Filter by
Thread Size
Shape
Hardness Rating
Capacity per Mount
Hardness
Base Diameter
Performance
Base Material
System of Measurement
Overall Height
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Minimum Temperature
Maximum Temperature
Stud Material
Reinforced Threaded-Hole Bumpers
 |
Style 1 |
With a metal core or base plate for added strength, these bumpers withstand repeated impacts for a longer service life than all-rubber bumpers. You can also use them as spacers, vibration dampers, and noise reducers. Twist them onto a threaded stud on your equipment, or pair them with your own stud to create a custom-length bumper.
Style 1
|
 |
Multipurpose Neoprene—A good choice for oily equipment that's exposed to sunlight, rain, and ozone. These aren't as oil resistant as Buna-N bumpers, but they can be used outdoors.
Abrasion-Resistant Polyurethane Rubber—Our toughest rubber bumpers, they keep their shape even when knocked and scraped by metal and other abrasive materials. They're often used on industrial vehicles, conveyors, and heavy construction equipment.
Oil-Resistant Buna-N—These bumpers resist oil and fuels better than other rubber bumpers. Use them on frequently lubricated machinery and oily equipment, such as engines and pumps.
Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.
Thread | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Dp. | OD | Ht. | Hardness | Hardness Rating | Color | Temp., ° F | Core Material | Nonmarking | For Use Outdoors | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Multipurpose Neoprene | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 1" | 2 1/4" | 2 1/4" | Durometer 40A | Medium Soft | Black | -40 to 200 | Steel | No | Yes | 9546K15 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 1" | 2 1/4" | 2 1/4" | Durometer 75A | Hard | Black | -40 to 200 | Steel | No | Yes | 9546K526 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Abrasion-Resistant Polyurethane Rubber | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 1" | 2 1/4" | 2 1/4" | Durometer 40A | Medium Soft | Red | -40 to 200 | Steel | No | Yes | 9223K16 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 1" | 2 1/4" | 2 1/4" | Durometer 50A | Medium | Red | -40 to 200 | Steel | No | Yes | 9223K144 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 1" | 2 1/4" | 2 1/4" | Durometer 60A | Medium Hard | Black | -40 to 200 | Steel | No | Yes | 9546K446 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 1" | 2 1/4" | 2 1/4" | Durometer 85A | Hard | Red | -40 to 200 | Steel | No | Yes | 9546K57 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 1" | 2 1/4" | 2 1/4" | Durometer 95A | Extra Hard | Black | -40 to 200 | Steel | No | Yes | 9546K458 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Oil-Resistant Buna-N | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 1" | 2 1/4" | 2 1/4" | Durometer 40A | Medium Soft | White | -60 to 175 | Steel | Yes | No | 9546K467 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Fail-Safe Vibration-Damping Bolt-Down Mounts
 |
Threaded-Insert Mount |
Avoid the cost and hassle of a mount suddenly giving out. Even if the rubber fails, the interlocking steel body holds up to minimize downtime while you find a replacement. These mounts absorb shock and vibration to extend the life of heavy machinery and prevent cracking in nearby equipment, floors, and walls.
Threaded-Insert Mount
|
Multipurpose Neoprene—Resist wear and tear well enough for most applications. They won't break down when exposed to oil, grease, and gasoline, so they're a good choice for motors and pumps.
Base | Mounting | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Cap. per Mount, lb. | Deflection @ Cap. | Shear Cap. per Mount | Deflection @ Shear Cap. | Overall Ht. | Dia. | Lg. | Wd. | Temp. Range, ° F | Fasteners Included | No. of Holes | Hole Dia. | Hole Ctr.-to-Ctr. | Base Material | 1-24 | 25-99 | 100-Up | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Multipurpose Neoprene | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 900 | 0.13" | Not Rated | Not Rated | 1.84" | 3.1" | 6.41" | 4.09" | 10 to 180 | No | 2 | 0.53" | 5" | Steel | 64875K461 | 000000 | 000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 1,106 | 0.13" | Not Rated | Not Rated | 1.84" | 3.1" | 6.41" | 4.09" | 10 to 180 | No | 2 | 0.53" | 5" | Steel | 64875K462 | 00000 | 00000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 1,630 | 0.13" | Not Rated | Not Rated | 1.84" | 3.1" | 6.41" | 4.09" | 10 to 180 | No | 2 | 0.53" | 5" | Steel | 64875K463 | 00000 | 00000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 2,270 | 0.17" | Not Rated | Not Rated | 2.25" | 4.12" | 7.41" | 5.1" | 10 to 180 | No | 2 | 0.63" | 6" | Steel | 64875K481 | 00000 | 00000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 2,500 | 0.13" | Not Rated | Not Rated | 1.84" | 3.1" | 6.41" | 4.09" | 10 to 180 | No | 2 | 0.53" | 5" | Steel | 64875K464 | 00000 | 00000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 3,520 | 0.17" | Not Rated | Not Rated | 2.25" | 4.12" | 7.41" | 5.1" | 10 to 180 | No | 2 | 0.63" | 6" | Steel | 64875K482 | 00000 | 00000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 4,124 | 0.17" | Not Rated | Not Rated | 2.25" | 4.12" | 7.41" | 5.1" | 10 to 180 | No | 2 | 0.63" | 6" | Steel | 64875K483 | 00000 | 00000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 6,600 | 0.17" | Not Rated | Not Rated | 2.25" | 4.12" | 7.41" | 5.1" | 10 to 180 | No | 2 | 0.63" | 6" | Steel | 64875K484 | 00000 | 00000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Shock-Absorbing Swivel Leveling Mounts with Threaded Stud
Absorb sudden impacts from heavy machinery, such as punch presses, die cutters, and generators that jolt as they power on. These mounts have a solid rubber base, similar to a hockey puck, that isolates shock to protect floors and equipment from damage. The base also cuts down on noise and grips the floor so equipment doesn't slide when it's vibrating. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.
