How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Push-to-Connect Fittings for Food and Beverage
- Temperature Range: 35° to 140° F
- Tubing: See table
- Specifications Met: See table
Also known as instant fittings, these connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. To disconnect fittings with a release ring, push on the release ring and pull the tubing out of the fitting.
Polypropylene fittings have excellent impact and abrasion resistance. They meet NSF/ANSI standards for safe use with food. Some are also FDA compliant for indirect contact with food.
Acetal fittings resist moisture, so they won’t soften and lose strength in humid environments. They meet NSF/ANSI 51 for safe use with food and NSF/ANSI 61 for safe use with drinking water.
Black fittings have excellent UV resistance and are suitable for outdoor environments.
For technical drawings and 3-D models, click on a part number.
Through-wall fittings are also known as bulkhead couplings and panel-mount couplings; they mount through your wall or panel to create an inlet or outlet.
| For Tube OD | Material | Release Ring Color | Max. Pressure | For Tube Hardness Rating | For Tube Hardness | Specifications Met | For Hole Dia. | For Max. Wall Thick. | Each | |
White | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 1/4" | Polypropylene Plastic | White | 150 psi @ 72° F | Hard | Durometer 50D-70D | NSF/ANSI 51, NSF/ANSI 61 | 43/64" | 5/8" | 0000000 | 00000 |
| 3/8" | Polypropylene Plastic | White | 150 psi @ 72° F | Hard | Durometer 50D-70D | NSF/ANSI 51, NSF/ANSI 61 | 51/64" | 1/2" | 0000000 | 0000 |
| 1/2" | Polypropylene Plastic | White | 150 psi @ 72° F | Hard | Durometer 50D-70D | NSF/ANSI 51, NSF/ANSI 61 | 1 3/32" | 3/4" | 0000000 | 00000 |
Black | ||||||||||
| 1/4" | Polypropylene Plastic | Black | 150 psi @ 72° F | Hard | Durometer 50D-70D | NSF/ANSI 58, NSF/ANSI 372, FDA Compliant 21 CFR 176.170 | 43/64" | 19/32" | 00000000 | 0000 |
| 3/8" | Polypropylene Plastic | Black | 150 psi @ 72° F | Hard | Durometer 50D-70D | NSF/ANSI 58, NSF/ANSI 372, FDA Compliant 21 CFR 176.170 | 51/64" | 5/8" | 00000000 | 0000 |
| 1/2" | Polypropylene Plastic | Black | 150 psi @ 72° F | Hard | Durometer 50D-70D | NSF/ANSI 58, NSF/ANSI 372, FDA Compliant 21 CFR 176.170 | 1 3/32" | 45/64" | 00000000 | 0000 |
| 4mm | Acetal Plastic | __ | 150 psi @ 72° F | Hard | Durometer 85D-95D | NSF/ANSI 51, NSF/ANSI 61 | 15mm | 8mm | 0000000 | 0000 |
| 6mm | Acetal Plastic | __ | 150 psi @ 72° F | Hard | Durometer 85D-95D | NSF/ANSI 51, NSF/ANSI 61 | 17mm | 9mm | 0000000 | 0000 |
| 10mm | Acetal Plastic | __ | 150 psi @ 72° F | Hard | Durometer 85D-95D | NSF/ANSI 51, NSF/ANSI 61 | 24mm | 11mm | 0000000 | 0000 |
| 12mm | Acetal Plastic | __ | 150 psi @ 72° F | Hard | Durometer 85D-95D | NSF/ANSI 51, NSF/ANSI 61 | 27mm | 16mm | 0000000 | 0000 |
Through-wall fittings are also known as bulkhead couplings and panel-mount couplings; they mount through your wall or panel to create an inlet or outlet.
| For Tube OD (A) | For Tube OD (B) | Material | Release Ring Color | Max. Pressure | For Tube Hardness Rating | For Tube Hardness | Specifications Met | For Hole Dia. | For Max. Wall Thick. | Each | |
White | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 3/8" | 1/4" | Polypropylene Plastic | White | 150 psi @ 72° F | Hard | Durometer 50D | NSF/ANSI 51, NSF/ANSI 61 | 27/32" | 5/8" | 00000000 | 00000 |
Quick-Disconnect Tube Couplings for Food and Beverage
- Temperature Range:
Acetal Plastic: -40° to 180° F
Polypropylene Plastic: 32° to 160° F - Tubing:
Barbed Fittings: Use with soft or firm (Durometer 65A-80A) polyurethane rubber
Compression Fittings: Use with hard or firm (Durometer 80A-60D) nylon or polyethylene plastic - Specifications Met: NSF/ANSI 169
Couplings consist of a plug and a socket (sold separately) that join with a latch, so you can frequently connect and disconnect your line. To connect, insert the plug into the socket; to disconnect, press the latch on the socket and remove the plug. They’re made of FDA-approved materials, including moisture-resistant plastic that won’t absorb liquid and lose strength, even in high-humidity food and beverage applications.
