About Copper, Brass, and Bronze
More
Ultra-Machinable 360 Brass Rods and Discs
- Yield Strength:
Inch sizes: 15,000 psi
Metric sizes: 23,000 psi - Hardness: See table
- Temper:
Inch sizes: H02 (1/2 Hard)
Metric sizes: 1/2 Hard - Heat Treatable: No
- Specifications Met:
Inch sizes: ASTM B16
Metric sizes: European Standard EN 12164
With the highest lead content of all the brass alloys, 360 offers the best machinability. Often called free-machining and free-cutting brass, it stands up to high-speed drilling, milling, and tapping operations with minimal wear on your tools. It’s commonly used for gears, pinions, and lock components.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Dia. | Dia. Tolerance Range | Hardness | 1/2 ft. Lg. | 1 ft. Lg. | 2 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
| 3/32" | -0.003" to 0.003" | Not Rated | 00000000 | |||||
| 1/8" | -0.003" to 0.003" | Not Rated | 00000000 | |||||
| 5/32" | -0.003" to 0.003" | Not Rated | 00000000 | |||||
| 3/16" | -0.003" to 0.003" | Not Rated | 00000000 | |||||
| 7/32" | -0.003" to 0.003" | Not Rated | 00000000 | |||||
| 1/4" | -0.003" to 0.003" | Not Rated | 00000000 | |||||
| 9/32" | -0.003" to 0.003" | Not Rated | 00000000 | |||||
| 5/16" | -0.003" to 0.003" | Not Rated | 00000000 | |||||
| 11/32" | -0.003" to 0.003" | Not Rated | 00000000 | |||||
| 3/8" | -0.003" to 0.003" | Not Rated | 00000000 | |||||
| 13/32" | -0.003" to 0.003" | Not Rated | 00000000 | |||||
| 7/16" | -0.003" to 0.003" | Not Rated | 00000000 | |||||
| 15/32" | -0.003" to 0.003" | Not Rated | 00000000 | |||||
| 1/2" | -0.003" to 0.003" | Rockwell B25 (Soft) | 00000000 | |||||
| 17/32" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 9/16" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 19/32" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 5/8" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 21/32" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 11/16" | -0.003" to 0.003" | Rockwell B25 (Soft) | 000000 | |||||
| 23/32" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 3/4" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 25/32" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 13/16" | -0.003" to 0.003" | Rockwell B25 (Soft) | 000000 | |||||
| 7/8" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 15/16" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 1" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 1 1/16" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 1 1/8" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 1 3/16" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 1 1/4" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 1 5/16" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 1 3/8" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 1 7/16" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 1 1/2" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 1 9/16" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 1 5/8" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 1 3/4" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 1 7/8" | -0.003" to 0.003" | Rockwell B25 (Soft) | 000000 | |||||
| 2" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 2 1/16" | -0.003" to 0.003" | Rockwell B25 (Soft) | 000000 | |||||
