Wire Rope Clamps with Thimbles—Not for Lifting
A clamp and thimble in one convenient fitting simplifies installation while providing support and fray protection to the wire rope loop. Use a torque wrench to tighten the clamp.
Warning: Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
Loop | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Wire Rope Dia. | Rope Turnback | For Wire Rope Construction | Inside Lg. | Inside Wd. | Overall Lg. | Fabrication | Required Torque, ft.-lbs. | Capacity, lbs. | Each | |
Bronze | ||||||||||
| 1/8" | 3 1/4" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC | 15/16" | 9/16" | 2 1/2" | Cast | 8 | 300 | 0000000 | 000000 |
| 3/16" | 3 3/4" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC | 1 1/8" | 21/32" | 2 7/8" | Cast | 12 | 600 | 0000000 | 00000 |
| 1/4" | 4 3/4" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC | 1 9/16" | 7/8" | 3 3/4" | Cast | 19 | 1,000 | 0000000 | 00000 |
| 5/16" | 5 1/4" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC | 1 15/16" | 1 1/16" | 4 5/8" | Cast | 19 | 1,600 | 0000000 | 00000 |
Clevis-End Plug-Lock Wire Rope End Fittings—For Lifting
Fray the end of the wire rope with a marlin spike and screw the socket over the plug to install. An inspection hole confirms proper installation—If wire strands are visible, the fitting has been properly secured.
Use an assembly kit (not included) to support the wire rope while you drive the plug into the wire rope end.
Zinc-plated steel fittings have mild corrosion resistance.
316 stainless steel fittings are the most corrosion resistant fittings we offer. They have excellent resistance to salt water and chemicals.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
For Wire Rope | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Dia. | Construction | End-to-End Lg. | Clevis Inside Wd. | Sleeve Dia. | Pin Dia. | Cap., lbs. | Specifications Met | Each | |
Steel | |||||||||
| 3/64"-1/16" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 1/16" | 3/16" | 1/2" | 3/16" | 90 | ASME B30.26, ASME B30.9 | 0000000 | 000000 |
| 5/64"-3/32" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 1/2" | 1/4" | 5/8" | 1/4" | 100 | ASME B30.26, ASME B30.9 | 0000000 | 00000 |
| 1/8" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 1/2" | 1/4" | 5/8" | 1/4" | 300 | ASME B30.26, ASME B30.9 | 0000000 | 00000 |
| 3/16" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 1/8" | 5/16" | 3/4" | 5/16" | 700 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
| 1/4" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 3/4" | 3/8" | 15/16" | 3/8" | 1,300 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
| 3/8" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 4 13/16" | 7/16" | 1 3/16" | 1/2" | 3,000 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
Zinc-Plated Steel | |||||||||
| 3/64"-1/16" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 1/16" | 3/16" | 1/2" | 3/16" | 90 | ASME B30.26, ASME B30.9 | 0000000 | 00000 |
| 5/64"-3/32" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 1/2" | 1/4" | 5/8" | 1/4" | 100 | ASME B30.26, ASME B30.9 | 0000000 | 00000 |
| 1/8" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 1/2" | 1/4" | 5/8" | 1/4" | 300 | ASME B30.26, ASME B30.9 | 0000000 | 00000 |
| 3/16" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 1/8" | 5/16" | 3/4" | 5/16" | 700 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
| 1/4" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 3/4" | 3/8" | 15/16" | 3/8" | 1,300 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
| 3/8" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 4 13/16" | 7/16" | 1 3/16" | 1/2" | 3,000 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
316 Stainless Steel | |||||||||
| 3/64"-1/16" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 1/16" | 3/16" | 1/2" | 3/16" | 90 | ASME B30.26, ASME B30.9 | 0000000 | 00000 |
| 5/64"-3/32" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 1/2" | 1/4" | 5/8" | 1/4" | 100 | ASME B30.26, ASME B30.9 | 0000000 | 00000 |
| 1/8" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 1/2" | 1/4" | 5/8" | 1/4" | 300 | ASME B30.26, ASME B30.9 | 0000000 | 00000 |
| 3/16" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 1/8" | 5/16" | 3/4" | 5/16" | 700 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
| 1/4" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 3/4" | 3/8" | 15/16" | 3/8" | 1,300 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
| 3/8" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 4 13/16" | 7/16" | 1 3/16" | 1/2" | 3,000 | ASME B30.26, ASME B30.9 | 00000000 | 000000 |
Stud-End Plug-Lock Wire Rope End Fittings—For Lifting
Fray the end of the wire rope with a marlin spike and screw the socket over the plug to install. An inspection hole confirms proper installation—If wire strands are visible, the fitting has been properly secured.
