	1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	0000000	00000


								0.012"	-0.0012" to 0.0012"	1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	0000000	00000
0.015"								-0.0015" to 0.0015"	1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	0000000	00000
0.02"	-0.002" to 0.002"							1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	0000000	00000
0.025"	-0.0025" to 0.0025"							1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	0000000	00000
0.031"	-0.0031" to 0.0031"							1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	000000	00000




		6" Wide × 100" Long

		0.001"	-0.0001" to 0.0001"					1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	0000000	00000


		0.0015"	-0.00015" to 0.00015"					1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	0000000	00000
		0.002"	-0.0002" to 0.0002"					1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	0000000	00000
		0.003"	-0.0003" to 0.0003"					1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	0000000	00000
		0.004"	-0.0004" to 0.0004"					1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	0000000	00000
		0.005"	-0.0005" to 0.0005"					1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	0000000	00000
		0.006"	-0.0006" to 0.0006"					1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	0000000	00000
		0.007"	-0.0007" to 0.0007"					1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	0000000	00000
		0.008"	-0.0008" to 0.0008"					1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	0000000	00000
		0.009"	-0.0009" to 0.0009"	1/2 Hard				Material Certificate	Paper	ASTM B36	Roll	0000000	00000
		0.01"	-0.001" to 0.001"	1/2 Hard	Material Certificate			Paper	ASTM B36	Roll	0000000	00000


		0.012"	-0.0012" to 0.0012"	1/2 Hard	Material Certificate			Paper	ASTM B36	Roll	0000000	00000
		0.015"	-0.0015" to 0.0015"	1/2 Hard	Material Certificate			Paper	ASTM B36	Roll	0000000	00000
		0.018"	-0.0018" to 0.0018"	1/2 Hard	Material Certificate			Paper	ASTM B36	Roll	0000000	000000
		0.02"	-0.002" to 0.002"	1/2 Hard	Material Certificate			Paper	ASTM B36	Roll	0000000	000000
		0.025"	-0.0025" to 0.0025"	1/2 Hard	Material Certificate			Paper	ASTM B36	Roll	0000000	000000
		0.031"	-0.0031" to 0.0031"	1/2 Hard	Material Certificate			Paper	ASTM B36	Roll	0000000	000000




				8" Wide × 12" Long

				0.001"	-0.0001" to 0.0001"			1/2 Hard	Material Certificate	Paper	ASTM B36	Sheet	00000000	0000


				0.002"	-0.0002" to 0.0002"			1/2 Hard	Material Certificate	Paper	ASTM B36	Sheet	00000000	0000
				0.003"	-0.0003" to 0.0003"			1/2 Hard	Material Certificate	Paper	ASTM B36	Sheet	00000000	0000
				0.004"	-0.0004" to 0.0004"			1/2 Hard	Material Certificate	Paper	ASTM B36	Sheet	00000000	0000
				0.005"	-0.0005" to 0.0005"			1/2 Hard	Material Certificate	Paper	ASTM B36	Sheet	00000000	0000
				0.006"	-0.0003" to 0.0003"			1/2 Hard	Material Certificate	Paper	ASTM B36	Sheet	0000000	00000
				0.007"	-0.0007" to 0.0007"			1/2 Hard	Material Certificate	Paper	ASTM B36	Sheet	00000000	00000
				0.008"	-0.0004" to 0.0004"	1/2 Hard		Material Certificate	Paper	ASTM B36	Sheet	0000000	00000
				0.009"	-0.0007" to 0.0007"	1/2 Hard	Material Certificate	Paper	ASTM B36	Sheet	0000000	00000
				0.01"	-0.001" to 0.001"	1/2 Hard	Material Certificate	Paper	ASTM B36	Sheet	00000000	00000
				0.012"	-0.0012" to 0.0012"	1/2 Hard	Material Certificate	Paper	ASTM B36	Sheet	00000000	00000