| 2 1/8" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 2 1/4" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 2 3/8" | -0.006" to 0.006" | Rockwell B25 (Soft) | 0000000 | |||||
| 2 1/2" | -0.006" to 0.006" | Rockwell B25 (Soft) | 0000000 | |||||
| 2 5/8" | -0.006" to 0.006" | Rockwell B25 (Soft) | 0000000 | |||||
| 2 3/4" | -0.006" to 0.006" | Rockwell B25 (Soft) | 0000000 | |||||
| 3" | -0.006" to 0.006" | Rockwell B25 (Soft) | 00000000 | |||||
| 3 1/8" | -0.006" to 0.006" | Rockwell B25 (Soft) | 00000000 | |||||
| 3 1/4" | -0.006" to 0.006" | Rockwell B25 (Soft) | 00000000 | |||||
| 3 3/8" | -0.006" to 0.006" | Rockwell B25 (Soft) | 00000000 | |||||
| 3 1/2" | -0.006" to 0.006" | Rockwell B25 (Soft) | 00000000 | |||||
| 3 3/4" | -0.006" to 0.006" | Rockwell B25 (Soft) | 00000000 | |||||
| 4" | -0.006" to 0.006" | Rockwell B25 (Soft) | 00000000 | |||||
| 4 1/4" | -0.12" to 0.12" | Rockwell B25 (Soft) | 00000000 | |||||
| 4 1/2" | -0.12" to 0.12" | Rockwell B25 (Soft) | 00000000 | |||||
| 5" | -0.12" to 0.12" | Rockwell B25 (Soft) | 00000000 | |||||
| 6" | -0.12" to 0.12" | Rockwell B25 (Soft) | 00000000 |
| Dia. | Dia. Tolerance Range | Hardness | 1/2" Lg. | 1" Lg. | 2" Lg. | 3" Lg. | |
| 1" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | ||||
| 1 1/2" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | ||||
| 2" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | ||||
| 2 1/2" | -0.006" to 0.006" | Rockwell B25 (Soft) | 0000000 | ||||
| 3" | -0.006" to 0.006" | Rockwell B25 (Soft) | 0000000 | ||||
| 4" | -0.006" to 0.006" | Rockwell B25 (Soft) | 0000000 | ||||
| 5" | -0.12" to 0.12" | Rockwell B25 (Soft) | 0000000 | ||||
| 6" | -0.12" to 0.12" | Rockwell B25 (Soft) | 0000000 |
1 m Lg. | ||||
|---|---|---|---|---|
| Dia., mm | Dia. Tolerance Range, mm | Hardness | Each | |
| 2 | -0.05 to 0.05 | Rockwell B75 (Medium) | 0000000 | 00000 |
| 3 | -0.05 to 0.05 | Rockwell B75 (Medium) | 0000000 | 0000 |
| 4 | -0.05 to 0.05 | Rockwell B75 (Medium) | 0000000 | 00000 |
| 5 | -0.05 to 0.05 | Rockwell B75 (Medium) | 0000000 | 00000 |
| 6 | -0.08 to 0.08 | Rockwell B75 (Medium) | 0000000 | 00000 |
| 7 | -0.08 to 0.08 | Rockwell B75 (Medium) | 0000000 | 00000 |
| 8 | -0.08 to 0.08 | Rockwell B75 (Medium) | 0000000 | 00000 |
| 9 | -0.08 to 0.08 | Rockwell B75 (Medium) | 0000000 | 00000 |
| 10 | -0.08 to 0.08 | Rockwell B75 (Medium) | 0000000 | 00000 |
| 12 | -0.08 to 0.08 | Rockwell B75 (Medium) | 0000000 | 00000 |
| 14 | -0.08 to 0.08 | Rockwell B75 (Medium) | 0000000 | 00000 |
| 15 | -0.08 to 0.08 | Rockwell B75 (Medium) | 0000000 | 00000 |
| 16 | -0.08 to 0.08 | Rockwell B75 (Medium) | 0000000 | 000000 |
| 18 | -0.08 to 0.08 | Rockwell B75 (Medium) | 0000000 | 000000 |
| 20 | -0.08 to 0.08 | Rockwell B75 (Medium) | 0000000 | 000000 |
| 25 | -0.08 to 0.08 | Rockwell B75 (Medium) | 0000000 | 000000 |
Tight-Tolerance Ultra-Machinable 360 Brass Rods
- Yield Strength: 25,000 psi
- Hardness: Not Rated
- Temper: H02 (1/2 Hard)
- Heat Treatable: No
- Specifications Met: ASTM B16