Vibration-Damping Rigid Leveling Mounts with Threaded Stud
 |
Style 1 |
The rubber base reduces vibration to protect components and extend your machine's life. The base also cuts down on noise, protects floors from scrapes and gouges, and grips surfaces so vibrating equipment doesn't slide. Install these mounts in threaded holes to level equipment on uneven floors. Use a locknut (not included) to install mounts in unthreaded through holes.
Vibration-Damping Swivel Leveling Mounts with Threaded Stud
 |
With Cushion |
A rubber cushion reduces vibration to protect components and extend your machine’s life. For mounting versatility, you can install them in either threaded holes or unthreaded through holes at the bottom of equipment.
304 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
Zinc-Yellow-Chromate-Plated Steel Base—More corrosion resistant than nickel-plated steel, these mounts are suitable for damp environments. However, they won’t hold up to chemical cleaners, high-pressure washdowns, and other harsh conditions like stainless steel can.
Plastic Cushion—The plastic bottom won't scratch or scuff floors when you’re moving equipment.
Rubber Cushion—In addition to reducing vibration, the cushion grips surfaces so vibrating equipment doesn't slide. It also cuts down on noise and protects floors from scrapes and gouges.
With Rubber Cushion | With Plastic Cushion | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Lg. | Swivel Range of Motion | Base Dia. | Cap. per Mount, lb. | Deflection @ Cap. | Overall Ht. | Cushion Material | Each | Cap. per Mount, lb. | Deflection @ Cap. | Overall Ht. | Cushion Material | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Zinc-Yellow-Chromate-Plated Steel Base and Stud | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 2" | 7.5° | 3" | 2,500 | 0.06" | 4 1/8" | Neoprene | 6330K31 | 000000 | 6,500 | 0.08" | 4 1/8" | Fiber-Reinforced Nylon | 6330K37 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
304 Stainless Steel Base and Stud | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 4" | 7.5° | 3 7/8" | 1,000 | 0.12" | 5 9/16" | Buna-N | 6221K13 | 00000 | — | — | — | — | ——— | 0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 4" | 7.5° | 3 7/8" | 2,000 | 0.12" | 5 9/16" | Buna-N | 6221K23 | 00000 | — | — | — | — | ——— | 0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 4" | 7.5° | 5 1/2" | 3,000 | 0.17" | 6 1/8" | Buna-N | 6221K75 | 000000 | — | — | — | — | ——— | 0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 4" | 7.5° | 5 1/2" | 4,000 | 0.17" | 6 1/8" | Buna-N | 6221K82 | 000000 | — | — | — | — | ——— | 0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 6" | 7.5° | 3 7/8" | 1,000 | 0.12" | 7 9/16" | Buna-N | 6221K53 | 00000 | — | — | — | — | ——— | 0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 6" | 7.5° | 3 7/8" | 2,000 | 0.12" | 7 9/16" | Buna-N | 6221K63 | 00000 | — | — | — | — | ——— | 0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 6" | 7.5° | 5 1/2" | 3,000 | 0.17" | 8 1/8" | Buna-N | 6221K76 | 000000 | — | — | — | — | ——— | 0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 6" | 7.5° | 5 1/2" | 4,000 | 0.17" | 8 1/8" | Buna-N | 6221K83 | 000000 | — | — | — | — | ——— | 0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 8" | 7.5° | 3 7/8" | 1,000 | 0.12" | 9 9/16" | Buna-N | 6221K138 | 00000 | — | — | — | — | ——— | 0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 8" | 7.5° | 3 7/8" | 2,000 | 0.12" | 9 9/16" | Buna-N | 6221K139 | 00000 | — | — | — | — | ——— | 0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 8" | 7.5° | 5 1/2" | 3,000 | 0.17" | 10 1/8" | Buna-N | 6221K14 | 000000 | — | — | — | — | ——— | 0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 8" | 7.5° | 5 1/2" | 4,000 | 0.17" | 10 1/8" | Buna-N | 6221K141 | 000000 | — | — | — | — | ——— | 0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 10" | 7.5° | 3 7/8" | 1,000 | 0.12" | 11 9/16" | Buna-N | 6221K142 | 000000 | — | — | — | — | ——— | 0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 10" | 7.5° | 3 7/8" | 2,000 | 0.12" | 11 9/16" | Buna-N | 6221K143 | 000000 | — | — | — | — | ——— | 0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 10" | 7.5° | 5 1/2" | 3,000 | 0.17" | 12 1/8" | Buna-N | 6221K144 | 000000 | — | — | — | — | ——— | 0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 10" | 7.5° | 5 1/2" | 4,000 | 0.17" | 12 1/8" | Buna-N | 6221K145 | 000000 | — | — | — | — | ——— | 0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Shock-Absorbing Swivel Leveling Mounts with Threaded Hole