Use an assembly kit (not included) to support the wire rope while you drive the plug into the wire rope end.
Zinc-plated steel fittings have mild corrosion resistance.
316 stainless steel fittings are the most corrosion resistant fittings we offer. They have excellent resistance to salt water and chemicals.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Never exceed load capacity. Do not use with coated rope unless the coating is removed.
For Wire Rope | Thread | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Dia. | Construction | O'all Lg. | Size | Lg. | Sleeve Dia. | Cap., lbs. | Specifications Met | Each | |
Steel | |||||||||
| 3/64"-1/16" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 1/16" | 10-32 | 1 9/16" | 1/2" | 90 | ASME B30.26, ASME B30.9 | 0000000 | 000000 |
| 5/64"-3/32" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 1/2" | 1/4"-28 | 1 7/8" | 9/16" | 100 | ASME B30.26, ASME B30.9 | 0000000 | 00000 |
| 1/8" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 1/2" | 1/4"-28 | 1 7/8" | 9/16" | 300 | ASME B30.26, ASME B30.9 | 0000000 | 00000 |
| 1/8" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 4 1/8" | 1/4"-20 | 2 1/2" | 5/8" | 300 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
| 3/16" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 4 3/16" | 3/8"-24 | 2 3/16" | 3/4" | 700 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
| 3/16" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 6 5/16" | 3/8"-16 | 4 1/8" | 3/4" | 700 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
| 1/4" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 7 1/16" | 1/2"-20 | 4 9/16" | 7/8" | 1,300 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
| 1/4" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 8" | 1/2"-13 | 5" | 1" | 1,300 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
| 3/8" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 8 3/16" | 3/4"-16 | 4 15/16" | 1 1/8" | 3,000 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
| 3/8" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 8 1/4" | 5/8"-11 | 4 1/2" | 1 1/8" | 3,000 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
| 1/2" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 10 15/16" | 3/4"-10 | 6 3/8" | 1 1/2" | 5,300 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
| 1/2" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 11" | 7/8"-14 | 6 15/16" | 1 7/16" | 5,300 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
Zinc-Plated Steel | |||||||||
| 3/64"-1/16" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 1/16" | 10-32 | 1 9/16" | 1/2" | 90 | ASME B30.26, ASME B30.9 | 0000000 | 00000 |
| 5/64"-3/32" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 1/2" | 1/4"-28 | 1 7/8" | 9/16" | 100 | ASME B30.26, ASME B30.9 | 0000000 | 00000 |
| 1/8" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 1/2" | 1/4"-28 | 1 7/8" | 9/16" | 300 | ASME B30.26, ASME B30.9 | 0000000 | 00000 |
| 1/8" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 4 1/8" | 1/4"-20 | 2 1/2" | 5/8" | 300 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
| 3/16" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 4 3/16" | 3/8"-24 | 2 3/16" | 3/4" | 700 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
| 3/16" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 6 5/16" | 3/8"-16 | 4 1/8" | 3/4" | 700 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
| 1/4" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 7 1/16" | 1/2"-20 | 4 9/16" | 7/8" | 1,300 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
| 1/4" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 8" | 1/2"-13 | 5" | 1" | 1,300 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
| 3/8" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 8 3/16" | 3/4"-16 | 4 15/16" | 1 1/8" | 3,000 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
| 3/8" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 8 1/4" | 5/8"-11 | 4 1/2" | 1 1/8" | 3,000 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
| 1/2" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 10 15/16" | 3/4"-10 | 6 3/8" | 1 1/2" | 5,300 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