The diameter of these rods is held to a ±0.0002" tolerance. With the highest lead content of all the brass alloys, 360 offers the best machinability. Often called free-machining and free-cutting brass, it stands up to high-speed drilling, milling, and tapping operations with minimal wear on your tools. It’s commonly used for gears, pinions, and lock components.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Dia. | Dia. Tolerance Range | Mechanical Finish | Straightness Tolerance | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
| 1/8" | -0.0002" to 0.0002" | Precision Ground | 1/16" per 5 ft. | 000000 | |||
| 3/16" | -0.0002" to 0.0002" | Precision Ground | 1/16" per 5 ft. | 000000 | |||
| 1/4" | -0.0002" to 0.0002" | Precision Ground | 1/16" per 5 ft. | 000000 | |||
| 5/16" | -0.0002" to 0.0002" | Precision Ground | 1/16" per 5 ft. | 000000 | |||
| 3/8" | -0.0002" to 0.0002" | Precision Ground | 1/16" per 5 ft. | 000000 | |||
| 1/2" | -0.0002" to 0.0002" | Precision Ground | 1/16" per 5 ft. | 000000 | |||
| 5/8" | -0.0002" to 0.0002" | Precision Ground | 1/16" per 5 ft. | 000000 | |||
| 3/4" | -0.0002" to 0.0002" | Precision Ground | 1/16" per 5 ft. | 000000 | |||
| 7/8" | -0.0002" to 0.0002" | Precision Ground | 1/16" per 5 ft. | 000000 | |||
| 1" | -0.0002" to 0.0002" | Precision Ground | 1/16" per 5 ft. | 0000000 |
Ultra-Machinable 360 Brass Bars
- Yield Strength: 15,000 psi
- Hardness: Rockwell B35 (Soft)
- Temper: H02 (1/2 Hard)
- Heat Treatable: No
- Specifications Met: ASTM B16
With the highest lead content of all the brass alloys, 360 offers the best machinability. Often called free-machining and free-cutting brass, it stands up to high-speed drilling, milling, and tapping operations with minimal wear on your tools. It’s commonly used for gears, pinions, and lock components.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Wd. | 1/2 ft. Lg. | 1 ft. Lg. | 2 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
1/8" Thick. (-0.009" to 0.009" Tolerance) | ||||||
|---|---|---|---|---|---|---|
| 1/8" | 0000000 | |||||
| 1/4" | 0000000 | |||||
| 3/8" | 0000000 | |||||
| 1/2" | 0000000 | |||||
| 5/8" | 000000 | |||||
| 3/4" | 000000 | |||||
| 1" | 0000000 | |||||
| 1 1/4" | 00000000 | |||||
| 1 1/2" | 00000000 | |||||
| 1 3/4" | 0000000 | |||||
| 2" | 00000000 | |||||
| 2 1/2" | 00000000 | |||||
| 3" | 00000000 | |||||
| 4" | 00000000 | |||||
5/32" Thick. (-0.009" to 0.009" Tolerance) | ||||||
| 5/32" | 0000000 | |||||
3/16" Thick. (-0.009" to 0.009" Tolerance) | ||||||
| 3/16" | 0000000 | |||||
| 1/4" | 000000 | |||||
| 3/8" | 000000 | |||||
| 1/2" | 000000 | |||||
| 5/8" | 000000 | |||||
| 3/4" | 00000000 | |||||
| 7/8" | 0000000 | |||||
| 1" | 00000000 | |||||
| 1 1/4" | 00000000 | |||||
| 1 1/2" | 00000000 | |||||
| 2" | 00000000 | |||||
| 2 1/2" | 00000000 | |||||
| 3" | 00000000 | |||||
| 4" | 00000000 | |||||
1/4" Thick. (-0.009" to 0.009" Tolerance) | ||||||
| 1/4" | 0000000 | |||||
| 5/16" | 000000 | |||||
| 3/8" | 00000000 | |||||
| 1/2" | 00000000 | |||||
| 5/8" | 00000000 | |||||
| 3/4" | 00000000 | |||||
| 1" | 00000000 | |||||
| 1 1/4" | 00000000 | |||||
| 1 1/2" | 00000000 | |||||
| 1 3/4" | 0000000 | |||||
| 2" | 00000000 | |||||
| 2 1/4" | 0000000 | |||||
| 2 1/2" | 00000000 | |||||
| 3" | 00000000 | |||||
| 4" | 00000000 | |||||
5/16" Thick. (-0.009" to 0.009" Tolerance) | ||||||
| 5/16" | 0000000 | |||||
| 3/8" | 0000000 | |||||
| 1/2" | 00000000 | |||||
| 5/8" | 00000000 | |||||
| 1" | 00000000 | |||||