Absorb sudden impacts from heavy machinery, such as punch presses, die cutters, and generators that jolt as they power on. These mounts have a solid rubber base, similar to a hockey puck, that isolates shock to protect floors and equipment from damage. The base also cuts down on noise and grips the floor so equipment doesn't slide when it's vibrating. Add your own stud to create a custom-length mount that levels equipment on uneven surfaces.
Vibration-Damping Rigid Leveling Mounts with Threaded Hole
 |
The rubber base reduces vibration to protect components and extend your machine's life. The base also cuts down on noise, protects floors from scrapes and gouges, and grips surfaces so vibrating equipment doesn't slide. Add your own stud to create a custom-length mount that levels equipment on uneven floors.
Stainless Steel Plate—These mounts have a stainless steel plate for excellent corrosion resistance.
Vibration-Damping Swivel Leveling Mounts with Threaded Hole
 |
With Cushion |
A rubber cushion reduces vibration to protect components and extend your machine’s life. These mounts have a ball-and-socket joint in the base that swivels to compensate for slightly sloped and pitted floors. Add your own stud to create a custom-length mount that you can install in either threaded holes or unthreaded through holes.
Zinc-Yellow-Chromate-Plated Steel Base—More corrosion resistant than nickel-plated steel, these mounts are suitable for damp environments. However, they won’t hold up to chemical cleaners, high-pressure washdowns, and other harsh conditions like stainless steel can.
Plastic Cushion—The plastic bottom won't scratch or scuff floors when you’re moving equipment.
Rubber Cushion—In addition to reducing vibration, the cushion grips surfaces so vibrating equipment doesn't slide. It also cuts down on noise and protects floors from scrapes and gouges.
With Rubber Cushion | With Plastic Cushion | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Dp. | Swivel Range of Motion | Base Dia. | Overall Ht. | Cap. per Mount, lb. | Deflection @ Cap. | Cushion Material | Each | Cap. per Mount, lb. | Deflection @ Cap. | Cushion Material | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Zinc-Yellow-Chromate-Plated Steel Base | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 9/16" | 7.5° | 3" | 2 1/8" | 2,500 | 0.06" | Neoprene | 6319K51 | 000000 | 6,500 | 0.08" | Fiber-Reinforced Nylon | 6319K57 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Stay-Put Sanitary Vibration-Damping Swivel Leveling Mounts with Threaded Stud
Free of crevices where bacteria can grow, these mounts have an extremely smooth finish, rounded edges, and a covered stud. A silicone seal at the base of the thread cover keeps contaminants out. The seal is made with chemical additives, so you can find it with an X-ray machine if it falls into your line. Mounts are certified by 3-A, EHEDG, and USDA to meet sanitary design standards. You can also bolt them down so machines don’t creep across the floor or tip over. The rubber cushion on the bottom reduces vibration to extend your machine’s life. In addition, the ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.
Two Mounting Holes
 |  |
With Cushion |
304 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
Rubber Cushion—In addition to reducing vibration, the cushion cuts down on noise and protects floors from scrapes and gouges.
Cap Nuts—Cover and protect exposed threads. These nuts are free of crevices where bacteria can grow and have a silicone seal to keep out contaminants. The seal is metal- and X-ray detectable in case it falls into your line.