				0.015"	-0.0015" to 0.0015"	1/2 Hard	Material Certificate	Paper	ASTM B36	Sheet	00000000	00000
				0.02"	-0.002" to 0.002"	1/2 Hard	Material Certificate	Paper	ASTM B36	Sheet	00000000	00000
				0.025"	-0.001" to 0.001"	1/2 Hard	Material Certificate	Paper	ASTM B36	Sheet	0000000	00000
				0.031"	-0.0015" to 0.0015"	1/2 Hard	Material Certificate	Paper	ASTM B36	Sheet	0000000	00000




						12" Wide × 120" Long

						0.001"	-0.0001" to 0.0001"	1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	0000000	00000


						0.002"	-0.0002" to 0.0002"	1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	0000000	00000
						0.003"	-0.0003" to 0.0003"	1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	0000000	00000
						0.004"	-0.0004" to 0.0004"	1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	0000000	00000
						0.005"	-0.0005" to 0.0005"	1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	0000000	00000
						0.006"	-0.0006" to 0.0006"	1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	0000000	00000
0.008"						-0.0008" to 0.0008"	1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	0000000	000000
0.01"	-0.001" to 0.001"					1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	0000000	000000
0.012"	-0.0012" to 0.0012"					1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	0000000	000000
0.015"	-0.0015" to 0.0015"					1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	0000000	000000
0.02"	-0.002" to 0.002"					1/2 Hard	Material Certificate	Paper	ASTM B36	Roll	0000000	000000




						24" Wide × 24" Long

						0.005"	-0.0005" to 0.0005"	1/2 Hard	Material Certificate	Paper	ASTM B36	Sheet	00000000	00000


						0.01"	-0.001" to 0.001"	1/2 Hard	Material Certificate	Paper	ASTM B36	Sheet	00000000	00000


						Bronze







										6" Wide × 25" Long

		0.016"								-0.001" to 0.001"	Spring	Material Certificate	Paper	ASTM B103, SAE AMS4510	Sheet	00000000	00000


		0.02"	-0.001" to 0.001"							Spring	Material Certificate	Paper	ASTM B103, SAE AMS4510	Sheet	00000000	00000
		0.025"	-0.001" to 0.001"							Spring	Material Certificate	Paper	ASTM B103, SAE AMS4510	Sheet	00000000	00000
		0.032"	-0.0015" to 0.0015"							Spring	Material Certificate	Paper	ASTM B103, SAE AMS4510	Sheet	00000000	00000




										6" Wide × 50" Long

										0.005"	-0.0003" to 0.0003"	Spring	Material Certificate	Paper	ASTM B103	Roll	0000000	00000


										0.008"	-0.0004" to 0.0004"	Spring	Material Certificate	Paper	ASTM B103	Roll	0000000	00000
										0.01"	-0.0007" to 0.0007"	Spring	Material Certificate	Paper	ASTM B103	Roll	0000000	00000
										0.013"	-0.001" to 0.001"	Spring	Material Certificate	Paper	ASTM B103	Roll	0000000	00000
										0.016"	-0.001" to 0.001"	Spring	Material Certificate	Paper	ASTM B103	Roll	0000000	00000
										0.02"	-0.001" to 0.001"	Spring	Material Certificate	Paper	ASTM B103	Roll	0000000	00000
										0.025"	-0.001" to 0.001"	Spring	Material Certificate	Paper	ASTM B103	Roll	0000000	00000
										0.032"	-0.0015" to 0.0015"	Spring	Material Certificate	Paper	ASTM B103	Roll	0000000	000000
										0.04"	-0.002" to 0.002"	Spring	Material Certificate	Paper	ASTM B103	Sheet	0000000	000000

Shim Stock Assortments

When you don’t know the exact shim thickness you’ll need, keep shim stock in multiple thicknesses on hand so you always have the right one. Cut this shim stock into custom shapes to create shims that suit your needs. With thickness tolerances as fine as a strand of hair, the shims will precisely align, space, and level components on dies, presses, and machinery.

Shim Stock

Brass—Picked for its warm, polished look. Similar to 18-8 stainless steel, it resists rusting in wet and outdoor areas.

Bronze—The choice for marine environments, it won't rust or deteriorate from exposure to salt water. It offers better corrosion resistance than 316 stainless steel but isn't as strong.

