We will reply to your message within an hour.
These rails have continuous T-slots for attaching fittings. Use this versatile framing to configure machine guards, enclosures, carts, and workstations.
Connect T‐slotted rails and reinforce joints for structural stability.
Screw and nut sets or nuts secure brackets and other accessories to rails.
Mount components to these load-rated bearings and track rollers to add linear motion along T-slotted rails.
Pivots provide smooth motion at the junction between two T-slotted rails.
Attach sensors, tubes, and other components to T-slotted framing rails and structures.
Use hinges to add doors, lids, and machine guards to T-slotted framing.
Add mounting feet and casters to T-slotted framing structures to level equipment, anchor legs to the floor, or add mobility.
Stay organized with hooks, bin boxes, shelves, and tool holders that work with T-slotted framing.
Seal T-slots, rail ends, and gaps between rails to keep out dust, debris, and other contaminants.
Add a convenient grip to steer carts or open and close doors, windows, and drawers made of T-slotted framing.
Add panels to T-slotted framing to create machine guards, strip doors, and welding curtains.
Slide drawers, panels, and doors with these tracks and rollers.
Route wires, cables, and tubing along T‐slotted rails.
Illuminate workstations, enclosures, and machines.
Secure doors and windows made of T-slotted framing to protect valuables or restrict access for safety.
Distribute compressed air, hydraulic fluid, or water from a single supply to multiple locations.
Attach and position phones, tablets, monitors, and other displays on T-slotted rails.
Bumpers cushion doors and other moving parts to prevent damage and reduce noise.
For repetitive workholding, mount these clamps to T-slotted framing to hold and release parts.
Add rollers to T-slotted framing to create flow rails, ball transfer tables, and other manual conveyors.
Align and drill accurate holes in T-slotted rails with these reusable templates.
Add electrical outlets to workstations with these outlet strips that mount on T-slotted rails.
Control static and ground T-slotted framing structures with these bonding and grounding components.
Mount these bull's eye levels to workstation and table frames made of T-slotted framing for easy leveling in all directions on the horizontal plane.
Get projects off to a quick start with these kits that include the components you need to build simple structures, such as workbenches and stands.
Half the height and the same width as regular strut channel, this low-profile strut channel fits into tight spots and is compatible with many of the same brackets.
This welded, one-piece strut channel combines two strut channels back-to-back.
This welded, one-piece strut channel combines two strut channels side-to-side.
Up to two times the height of regular strut channel, this high-profile channel is stronger than regular strut channel.
Slide the strut channel into the tube for telescoping length adjustments.
Run cable and tubing in the tightest spaces with channel that is one-quarter the height and one-half the width of regular strut channel.
For compatibility with quick-connect clamps to secure pipe and conduit without screws and tools, this strut channel has narrow slotted holes.
A spring plus serrated grooves that grip the lip of the channel provide a more secure hold than standard strut channel nuts.
Serrated grooves grip the lip of the channel.
There's no need for additional fasteners with these nuts—they combine a strut channel nut with a spring and a threaded stud.
In addition to serrated grooves for gripping the lip of the channel, these nuts have wings for easy positioning.
Quickly attach these nuts by twisting them closed at any point along a threaded rod.
Also known as insert nuts, these convert slotted holes to threaded round holes and keep them centered in the channel.
Insert these nuts into the long open side of strut channel and twist to secure. A built-in washer enables one-handed installation.
A tab fits tightly against the lip of the channel to keep these nuts from slipping.
Keep a rod securely centered against the strut channel.
Connect two channels to create a stacked channel.
Push these nuts into place rather than threading them onto a fastener.
Use with hex nuts to connect threaded rod.
Keep hardware centered in the strut channel slot.
Add hardware to strut channel without having to hold the washer in place or reach inside the channel.
Notches on these washers grip the channel to keep them in place.
Designed to wrap around the sides of strut channel, these brackets provide a stronger hold than other strut channel brackets.
Push these brackets into strut channel and tighten the included cam screws for a partially concealed connection.
These brackets have narrow slots compatible with quick-connect clamps for securing pipe and conduit on the channel side of struts without screws or tools.
Brackets mount on the outside of strut channel to allow trolley movement.
Securely fasten strut channel to the floor.
Provide a stable, nonmarring base for strut channel legs.
Mount a length of strut channel between the ends of a beam to run cable and conduit along the beam without drilling.
A tab on the end of these shelf brackets fits inside the strut channel for extra stability.
Cover rough ends of strut channel.
Support the corners of strut channel structures.
Create a four-sided raceway for cable, or give a more finished look to strut channel structures.
Position two strut channels at a 30° to 60° angle, then tighten the bolt to secure.
Slip these hangers onto the lip of top-opening strut channel to attach chain, wire rope, pipe, and threaded rod.
For quick mounting of components, these hangers snap into strut channels for a strong hold and easy repositioning.
Provide smooth motion between two pieces of strut channel.
Half the weight of steel, this aluminum framing resists corrosion in wet environments.
To provide corrosion resistance in wet environments, this framing is galvanized.
Stronger than plastic and aluminum, this is the lightest weight framing we offer. It has good resistance to chemicals and salt water.
In addition to being lightweight and strong, this plastic framing is nonconductive with good resistance to chemicals and salt water.
Made of 316 stainless steel, this framing has excellent resistance to chemicals and salt water.
No need for fasteners—friction holds this framing together. Use press-fit framing and fittings to assemble carts, enclosures, and partitions.
Rails are drilled with consistently spaced holes for multiple mounting options that do not require machining. Use this steel bolt-together framing to build guards, tables, and racks.
Thick construction makes this framing strong and sturdy.
Fittings come in two pieces to wrap around rails, so you can quickly modify existing structures without disassembling. Use clamp-on framing and fittings to form temporary partitions, modular conveyors, and workstations.
Create posts of varying lengths.
Create strong structures by welding this framing together. Add metal panels to close off openings.
Build test fixtures, prototypes, and other small structures with this miniature version of T-slotted framing and fittings.
These brackets have greater weight capacities than standard duty fold-away shelf brackets.
These brackets allow you to lower your shelf 10 or 20 degrees.
These shelf brackets have a 500-lb. capacity—twice the capacity of our other shelf brackets.
These standards and shelf brackets are more stable and hold heavier loads than single-slotted standards and brackets.
Design a complete shelving unit with these standards, shelf brackets, and metal shelves. All components are corrosion resistant and are often used for quality control, laboratory, and food service applications.
These standards mount to a hanging bracket or track, making them easier to install than other standards.
These standards can be surface mounted or flush mounted inside a routed groove.
Hold shelves in cabinets and bookcases without standards.
A plastic-laminate finish protects these shelves from stains and scratches.
These shelves are durable and easy to clean.
These shelves are corrosion resistant and vented to prevent dust buildup.
Support strut channel at a right angle to the beam.
Mount these shelves in standard electronics cabinets that are 19 in. wide to hold components that cannot fit directly to the enclosure.
Weld these caps and targets to the ends of posts to create stackable shelving and racking systems.