Plugs and sockets with shut-off have a valve to stop the flow when the coupling is separated, so fluid won’t spill from your line.
Note: For a complete coupling, order a plug and a socket with the same coupling size.
For technical drawings and 3-D models, click on a part number.
Barbed sockets insert into tubing and secure with a clamp.
Through-wall sockets are also known as bulkhead sockets and panel-mount sockets; they mount through your wall or panel to create an inlet or outlet.
| Coupling Size | For Plug OD | For Tube ID | Material | Color | Clarity | Max. Pressure | For Hole Dia. | For Max. Wall Thick. | Each | |
Open Flow | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 3/8 | 3/4" | 1/2" | Polypropylene Plastic | Gray | Opaque | 60 psi @ 72° F | 1 3/16" | 1/4" | 0000000 | 000000 |
With Shut-Off | ||||||||||
| 3/8 | 3/4" | 3/8" | Polypropylene Plastic | Gray | Opaque | 60 psi @ 72° F | 1 3/16" | 1/4" | 0000000 | 00000 |
| 3/8 | 3/4" | 1/2" | Polypropylene Plastic | Gray | Opaque | 60 psi @ 72° F | 1 3/16" | 1/4" | 0000000 | 00000 |
Compression Tube Fittings for Food and Beverage
- Temperature Range: -40° to 200° F
- Tubing: Use with firm or hard (Durometer 45D-65D) EVA plastic, nylon plastic, polyethylene plastic, polypropylene plastic, or polyurethane rubber
- Specifications Met: NSF/ANSI 51
A single sleeve (ferrule) and a gripping ring compress the tubing as you tighten the nut, creating a strong seal. The nut, sleeve, and gripping ring are included. Fittings are also known as flareless fittings. They are nylon for excellent impact and abrasion resistance.
For technical drawings and 3-D models, click on a part number.
Through-wall fittings are also known as bulkhead couplings and panel-mount couplings; they mount through your wall or panel to create an inlet or outlet.
| For Tube OD | Material | Color | Gripping Ring Material | Max. Pressure | For Hole Dia. | For Max. Wall Thick. | Each | |
| 1/4" | Nylon Plastic | White | 302 Stainless Steel | 300 psi @ 72° F | 5/8" | 3/8" | 000000000 | 00000 |
| 5/16" | Nylon Plastic | White | 302 Stainless Steel | 300 psi @ 72° F | 5/8" | 3/8" | 000000000 | 00000 |
| 3/8" | Nylon Plastic | White | 302 Stainless Steel | 250 psi @ 72° F | 3/4" | 1/2" | 000000000 | 00000 |
| 1/2" | Nylon Plastic | White | 302 Stainless Steel | 200 psi @ 72° F | 15/16" | 1/2" | 000000000 | 00000 |
Nut | Sleeve | |||||||
|---|---|---|---|---|---|---|---|---|
| For Tube OD | Material | Color | Material | Color | Gripping Ring Material | Max. Pressure | Each | |
| 1/4" | Nylon Plastic | White | Nylon Plastic | White | 302 Stainless Steel | 300 psi @ 72° F | 000000000 | 00000 |
| 5/16" | Nylon Plastic | White | Nylon Plastic | White | 302 Stainless Steel | 300 psi @ 72° F | 000000000 | 0000 |
| 3/8" | Nylon Plastic | White | Nylon Plastic | White | 302 Stainless Steel | 250 psi @ 72° F | 000000000 | 0000 |
| 1/2" | Nylon Plastic | White | Nylon Plastic | White | 302 Stainless Steel | 200 psi @ 72° F | 000000000 | 0000 |
Tube supports are recommended if you want to use fittings with soft plastic and rubber tubing to prevent the tube from collapsing.