| 1/2" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 11" | 7/8"-14 | 6 15/16" | 1 7/16" | 5,300 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
316 Stainless Steel | |||||||||
| 3/64"-1/16" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 1/16" | 10-32 | 1 9/16" | 1/2" | 90 | ASME B30.26, ASME B30.9 | 0000000 | 00000 |
| 5/64"-3/32" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 1/2" | 1/4"-28 | 1 7/8" | 9/16" | 100 | ASME B30.26, ASME B30.9 | 0000000 | 00000 |
| 1/8" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 1/2" | 1/4"-28 | 1 7/8" | 9/16" | 300 | ASME B30.26, ASME B30.9 | 0000000 | 00000 |
| 1/8" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 4 1/8" | 1/4"-20 | 2 1/2" | 5/8" | 300 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
| 3/16" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 4 3/16" | 3/8"-24 | 2 3/16" | 3/4" | 700 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
| 3/16" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 6 5/16" | 3/8"-16 | 4 1/8" | 3/4" | 700 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
| 1/4" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 7 1/16" | 1/2"-20 | 4 9/16" | 7/8" | 1,300 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
| 1/4" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 8" | 1/2"-13 | 5" | 1" | 1,300 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
| 3/8" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 8 3/16" | 3/4"-16 | 4 15/16" | 1 1/8" | 3,000 | ASME B30.26, ASME B30.9 | 00000000 | 000000 |
| 3/8" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 8 1/4" | 5/8"-11 | 4 1/2" | 1 1/8" | 3,000 | ASME B30.26, ASME B30.9 | 00000000 | 000000 |
| 1/2" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 10 15/16" | 3/4"-10 | 6 3/8" | 1 1/2" | 5,300 | ASME B30.26, ASME B30.9 | 00000000 | 000000 |
| 1/2" | 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 11" | 7/8"-14 | 6 15/16" | 1 7/16" | 5,300 | ASME B30.26, ASME B30.9 | 00000000 | 000000 |
Eye-End Plug-Lock Wire Rope End Fittings—For Lifting
Fray the end of the wire rope with a marlin spike and screw the socket over the plug to install. An inspection hole confirms proper installation—If wire strands are visible, the fitting has been properly secured.
Use an assembly kit (not included) to support the wire rope while you drive the plug into the wire rope end.
Zinc-plated steel fittings have mild corrosion resistance.
316 stainless steel fittings are the most corrosion resistant fittings we offer. They have excellent resistance to salt water and chemicals.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
For Wire Rope | Eye | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Dia. | Construction | End-to-Eye Lg. | ID | Thick. | Sleeve Dia. | Cap., lbs. | Specifications Met | Each | |
Steel | |||||||||
| 3/64"-1/16" | 6 × 36 Fiber Core 6 × 36 Strand Core 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 1 25/32" | 3/16" | 3/16" | 1/2" | 90 | ASME B30.26, ASME B30.9 | 0000000 | 000000 |
| 5/64"-3/32" | 6 × 36 Fiber Core 6 × 36 Strand Core 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 1/8" | 1/4" | 1/4" | 5/8" | 100 | ASME B30.26, ASME B30.9 | 0000000 | 00000 |
| 1/8" | 6 × 36 Fiber Core 6 × 36 Strand Core 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 1/8" | 1/4" | 1/4" | 5/8" | 300 | ASME B30.26, ASME B30.9 | 0000000 | 00000 |
| 3/16" | 6 × 36 Fiber Core 6 × 36 Strand Core 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 19/32" | 5/16" | 5/16" | 3/4" | 600 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
| 1/4" | 6 × 36 Fiber Core 6 × 36 Strand Core 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 1/4" | 3/8" | 3/8" | 15/16" | 1,100 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
| 3/8" | 6 × 36 Fiber Core 6 × 36 Strand Core 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 4 7/32" | 1/2" | 7/16" | 1 3/16" | 2,600 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
Zinc-Plated Steel | |||||||||
| 3/64"-1/16" | 6 × 36 Fiber Core 6 × 36 Strand Core 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 1 25/32" | 3/16" | 3/16" | 1/2" | 90 | ASME B30.26, ASME B30.9 | 0000000 | 00000 |
