Bronze Wear Pads | McMaster-Carr

Filter by

Material

Bronze

Oil

System of Measurement

Thickness

Width

Shape

Length

Tolerance Rating

Performance

Ultra Corrosion Resistant

Ultra Wear Resistant

Yield Strength

Less than 20,000 psi

20,000 psi to 39,999 psi

60,000 psi to 99,999 psi

Filler Material

Oil

Hardness

Rockwell B95

Not Rated

Export Control Classification Number (ECCN)

Hardness Rating

REACH

RoHS

Compliant with Exemptions

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

DFARS Specialty Metals

Heat Treatable

Fabrication

Density

Temper Designation

Elongation

Specifications Met

Melting Point Temperature

Mechanical Finish

Conductivity Percentage

67 Products

Self-Lubricating Wear Plates

Image of Product. Front orientation. Wear Plates. Self-Lubricating.

Impact causes these porous bronze plates to release a thin layer of oil on the surface to minimize friction. Often found on conveyor systems and fabricating machinery, use these plates where friction between two parts or materials is wearing down equipment to extend equipment life. They can be used outdoors.

	Wd.	Lg.	For Use Outdoors		Each
Oil-Filled Bronze



	1/8"	5"	6"	Yes	6313T18	0000000


	1/4"	5"	6"	Yes	6313T21	000000
	3/8"	5"	6"	Yes	6313T22	000000

Tight-Tolerance High-Strength 863 Bearing Bronze Bars

Combine precision and high strength. These 863 bearing bronze bars come ground to paper-thin tolerances on top and bottom for parts that require pinpoint precision.

Alloyed with manganese, 863 is strong enough to carry heavy loads at high speeds when properly lubricated. Use it for parts that won't buckle or break under stress, such as heavy-load bearings and hydraulic cylinder components. Also known as manganese bronze.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

	Temper Designation	Specs. Met		1/2 ft. Long	1 ft. Long	2 ft. Long	3 ft. Long
1/2" Thick (-0.002" to 0.002" Tolerance)



	1"	M07	ASTM B505	5788N1	000000	0000000	0000000	0000000


	1 1/2"	M07	ASTM B505	5788N2	000000	000000	000000	000000
	2"	M07	ASTM B505	5788N3	000000	000000	000000	—
	3"	M07	ASTM B505	5788N5	000000	000000	000000	—
	4"	M07	ASTM B505	5788N6	000000	000000	000000	000000


	3/4" Thick (-0.002" to 0.002" Tolerance)



			3/4"	M07	ASTM B505	5788N9	00000	00000	000000	000000


			1"	M07	ASTM B505	5788N11	00000	000000	000000	000000
			1 1/2"	M07	ASTM B505	5788N12	000000	000000	000000	000000
			2"	M07	ASTM B505	5788N13	000000	000000	000000	000000


			1" Thick (-0.002" to 0.002" Tolerance)



					1"	M07	ASTM B505	5788N19	00000	000000	000000	000000


					1 1/2"	M07	ASTM B505	5788N21	00000	000000	000000	000000
					2 1/2"	M07	ASTM B505	5788N23	000000	000000	000000	—
					4"	M07	ASTM B505	5788N25	000000	000000	—	—
					5"	M07	ASTM B505	5788N26	000000	000000	—	—
					6"	M07	ASTM B505	5788N27	000000	000000	—	—

Oil-Embedded 841 Bearing Bronze Sheets

With a porous surface that releases oil over time, this bronze lubricates itself. Turn it into parts that you can't easily access to relubricate, such as bearings, well pumps, and turbine blades. The oil may burn away if temperatures climb too high, however. For extreme heat up to 700° F, consider graphite-embedded bearing bronze instead.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

	Lg.	Material	Temper Designation	Specs. Met		Each
1/8" Thick (-0.01" to 0.01" Tolerance)



	5"	6"	841 Bearing Bronze	Not Rated	ASTM B438	8933K11	0000000


	5"	8 1/8"	841 Bearing Bronze	Not Rated	ASTM B438	8933K31	000000
	6"	12"	841 Bearing Bronze	Not Rated	ASTM B438	8933K24	000000


	3/16" Thick (-0.01" to 0.01" Tolerance)