| 1 1/2" | 00000000 | |||||
| 2" | 00000000 | |||||
3/8" Thick. (-0.009" to 0.009" Tolerance) | ||||||
| 3/8" | 0000000 | |||||
| 1/2" | 00000000 | |||||
| 5/8" | 00000000 | |||||
| 3/4" | 00000000 | |||||
| 7/8" | 0000000 | |||||
| 1" | 00000000 | |||||
| 1 1/4" | 00000000 | |||||
| 1 1/2" | 00000000 | |||||
| 1 3/4" | 0000000 | |||||
| 2" | 00000000 | |||||
| 2 1/2" | 00000000 | |||||
| 3" | 00000000 | |||||
| 4" | 00000000 | |||||
| 6" | 0000000 | |||||
7/16" Thick. (-0.009" to 0.009" Tolerance) | ||||||
| 7/16" | 0000000 | |||||
1/2" Thick. (-0.009" to 0.009" Tolerance) | ||||||
| 1/2" | 0000000 | |||||
| 5/8" | 00000000 | |||||
| 3/4" | 00000000 | |||||
| 7/8" | 000000 | |||||
| 1" | 00000000 | |||||
| 1 1/4" | 00000000 | |||||
| 1 1/2" | 00000000 | |||||
| 1 3/4" | 0000000 | |||||
| 2" | 00000000 | |||||
| 2 1/2" | 00000000 | |||||
| 3" | 00000000 | |||||
| 3 1/2" | 0000000 | |||||
| 4" | 00000000 | |||||
| 6" | 0000000 | |||||
9/16" Thick. (-0.009" to 0.009" Tolerance) | ||||||
| 9/16" | 0000000 | |||||
5/8" Thick. (-0.009" to 0.009" Tolerance) | ||||||
| 5/8" | 0000000 | |||||
| 3/4" | 00000000 | |||||
| 7/8" | 00000000 | |||||
| 1" | 00000000 | |||||
| 1 1/4" | 00000000 | |||||
| 1 1/2" | 00000000 | |||||
| 1 3/4" | 00000000 | |||||
| 2" | 00000000 | |||||
| 2 1/2" | 00000000 | |||||
| 3" | 00000000 | |||||
| 4" | 00000000 | |||||
3/4" Thick. (-0.009" to 0.009" Tolerance) | ||||||
| 3/4" | 0000000 | |||||
| 7/8" | 00000000 | |||||
| 1" | 00000000 | |||||
| 1 1/4" | 0000000 | |||||
| 1 1/2" | 00000000 | |||||
| 1 3/4" | 00000000 | |||||
| 2" | 00000000 | |||||
| 2 1/2" | 00000000 | |||||
| 3" | 00000000 | |||||
| 4" | 00000000 | |||||
7/8" Thick. (-0.009" to 0.009" Tolerance) | ||||||
| 1 1/2" | 00000000 | |||||
1" Thick. (-0.014" to 0.014" Tolerance) | ||||||
| 1" | 0000000 | |||||
| 1 1/4" | 00000000 | |||||
| 1 1/2" | 00000000 | |||||
| 1 3/4" | 00000000 | |||||
| 2" | 00000000 | |||||
| 2 1/2" | 00000000 | |||||
| 3" | 00000000 | |||||
| 3 1/2" | 00000000 | |||||
| 4" | 00000000 | |||||
| 5" | 00000000 | |||||
| 6" | 00000000 | |||||
1 1/4" Thick. (-0.014" to 0.014" Tolerance) | ||||||
| 1 1/4" | 0000000 | |||||
| 1 1/2" | 00000000 | |||||
| 1 3/4" | 00000000 | |||||
| 2" | 00000000 | |||||
| 2 1/2" | 00000000 | |||||
| 3" | 00000000 | |||||
| 4" | 00000000 | |||||
1 3/8" Thick. (-0.014" to 0.014" Tolerance) | ||||||
| 1 3/4" | 00000000 | |||||
1 1/2" Thick. (-0.014" to 0.014" Tolerance) | ||||||
| 1 1/2" | 0000000 | |||||
| 2" | 00000000 | |||||
| 2 1/2" | 0000000 | |||||
| 3" | 00000000 | |||||
| 4" | 00000000 | |||||
1 3/4" Thick. (-0.014" to 0.014" Tolerance) | ||||||
| 1 3/4" | 0000000 | |||||
| 2" | 00000000 | |||||
| 2 1/2" | 00000000 | |||||
| 3" | 00000000 | |||||
2" Thick. (-0.014" to 0.014" Tolerance) | ||||||
| 2" | 0000000 | |||||
| 2 1/2" | 00000000 | |||||
| 3" | 00000000 | |||||
| 4" | 00000000 | |||||
2 1/4" Thick. (-0.014" to 0.014" Tolerance) | ||||||
| 2 1/4" | 0000000 | |||||
2 1/2" Thick. (-0.014" to 0.014" Tolerance) | ||||||
| 2 1/2" | 0000000 | |||||
| 3 1/2" | 00000000 | |||||
3" Thick. (-0.014" to 0.014" Tolerance) | ||||||
| 3" | 0000000 | |||||
Ultra-Machinable 360 Brass Hex Bars
- Yield Strength:
Inch sizes: 25,000 psi
Metric size: 23,000 psi - Hardness:
Inch sizes: Rockwell B55-B80 (Medium)
Metric sizes: Rockwell B75 (Medium) - Temper:
Inch sizes: H02 (1/2 Hard)
Metric sizes: 1/2 Hard - Heat Treatable: No
- Specifications Met:
Inch sizes: ASTM B16
Metric sizes: European Standard EN 12164
With the highest lead content of all the brass alloys, 360 offers the best machinability. Often called free-machining and free-cutting brass, it stands up to high-speed drilling, milling, and tapping operations with minimal wear on your tools. It’s commonly used for gears, pinions, and lock components.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Wd. | Wd. Tolerance | 1/2 ft. Lg. | 1 ft. Lg. | 2 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
| 1/8" | -0.006" to 0.006" | 0000000 | |||||
| 3/16" | -0.006" to 0.006" | 0000000 | |||||
| 1/4" | -0.006" to 0.006" | 0000000 | |||||
| 5/16" | -0.006" to 0.006" | 0000000 | |||||
| 3/8" | -0.006" to 0.006" | 0000000 | |||||
| 7/16" | -0.006" to 0.006" | 0000000 | |||||
| 1/2" | -0.006" to 0.006" | 0000000 | |||||
| 9/16" | -0.006" to 0.006" | 0000000 | |||||
| 5/8" | -0.006" to 0.006" | 0000000 | |||||
| 11/16" | -0.006" to 0.006" | 0000000 | |||||
| 3/4" | -0.006" to 0.006" | 0000000 | |||||
| 13/16" | -0.006" to 0.006" | 0000000 | |||||
| 7/8" | -0.006" to 0.006" | 0000000 | |||||
| 15/16" | -0.006" to 0.006" | 0000000 | |||||
| 1" | -0.006" to 0.006" | 0000000 | |||||
| 1 1/8" | -0.006" to 0.006" | 0000000 | |||||
| 1 1/4" | -0.006" to 0.006" | 0000000 | |||||
| 1 3/8" | -0.009" to 0.009" | 0000000 | |||||
| 1 1/2" | -0.009" to 0.009" | 0000000 | |||||
| 1 5/8" | -0.009" to 0.009" | 0000000 | |||||
| 1 3/4" | -0.009" to 0.009" | 0000000 | |||||
| 2" | -0.009" to 0.009" | 0000000 | |||||
| 2 1/4" | -0.009" to 0.009" | 0000000 | |||||
| 2 1/2" | -0.009" to 0.009" | 0000000 |
1 m Lg. | |||
|---|---|---|---|
| Wd., mm | Wd. Tolerance, mm | Each | |
| 4 | -0.09 to 0.09 | 0000000 | 000000 |
| 5 | -0.09 to 0.09 | 0000000 | 00000 |
| 6 | -0.09 to 0.09 | 0000000 | 00000 |
| 7 | -0.09 to 0.09 | 0000000 | 00000 |
| 8 | -0.09 to 0.09 | 0000000 | 00000 |
| 10 | -0.11 to 0.11 | 0000000 | 00000 |
| 12 | -0.11 to 0.11 | 0000000 | 00000 |
| 14 | -0.11 to 0.11 | 0000000 | 000000 |
| 17 | -0.11 to 0.11 | 0000000 | 000000 |
| 19 | -0.13 to 0.13 | 0000000 | 000000 |
| 22 | -0.13 to 0.13 | 0000000 | 000000 |
| 24 | -0.13 to 0.13 | 0000000 | 000000 |
Machine Key Stock
Cut this square or rectangular key stock to length to create a straight machine key. Straight keys are the most common type of key. Machine keys are often the same material as the shaft and other components with which they are used. To use a key as a sacrificial part, choose a softer key that will shear off when parts are exposed to excessive force, preventing damage to expensive equipment.
Brass key stock is corrosion resistant and nonmagnetic. Brass is softer than other metals, so it's often used for shear keys.
Slightly smaller than the size listed in the table, undersized stock is the choice when you need a slightly looser fit or when you have an inconsistent keyway. Use it when parts need to be taken apart frequently, such as for maintenance or prototyping.
Key stock that meets DIN 6880 conforms to DIN standards for undersized keys.
For technical drawings and 3-D models, click on a part number.
