We will reply to your message within an hour.
Also known as supplemental protectors, these circuit breakers mount directly to DIN rail downstream from a branch circuit breaker to protect a single piece of equipment.
Mount these circuit breakers directly to DIN rail to protect equipment and wiring in an area of your facility from overloads and short circuits.
Match these circuit breakers to Square D breaker boxes or panel boards of the same manufacturer series.
Use with Siemens EQ series breaker boxes.
Install these circuit breakers into Cutler-Hammer CH series breaker boxes.
Mount these breakers, also known as supplemental protectors, through panels downstream from a branch circuit breaker to protect a single piece of equipment.
Unlike breakers that trip thermally, these breakers have a hydraulic-magnetic trip mechanism, so they aren’t affected by changes in temperature.
Small enough to fit in tight spaces, these circuit breakers mount through panels and are UL 489-rated for branch circuit protection.
Protect against overload and short circuits in low-voltage automotive and other electronic applications.
Replace any Edison-base fuse with these resettable circuit breakers.
A powerful blast makes these tools good for heavy pavement-breaking and asphalt-cutting jobs.
Break through concrete walls and floors.
Often used in offices and workstations, these outlet strips power multiple devices from a single wall outlet.
The power switch to these outlet strips is on an extension cord, so you can control power even when the strips are in hard to reach places, such as under a desk.
Save energy by automatically turning off unused outlets—the master outlet controls the follower outlets and shuts off power to those outlets when a device plugged into the master is turned off.
Separately control each device plugged into these strips—each outlet has its own power switch.
Keep personnel safe from electric shock with ground fault protection.
Filters between the outlets on these strips protect computers and other sensitive equipment from external signals that interfere with the equipment’s performance.
Also known as hospital-grade outlet strips, these outlets have an extra-tight fit to prevent plugs from detaching. They are marked with a green dot.
Turn a single outlet into five outlets with ground fault protection to minimize the risk of electric shock.
No need for mounting hardware—these outlet strips have magnets on the back to stick to steel walls, cabinets, and other magnetic surfaces.
Mount these strips into standard 19" wide electronics racks and enclosures.
Install these extra-long strips onto the frame of an electrical cabinet.
Hardwire one of these converters to an extension cord to keep personnel safe from electric shock.
Keep personnel safe from electric shock with these cords.
Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.
Power multiple devices with one extension cord.
Attach these splitters to an extension cord to power multiple devices from one cord.
A ratchet holds the extension cord on these reels in place at any length; a quick pull releases the cord and the spring-driven winding mechanism retracts it.
Made of impact-resistant plastic, these reels are more durable than other automatic-wind cord reels.
Make power accessible in wet and outdoor environments with these cord reels that resist water, oil, and UV light. A tug on the extension cord winds it up automatically, so you don’t have to wind it yourself.
The plug and outlets on these reels form an extra-tight connection with any device to keep it from detaching. They’re marked with a green dot to confirm that they’re hospital grade.
A steel stand makes these reels more rugged than light duty cord reels.
Plug a cord into these reels.
Stop electric shocks before they happen—these cords cut power to equipment when they detect an unsafe current.
Minimize the risk of electric shock by adding ground fault protection to a standard outlet.
Keep personnel safe from electric shock by adding ground fault protection to all outlets on the same circuit. These receptacles mount to DIN rail.
Minimize the risk of electric shock and electrical fires with a single receptacle.
Suitable for use outdoors, receptacles can be used in wet and damp environments. They keep personnel safe from electric shock by adding ground fault protection.
Install these receptacles indoors. They keep personnel safe from electric shock by adding ground fault protection.
When mated, connectors meet NEMA 6P, NEMA 12, and either IP67 or IP69K.
Keep personnel safe from electric shock by adding ground fault protection. These receptacles have an extra-tight fit when mated with plugs to withstand high vibration. Also known as hospital grade receptacles.
When mated, these connectors meet NEMA 6P for protection against washdowns and temporary submersion.
Mount these boxes to the outside of an enclosure to access a programmable logic controller or other networked device without opening the enclosure.