	Includes	Wd.	Lg.	Specs. Met	Form		Each
Brass



	10	One 0.001" thick (±0.0001") sheet One 0.002" thick (±0.0002") sheet One 0.003" thick (±0.0003") sheet One 0.004" thick (±0.0004") sheet One 0.005" thick (±0.0005") sheet One 0.008" thick (±0.0008") sheet One 0.01" thick (±0.001") sheet One 0.013" thick (±0.0013") sheet One 0.015" thick (±0.0015") sheet One 0.02" thick (±0.002") sheet	8"	12"	ASTM B36	Sheet	000000	000000


	12	One 0.001" thick (±0.0001") sheet One 0.0015" thick (±0.00015") sheet One 0.002" thick (±0.0002") sheet One 0.003" thick (±0.0003") sheet One 0.004" thick (±0.0004") sheet One 0.005" thick (±0.0005") sheet One 0.006" thick (±0.0006") sheet One 0.007" thick (±0.0007") sheet One 0.008" thick (±0.0008") sheet One 0.01" thick (±0.001") sheet One 0.012" thick (±0.0012") sheet One 0.015" thick (±0.0015") sheet	6"	12"	ASTM B36	Sheet	0000000	00000
	20	Two 0.001" thick (±0.0001") sheets Two 0.002" thick (±0.0002") sheets Two 0.003" thick (±0.0003") sheets Two 0.004" thick (±0.0004") sheets Two 0.005" thick (±0.0005") sheets Two 0.008" thick (±0.0008") sheets Two 0.01" thick (±0.001") sheets Two 0.012" thick (±0.0012") sheets Two 0.015" thick (±0.0015") sheets Two 0.02" thick (±0.002") sheets	8"	12"	ASTM B36	Sheet	00000000	000000
	24	Two 0.001" thick (±0.0001") sheets Two 0.0015" thick (±0.00015") sheets Two 0.002" thick (±0.0002") sheets Two 0.003" thick (±0.0003") sheets Two 0.004" thick (±0.0004") sheets Two 0.005" thick (±0.0005") sheets Two 0.006" thick (±0.0006") sheets Two 0.007" thick (±0.0007") sheets Two 0.008" thick (±0.0008") sheets Two 0.01" thick (±0.001") sheets Two 0.012" thick (±0.0012") sheets Two 0.015" thick (±0.0015") sheets	6"	12"	ASTM B36	Sheet	00000000	000000


	Bronze



			8	One 0.005" thick (±0.0003") sheet One 0.008" thick (±0.0004") sheet One 0.01" thick (±0.0007") sheet One 0.013" thick (±0.001") sheet One 0.016" thick (±0.001") sheet One 0.02" thick (±0.001") sheet One 0.025" thick (±0.001") sheet One 0.032" thick (±0.0015") sheet	6"	12"	ASTM B103	Sheet	000000	000000

Shim Stock with Metal Cabinet

This shim stock comes in a spacious keyed-lock steel cabinet that can also be used to store your own tools and supplies.

Includes	Wd.	Lg.	Form		Each



59	18-8 Stainless Steel—Hardened: 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.01", 0.012", 0.015" 1010 Low-Carbon Steel—Hardened: 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.01", 0.012", 0.015" 1095 Spring Steel—Hardened: 0.005", 0.01", 0.015", 0.02", 0.025", 0.032" 1100 Aluminum—Hardened: 0.001", 0.002", 0.003", 0.005" 260 Brass—Hardened: 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.01", 0.012", 0.015" 510 Bronze—Spring-Tempered: 0.005", 0.008", 0.01", 0.013", 0.016", 0.02", 0.025", 0.032" 110 Copper—Softened: 0.005", 0.01", 0.015", 0.02", 0.025"	6"	12"	Sheet, Roll	0000000	0000000

Adhesive-Back Shim Stock

Stick with confidence—a durable adhesive keeps this shim stock from sliding out of place. Cut the shim stock into custom shapes to create shims that suit your needs. With thickness tolerances as fine as a strand of hair, the shims will precisely align, space, and level components on dies, presses, and machinery.

Brass—Picked for its warm, polished look. Similar to 18-8 stainless steel, it resists rusting in wet and outdoor areas.