Tolerance | |||||||
|---|---|---|---|---|---|---|---|
| Ht. × Wd. | Tolerance Rating | Ht. | Wd. | Minimum Hardness | Specifications Met | Each | |
12" Lg. | |||||||
| 1/8" × 1/8" | Standard | -0.003" to 0.003" | -0.003" to 0.003" | Rockwell B35 | __ | 000000000 | 00000 |
| 5/32" × 5/32" | Standard | -0.004" to 0.004" | -0.004" to 0.004" | Rockwell B35 | __ | 000000000 | 0000 |
| 3/16" × 3/16" | Standard | -0.003" to 0.003" | -0.003" to 0.003" | Rockwell B35 | __ | 000000000 | 0000 |
| 1/4" × 1/4" | Standard | -0.004" to 0.004" | -0.004" to 0.004" | Rockwell B35 | __ | 000000000 | 0000 |
| 5/16" × 5/16" | Standard | -0.003" to 0.003" | -0.003" to 0.003" | Rockwell B35 | __ | 000000000 | 0000 |
| 3/8" × 3/8" | Standard | -0.003" to 0.003" | -0.003" to 0.003" | Rockwell B35 | __ | 000000000 | 00000 |
| 7/16" × 7/16" | Standard | -0.003" to 0.003" | -0.003" to 0.003" | Rockwell B35 | __ | 000000000 | 00000 |
| 1/2" × 1/2" | Standard | -0.003" to 0.003" | -0.003" to 0.003" | Rockwell B35 | __ | 000000000 | 00000 |
| 5/8" × 5/8" | Standard | -0.004" to 0.004" | -0.004" to 0.004" | Rockwell B35 | __ | 000000000 | 00000 |
| 3/4" × 3/4" | Standard | -0.004" to 0.004" | -0.004" to 0.004" | Rockwell B35 | __ | 000000000 | 00000 |
| 7/8" × 7/8" | Standard | -0.005" to 0.005" | -0.005" to 0.005" | Rockwell B35 | __ | 000000000 | 00000 |
| 1" × 1" | Standard | -0.004" to 0.004" | -0.004" to 0.004" | Rockwell B35 | __ | 000000000 | 00000 |
| 1 1/4" × 1 1/4" | Standard | -0.005" to 0.005" | -0.005" to 0.005" | Rockwell B35 | __ | 000000000 | 000000 |
36" Lg. | |||||||
| 1/8" × 1/8" | Standard | -0.004" to 0.004" | -0.004" to 0.004" | Rockwell B35 | __ | 000000000 | 0000 |
| 3/16" × 3/16" | Standard | -0.004" to 0.004" | -0.004" to 0.004" | Rockwell B35 | __ | 000000000 | 00000 |
| 1/4" × 1/4" | Standard | -0.004" to 0.004" | -0.004" to 0.004" | Rockwell B35 | __ | 000000000 | 00000 |
| 5/16" × 5/16" | Standard | -0.004" to 0.004" | -0.004" to 0.004" | Rockwell B35 | __ | 000000000 | 00000 |
| 3/8" × 3/8" | Standard | -0.004" to 0.004" | -0.004" to 0.004" | Rockwell B35 | __ | 000000000 | 00000 |
| 1/2" × 1/2" | Standard | -0.004" to 0.004" | -0.004" to 0.004" | Rockwell B35 | __ | 000000000 | 00000 |
305mm Lg. | |||||||
| 3mm × 3mm | Undersized | -0.030mm to 0.000mm | -0.030mm to 0.000mm | Rockwell B35 | DIN 6880 | 000000000 | 00000 |
| 4mm × 4mm | Undersized | -0.030mm to 0.000mm | -0.030mm to 0.000mm | Rockwell B35 | DIN 6880 | 000000000 | 00000 |
| 5mm × 5mm | Undersized | -0.030mm to 0.000mm | -0.030mm to 0.000mm | Rockwell B35 | DIN 6880 | 000000000 | 00000 |
| 6mm × 6mm | Undersized | -0.030mm to 0.000mm | -0.030mm to 0.000mm | Rockwell B35 | DIN 6880 | 000000000 | 00000 |
| 8mm × 8mm | Undersized | -0.036mm to 0.000mm | -0.036mm to 0.000mm | Rockwell B35 | DIN 6880 | 000000000 | 00000 |