			5"	6"	841 Bearing Bronze	Not Rated	ASTM B438	8933K12	000000


			5"	8 1/8"	841 Bearing Bronze	Not Rated	ASTM B438	8933K32	000000
			6"	12"	840 Bearing Bronze	Not Rated	ASTM B438	8933K25	000000


			1/4" Thick (-0.01" to 0.01" Tolerance)



					5"	6"	841 Bearing Bronze	Not Rated	ASTM B438	8933K13	000000


					5"	8 1/8"	841 Bearing Bronze	Not Rated	ASTM B438	8933K33	000000
					6"	12"	840 Bearing Bronze	Not Rated	ASTM B438	8933K19	000000


					3/8" Thick (-0.01" to 0.01" Tolerance)



							5"	6"	841 Bearing Bronze	Not Rated	ASTM B438	8933K14	000000


							6"	12"	840 Bearing Bronze	Not Rated	ASTM B438	8933K21	000000


							1/2" Thick (-0.01" to 0.01" Tolerance)



									5"	6"	841 Bearing Bronze	Not Rated	ASTM B438	8933K15	000000


									5"	8 1/8"	841 Bearing Bronze	Not Rated	ASTM B438	8933K34	000000
									6"	12"	840 Bearing Bronze	Not Rated	ASTM B438	8933K22	000000


									5/8" Thick (-0.01" to 0.01" Tolerance)



											5"	6"	841 Bearing Bronze	Not Rated	ASTM B438	8933K16	000000


											6"	12"	840 Bearing Bronze	Not Rated	ASTM B438	8933K26	000000


											3/4" Thick (-0.01" to 0.01" Tolerance)



											5"	6"	841 Bearing Bronze	Not Rated	ASTM B438	8933K17	000000


											5"	8 1/8"	841 Bearing Bronze	Not Rated	ASTM B438	8933K35	000000
											6"	12"	840 Bearing Bronze	Not Rated	ASTM B438	8933K27	000000


											1" Thick (-0.01" to 0.01" Tolerance)



											5"	6"	841 Bearing Bronze	Not Rated	ASTM B438	8933K18	000000


											5"	8 1/8"	841 Bearing Bronze	Not Rated	ASTM B438	8933K36	000000
											6"	12"	840 Bearing Bronze	Not Rated	ASTM B438	8933K23	000000

Tight-Tolerance Corrosion-Resistant 954 Bearing Bronze Bars

Combine precision and corrosion resistance. These 954 bearing bronze bars come ground to paper-thin tolerances on top and bottom for parts that require pinpoint precision.

One of the most corrosion-resistant bearing bronze alloys, 954 withstands everything from sea water to sulfuric acid. It's often turned into bearings and valve bodies for demanding environments such as salt mines. Also known as aluminum bronze. If you need similar corrosion resistance with even greater strength, consider 955 bearing bronze instead.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

				1 ft. Long		2 ft. Long
	Wd.	Temper Designation	Specs. Met		Each		Each
1/4" Thick (-0.002" to 0.002" Tolerance)



		1"	M07	ASTM B505	4492T11	000000	4492T61	0000000


		1 1/2"	M07	ASTM B505	4492T75	00000	———	0
		2"	M07	ASTM B505	4492T12	00000	4492T62	000000
		2 1/2"	M07	ASTM B505	4492T74	000000	———	0
		3"	M07	ASTM B505	4492T13	000000	4492T63	000000


		3/8" Thick (-0.002" to 0.002" Tolerance)



				1"	M07	ASTM B505	4492T21	00000	4492T64	000000


				2"	M07	ASTM B505	4492T22	000000	4492T65	000000
				3"	M07	ASTM B505	4492T23	000000	———	0


				1/2" Thick (-0.002" to 0.002" Tolerance)



						1"	M07	ASTM B505	4492T31	00000	4492T66	000000


						2"	M07	ASTM B505	4492T32	000000	4492T67	000000
						3"	M07	ASTM B505	4492T33	000000	4492T68	000000
						6"	M07	ASTM B505	4492T76	000000	———	0


						3/4" Thick (-0.002" to 0.002" Tolerance)



								1"	M07	ASTM B505	4492T51	00000	4492T69	000000


								1 1/2"	M07	ASTM B505	4492T77	000000	———	0
								2"	M07	ASTM B505	4492T52	000000	4492T71	000000
								3"	M07	ASTM B505	4492T53	000000	4492T72	000000