Temper Rating—Choose half hard to create shims that you’ll need to bend or shape. Opt for full hard to make stronger shims that will maintain their shape under loads.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

							Certificate
	Thk.	Thk. Tolerance	Material Thk.	Adhesive Thk.	Adhesive Type	Temper Rating	Type	Form	Specs. Met	Form		Each
Brass







				8" Wide × 12" Long

				0.003"	-0.0001" to 0.0001"	0.001"	0.002"	Acrylic	1/2 Hard	Material Certificate	Digital	ASTM B36	Sheet	00000000	000000


				0.004"	-0.0002" to 0.0002"	0.002"	0.002"	Acrylic	1/2 Hard	Material Certificate	Digital	ASTM B36	Sheet	00000000	00000
				0.005"	-0.0003" to 0.0003"	0.003"	0.002"	Acrylic	1/2 Hard	Material Certificate	Digital	ASTM B36	Sheet	00000000	00000
				0.006"	-0.0004" to 0.0004"	0.004"	0.002"	Acrylic	1/2 Hard	Material Certificate	Digital	ASTM B36	Sheet	00000000	00000
				0.007"	-0.0005" to 0.0005"	0.005"	0.002"	Acrylic	1/2 Hard	Material Certificate	Digital	ASTM B36	Sheet	00000000	00000
				0.008"	-0.0006" to 0.0006"	0.006"	0.002"	Acrylic	1/2 Hard	Material Certificate	Digital	ASTM B36	Sheet	0000000	00000
				0.01"	-0.0008" to 0.0008"	0.008"	0.002"	Acrylic	1/2 Hard	Material Certificate	Digital	ASTM B36	Sheet	00000000	00000
				0.012"	-0.001" to 0.001"	0.01"	0.002"	Acrylic	1/2 Hard	Material Certificate	Digital	ASTM B36	Sheet	00000000	00000
				0.014"	-0.0012" to 0.0012"	0.012"	0.002"	Acrylic	1/2 Hard	Material Certificate	Digital	ASTM B36	Sheet	00000000	00000
				0.017"	-0.0015" to 0.0015"	0.015"	0.002"	Acrylic	1/2 Hard	Material Certificate	Digital	ASTM B36	Sheet	00000000	00000
				0.022"	-0.002" to 0.002"	0.02"	0.002"	Acrylic	1/2 Hard	Material Certificate	Digital	ASTM B36	Sheet	00000000	00000


				0.027"	-0.0025" to 0.0025"	0.025"	0.002"	Acrylic	1/2 Hard	Material Certificate	Digital	ASTM B36	Sheet	00000000	00000
				0.033"	-0.003" to 0.003"	0.031"	0.002"	Acrylic	1/2 Hard	Material Certificate	Digital	ASTM B36	Sheet	00000000	00000

Peel-Away Multilayer Shim Stock

Image of ProductInUse. Front orientation. Shim Stock. Peel Away, Sold Individually, Multilayer.

Fine-tune thickness without worrying about stacking multiple shims. Cut the shim stock into custom shapes that suit your needs. It's made of layers of material bonded with adhesive—peel off the layers with a utility knife until you reach your desired thickness. To make peeling easier, warm the created shims to soften the adhesive. With thickness tolerances as fine as a strand of hair, the shims will precisely align, space, and level components on dies, presses, and machinery.

Brass—Picked for its warm, polished look. Similar to 18-8 stainless steel, it resists rusting in wet and outdoor areas.

Temper Rating—Choose half hard to create shims that you’ll need to bend or shape. Opt for full hard to make stronger shims that will maintain their shape under loads.