| 5/64"-3/32" | 6 × 36 Fiber Core 6 × 36 Strand Core 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 1/8" | 1/4" | 1/4" | 5/8" | 100 | ASME B30.26, ASME B30.9 | 0000000 | 00000 |
| 1/8" | 6 × 36 Fiber Core 6 × 36 Strand Core 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 1/8" | 1/4" | 1/4" | 5/8" | 300 | ASME B30.26, ASME B30.9 | 0000000 | 00000 |
| 3/16" | 6 × 36 Fiber Core 6 × 36 Strand Core 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 19/32" | 5/16" | 5/16" | 3/4" | 600 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
| 1/4" | 6 × 36 Fiber Core 6 × 36 Strand Core 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 1/4" | 3/8" | 3/8" | 15/16" | 1,100 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
| 3/8" | 6 × 36 Fiber Core 6 × 36 Strand Core 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 4 7/32" | 1/2" | 7/16" | 1 3/16" | 2,600 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
316 Stainless Steel | |||||||||
| 3/64"-1/16" | 6 × 36 Fiber Core 6 × 36 Strand Core 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 1 25/32" | 3/16" | 3/16" | 1/2" | 90 | ASME B30.26, ASME B30.9 | 0000000 | 00000 |
| 5/64"-3/32" | 6 × 36 Fiber Core 6 × 36 Strand Core 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 1/8" | 1/4" | 1/4" | 5/8" | 100 | ASME B30.26, ASME B30.9 | 0000000 | 00000 |
| 1/8" | 6 × 36 Fiber Core 6 × 36 Strand Core 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 1/8" | 1/4" | 1/4" | 5/8" | 300 | ASME B30.26, ASME B30.9 | 0000000 | 00000 |
| 3/16" | 6 × 36 Fiber Core 6 × 36 Strand Core 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 19/32" | 5/16" | 5/16" | 3/4" | 600 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
| 1/4" | 6 × 36 Fiber Core 6 × 36 Strand Core 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3 1/4" | 3/8" | 3/8" | 15/16" | 1,100 | ASME B30.26, ASME B30.9 | 00000000 | 00000 |
| 3/8" | 6 × 36 Fiber Core 6 × 36 Strand Core 6 × 19 IWRC 6 × 19 Fiber Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 4 7/32" | 1/2" | 7/16" | 1 3/16" | 2,600 | ASME B30.26, ASME B30.9 | 00000000 | 000000 |
Swivel-Hook-End Plug-Lock Wire Rope End Fittings—For Lifting
Fray the end of the wire rope with a marlin spike and screw the socket over the plug to install. An inspection hole confirms proper installation—If wire strands are visible, the fitting has been properly secured.
Use an assembly kit (not included) to support the wire rope while driving the plug into the wire rope end.
Zinc-plated steel fittings have mild corrosion resistance.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
For Wire Rope | Hook | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Construction | Sleeve Dia. | Usable Lg. | Opening Wd. | Wd. | Fabrication | Material | Cap., lbs. | Specifications Met | Each | |
Steel | |||||||||||
| 3/16" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3/4" | 5 31/32" | 1" | 9/16" | Forged | Steel | 665 | ASME B30.26 | 0000000 | 0000000 |
| 1/4" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 15/16" | 7 7/16" | 1 1/16" | 5/8" | Forged | Steel | 1,175 | ASME B30.26 | 0000000 | 000000 |
| 3/8" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 1 1/8" | 8 17/32" | 1 1/4" | 27/32" | Forged | Steel | 2,620 | ASME B30.26 | 0000000 | 000000 |
Zinc-Plated Steel | |||||||||||
| 3/16" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 3/4" | 5 31/32" | 1" | 9/16" | Forged | Steel | 665 | ASME B30.26 | 0000000 | 000000 |
| 1/4" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 15/16" | 6 27/32" | 1 1/16" | 5/8" | Forged | Steel | 1,175 | ASME B30.26 | 0000000 | 000000 |
| 5/16" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 15/16" | 7 19/32" | 1 1/8" | 3/4" | Forged | Steel | 1,830 | ASME B30.26 | 0000000 | 000000 |
| 3/8" | 6 × 7 Fiber Core 6 × 19 IWRC 6 × 19 Fiber Core 6 × 26 IWRC 6 × 37 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 1 1/8" | 8 17/32" | 1 1/4" | 27/32" | Forged | Steel | 2,620 | ASME B30.26 | 0000000 | 000000 |
Plugs for Plug-Lock Wire Rope End Fittings—For Lifting
Use a new plug when installing a fitting on a different rope.