	Layer Thk.	Temper Rating	Specs. Met	Form		Each
Brass







	8" Wide × 24" Long

	0.006"	-0.0005" to 0.001"	3	0.002"	1/2 Hard	SAE AMS-DTL-22499	Sheet	0000000	000000


	0.008"	-0.0005" to 0.001"	4	0.002"	1/2 Hard	SAE AMS-DTL-22499	Sheet	0000000	00000
	0.01"	-0.0005" to 0.0015"	5	0.002"	1/2 Hard	SAE AMS-DTL-22499	Sheet	0000000	00000
	0.016"	-0.001" to 0.0015"	8	0.002"	1/2 Hard	SAE AMS-DTL-22499	Sheet	0000000	00000
	0.02"	-0.001" to 0.002"	10	0.002"	1/2 Hard	SAE AMS-DTL-22499	Sheet	0000000	00000
	0.032"	-0.002" to 0.003"	16	0.002"	1/2 Hard	SAE AMS-DTL-22499	Sheet	0000000	00000
	0.048"	-0.002" to 0.005"	24	0.002"	1/2 Hard	SAE AMS-DTL-22499	Sheet	0000000	000000
	0.062"	-0.002" to 0.006"	31	0.002"	1/2 Hard	SAE AMS-DTL-22499	Sheet	0000000	000000
	0.094"	-0.003" to 0.009"	47	0.002"	1/2 Hard	SAE AMS-DTL-22499	Sheet	0000000	000000
	0.124"	-0.003" to 0.012"	62	0.002"	1/2 Hard	SAE AMS-DTL-22499	Sheet	0000000	000000




			12" Wide × 12" Long

			0.02"	-0.001" to 0.002"	10	0.002"	1/2 Hard	SAE AMS-DTL-22499	Sheet	00000000	00000


			0.032"	-0.002" to 0.003"	16	0.002"	1/2 Hard	SAE AMS-DTL-22499	Sheet	0000000	00000
			0.048"	-0.002" to 0.005"	24	0.002"	1/2 Hard	SAE AMS-DTL-22499	Sheet	0000000	000000
			0.062"	-0.002" to 0.006"	31	0.002"	1/2 Hard	SAE AMS-DTL-22499	Sheet	0000000	000000
			0.094"	-0.003" to 0.009"	47	0.002"	1/2 Hard	SAE AMS-DTL-22499	Sheet	0000000	000000
			0.124"	-0.003" to 0.012"	62	0.002"	1/2 Hard	SAE AMS-DTL-22499	Sheet	0000000	000000

Made-to-Order Shims

Image of Product. Front orientation. Shims. Sold Individually, Made-to-Order.

If you need a unique shim shape or size, we’ll precision cut it for you. With thickness tolerances as fine as a strand of hair, these shims precisely align, space, and level components on shafts, arbors, and machinery.

Send your dimensioned DWG, DXF, IGES, or STEP file to sales@mcmaster.com. Please leave at least _1/8" wall between shim edge and holes. Minimum hole size is _1/8". Shims should be no smaller than 1" × 1" square or 1" OD. Maximum shim dimension is the largest overall length, width, or diameter of your custom shim.

Brass—With a warm, polished look, these shims are often chosen for their appearance. Similar to 18-8 stainless steel, brass is corrosion resistant enough to stand up to wet environments.

Material Certificate—Shims include a report with a traceable lot number.

						2" × 2" Maximum Shim Size			5" × 5" Maximum Shim Size			7" × 7" Maximum Shim Size			11" × 11" Maximum Shim Size			23" × 23" Maximum Shim Size
	Thk.	Thk. Tolerance	Min. Hardness	Certificate Type	Specs. Met	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.
Brass



		0.001"	-0.00005" to 0.00005"	Rockwell B60	Material Certificate	ASTM B36, Fed. Spec. QQ-B-613	16	000000000	000000	4	000000000	000000	—	———	0	—	———	0	—	———	0


		0.002"	-0.0001" to 0.0001"	Rockwell B60	Material Certificate	ASTM B36, Fed. Spec. QQ-B-613	16	000000000	00000	4	000000000	00000	9	000000000	0000000	4	000000000	0000000	1	000000000	0000000
		0.003"	-0.00015" to 0.00015"	Rockwell B60	Material Certificate	ASTM B36, Fed. Spec. QQ-B-613	16	000000000	00000	4	000000000	00000	9	000000000	000000	4	000000000	000000	1	000000000	000000
		0.004"	-0.0002" to 0.0002"	Rockwell B60	Material Certificate	ASTM B36, Fed. Spec. QQ-B-613	16	000000000	00000	4	000000000	00000	—	———	0	—	———	0	—	———	0
		0.005"	-0.00025" to 0.00025"	Rockwell B60	Material Certificate	ASTM B36, Fed. Spec. QQ-B-613	16	000000000	00000	4	000000000	00000	9	000000000	000000	4	000000000	000000	1	000000000	000000
		0.01"	-0.0005" to 0.0005"	Rockwell B60	Material Certificate	ASTM B36, Fed. Spec. QQ-B-613	16	000000000	00000	4	000000000	00000	9	000000000	000000	4	000000000	000000	1	000000000	000000
		0.02"	-0.001" to 0.001"	Rockwell B60	Material Certificate	ASTM B36, Fed. Spec. QQ-B-613	16	000000000	00000	4	000000000	00000	9	000000000	000000	4	000000000	000000	1	000000000	000000
		0.025"	-0.00125" to 0.00125"	Rockwell B60	Material Certificate	ASTM B36, Fed. Spec. QQ-B-613	16	000000000	00000	4	000000000	00000	9	000000000	000000	4	000000000	000000	1	000000000	000000
		0.031"	-0.00155" to 0.00155"	Rockwell B60	Material Certificate	ASTM B36, Fed. Spec. QQ-B-613	16	000000000	00000	4	000000000	00000	9	000000000	000000	4	000000000	000000	1	000000000	000000

Peel-Away Multilayer Made-to-Order Shims

Image of Product. Front orientation. Shims. Multilayer, Sold Individually, Made-to-Order, Peel Away.

If you need a unique peel-away shim shape or size, we’ll precision cut it for you. Use these shims to fine-tune thickness without worrying about stacking multiple shims. They're made of metal layers bonded with adhesive—peel off the layers with a utility knife until you reach your desired thickness. To make peeling easier, warm the shims to soften the adhesive. With thickness tolerances as fine as a strand of hair, all of these shims precisely align, space, and level components on shafts, arbors, and machinery.

Send your dimensioned DWG, DXF, IGES, or STEP file to sales@mcmaster.com. Please leave at least _1/8" wall between shim edge and holes. Minimum hole size is _1/4". Shims should be no smaller than 1" × 1" square or 1" OD. Maximum shim dimension is the largest overall length, width, or diameter of your custom shim.

Brass—With a warm, polished look, these shims are often chosen for their appearance. Similar to 18-8 stainless steel, brass is corrosion resistant enough to stand up to wet environments.

Material Certificate—Shims include a report with a traceable lot number.

								2" × 2" Maximum Shim Size			5" × 5" Maximum Shim Size			7" × 7" Maximum Shim Size			11" × 11" Maximum Shim Size			23" × 23" Maximum Shim Size
	Thk.	Thk. Tolerance	No. of Layers	Layer Thk.	Min. Hardness	Certificate Type	Specs. Met	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.
Brass



		0.008"	-0.0004" to 0.0004"	4	0.002"	Not Rated	Material Certificate	ASTM B36	16	000000000	0000000	4	000000000	0000000	9	000000000	0000000	4	000000000	0000000	1	000000000	0000000


		0.016"	-0.0008" to 0.0008"	8	0.002"	Not Rated	Material Certificate	ASTM B36	16	000000000	000000	4	000000000	000000	9	000000000	000000	4	000000000	000000	1	000000000	000000
		0.032"	-0.0016" to 0.0016"	16	0.002"	Not Rated	Material Certificate	ASTM B36	16	000000000	000000	4	000000000	000000	9	000000000	000000	4	000000000	000000	1	000000000	000000
		0.048"	-0.0024" to 0.0024"	24	0.002"	Not Rated	Material Certificate	ASTM B36	16	000000000	000000	4	000000000	000000	9	000000000	000000	4	000000000	000000	1	000000000	000000
		0.062"	-0.0031" to 0.0031"	32	0.002"	Not Rated	Material Certificate	ASTM B36	16	000000000	000000	4	000000000	000000	9	000000000	000000	4	000000000	000000	1	000000000	000000
		0.124"	-0.0062" to 0.0062"	62	0.002"	Not Rated	Material Certificate	ASTM B36	16	000000000	000000	4	000000000	000000	9	000000000	00000000	4	000000000	00000000	1	000000000	00000000