For Wire Rope | ||||
|---|---|---|---|---|
| Dia. | Construction | Material | Each | |
| 1/16" | 6 × 19 IWRC, 6 × 19 Fiber Core, 7 × 7 Strand Core, 7 × 19 IWRC, 7 × 19 Strand Core | Brass | 0000000 | 00000 |
| 3/32" | 6 × 19 IWRC, 6 × 19 Fiber Core, 7 × 7 Strand Core, 7 × 19 IWRC, 7 × 19 Strand Core | Brass | 0000000 | 0000 |
| 1/8" | 6 × 19 IWRC, 6 × 19 Fiber Core, 7 × 7 Strand Core, 7 × 19 IWRC, 7 × 19 Strand Core | Brass | 0000000 | 0000 |
| 5/32" | 6 × 19 IWRC, 6 × 19 Fiber Core, 7 × 7 Strand Core, 7 × 19 IWRC, 7 × 19 Strand Core | Brass | 0000000 | 0000 |
| 3/16" | 6 × 19 IWRC, 6 × 19 Fiber Core, 7 × 7 Strand Core, 7 × 19 IWRC, 7 × 19 Strand Core | Brass | 0000000 | 00000 |
| 7/32" | 6 × 19 IWRC, 6 × 19 Fiber Core, 7 × 7 Strand Core, 7 × 19 IWRC, 7 × 19 Strand Core | Brass | 0000000 | 00000 |
| 1/4" | 6 × 19 IWRC, 6 × 19 Fiber Core, 7 × 7 Strand Core, 7 × 19 IWRC, 7 × 19 Strand Core | Brass | 0000000 | 00000 |
| 9/32" | 6 × 19 IWRC, 6 × 19 Fiber Core, 7 × 7 Strand Core, 7 × 19 IWRC, 7 × 19 Strand Core | Brass | 0000000 | 00000 |
| 3/8" | 6 × 19 IWRC, 6 × 19 Fiber Core, 7 × 7 Strand Core, 7 × 19 IWRC, 7 × 19 Strand Core | Brass | 0000000 | 00000 |
| 1/2" | 6 × 19 IWRC, 6 × 19 Fiber Core, 7 × 7 Strand Core, 7 × 19 IWRC, 7 × 19 Strand Core | Brass | 0000000 | 00000 |
Hook-End Feed-Through Wire Rope End Fittings—Not for Lifting
Feed the wire rope into the opening at the bottom of these fittings and through the body for a quick and simple installation.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
For Wire Rope | Hook | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Dia. | Construction | Sleeve Dia. | Usable Lg. | Opening Wd. | Wd. | Material | Capacity, lbs. | Each | |
Nickel-Plated Brass | |||||||||
| 3/64"-1/16" | 7 × 7 Strand Core 7 × 19 Strand Core | 11/32" | 2 31/32" | 17/32" | 1/4" | Steel | 25 | 0000000 | 00000 |
| 5/64"-3/32" | 7 × 7 Strand Core 7 × 19 Strand Core | 15/32" | 3 9/16" | 17/32" | 1/4" | Steel | 50 | 0000000 | 00000 |
| 3/32"-1/8" | 7 × 7 Strand Core 7 × 19 Strand Core | 19/32" | 4 7/32" | 17/32" | 1/4" | Steel | 110 | 0000000 | 00000 |
Eye-End Feed-Through Wire Rope End Fittings—Not for Lifting
Feed the wire rope into the opening at the bottom of these fittings and through the body for a quick and simple installation.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
Clevis-End Feed-Through Wire Rope End Fittings—Not for Lifting
Feed the wire rope into the opening at the bottom of these fittings and through the body for a quick and simple installation.
Warning: Fittings must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
For Wire Rope | ||||||||
|---|---|---|---|---|---|---|---|---|
| Dia. | Construction | End-to-End Lg. | Clevis Inside Wd. | Sleeve Dia. | Pin Dia. | Capacity, lbs. | Each | |
Nickel-Plated Brass | ||||||||
| 3/64"-1/16" | 7 × 7 Strand Core 7 × 19 Strand Core | 1 23/32" | 5/16" | 9/16" | 5/16" | 25 | 0000000 | 000000 |
| 1/16"-3/32" | 7 × 7 Strand Core 7 × 19 Strand Core | 2 7/32" | 1/4" | 15/32" | 1/4" | 50 | 0000000 | 00000 |
| 3/32"-1/8" | 7 × 7 Strand Core 7 × 19 Strand Core | 3 17/32" | 3/8" | 19/32" | 3/8" | 110 | 0000000 | 00000 |