Leveling Mounts | Cap Nuts | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mounting Holes | With Rubber Cushion | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Thread Size | Thread Lg. | Mounting Ht. | Swivel Range of Motion | Base Dia. | Fasteners Included | Dia. | Ctr.-to-Ctr. Lg. | Food Industry Std. | Cap. per Mount, lb. | Deflection @ Cap. | Overall Ht. | Cushion Material | Each | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
304 Stainless Steel Base and Stud | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 2 7/8" | 4" to 5 3/8" | 9° | 4 1/16" | No | 1/2" | 3 1/8" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 9,800 | Not Rated | 6 7/8" | Buna-N | 6903N22 | 0000000 | 97513A102 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 4 1/8" | 5 3/16" to 7 3/4" | 9° | 4 1/16" | No | 1/2" | 3 1/8" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 9,800 | Not Rated | 9 1/4" | Buna-N | 6903N23 | 000000 | 97513A102 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
One Offset Mounting Hole
 | |
With Cushion |
The mounting hole extends out from underneath your machine to give you more room to drill and install fasteners.
304 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
Rubber Cushion—In addition to reducing vibration, the cushion cuts down on noise and protects floors from scrapes and gouges.
Cap Nuts—Cover and protect exposed threads. These nuts are free of crevices where bacteria can grow and have a silicone seal to keep out contaminants. The seal is metal- and X-ray detectable in case it falls into your line.
Leveling Mounts | Cap Nuts | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mounting Holes | With Rubber Cushion | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Thread Size | Thread Lg. | Mounting Ht. | Swivel Range of Motion | Base Dia. | Fasteners Included | Dia. | Food Industry Std. | Cap. per Mount, lb. | Deflection @ Cap. | Overall Ht. | Cushion Material | Each | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
304 Stainless Steel Base and Stud | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 2 7/8" | 4 5/16" to 5 11/16" | 10° | 3 1/8" | No | 19/32" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 3,300 | Not Rated | 7 3/16" | Buna-N | 6903N13 | 000000 | 97513A102 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 2 7/8" | 4 5/16" to 5 11/16" | 10° | 4 1/8" | No | 19/32" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 4,900 | Not Rated | 7 3/16" | Buna-N | 6903N17 | 000000 | 97513A102 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 4 1/8" | 5 1/2" to 8 1/16" | 10° | 3 1/8" | No | 19/32" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 3,300 | Not Rated | 9 9/16" | Buna-N | 6903N14 | 00000 | 97513A102 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 4 1/8" | 5 1/2" to 8 1/16" | 10° | 4 1/8" | No | 19/32" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 4,900 | Not Rated | 9 9/16" | Buna-N | 6903N18 | 000000 | 97513A102 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Stay-Put Vibration-Damping Swivel Leveling Mounts with Threaded Stud
Bolt down machines so they don’t creep across the floor or tip over. These mounts have one or more holes for securing equipment that you don’t need to move. They also have a rubber cushion that reduces vibration to extend your machine’s life. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.
One Offset Mounting Hole
 |
With Cushion |
The mounting hole extends out from underneath your machine to give you more room to drill and install fasteners.
304 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
316 Stainless Steel Base—Our most corrosion-resistant metal mounts, these hold up in just about any environment. They won’t degrade or become pitted, even when exposed to harsh cleaners and chemicals.
Rubber Cushion—In addition to reducing vibration, the cushion cuts down on noise and protects floors from scrapes and gouges.
Mounting Holes | With Rubber Cushion | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Lg. | Swivel Range of Motion | Base Dia. | Fasteners Included | Dia. | Cap. per Mount, lb. | Deflection @ Cap. | Overall Ht. | Cushion Material | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
304 Stainless Steel Base and Stud | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 4" | 5° | 2 15/16" | No | 19/32" | 2,695 | Not Rated | 4 7/8" | Buna-N | 6221K312 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 4" | 5° | 3 15/16" | No | 19/32" | 3,145 | Not Rated | 5 1/4" | Buna-N | 6221K313 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 6" | 5° | 2 15/16" | No | 19/32" | 1,770 | Not Rated | 6 7/8" | Buna-N | 6221K19 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 6" | 5° | 3 15/16" | No | 19/32" | 2,220 | Not Rated | 7 1/4" | Buna-N | 6221K98 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
316 Stainless Steel Base and Stud | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 6" | 5° | 2 15/16" | No | 19/32" | 2,700 | Not Rated | 6 7/8" | Buna-N | 6810N17 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 6" | 5° | 3 15/16" | No | 19/32" | 3,150 | Not Rated | 7 1/4" | Buna-N | 6810N18 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Two Offset Mounting Holes
 |
With Cushion |
The mounting holes extend out from underneath your machine to give you more room to drill and install fasteners.
304 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
Rubber Cushion—In addition to reducing vibration, the cushion cuts down on noise and protects floors from scrapes and gouges.
Mounting Holes | With Rubber Cushion | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Thread Lg. | Swivel Range of Motion | Base Dia. | Fasteners Included | Dia. | Ctr.-to-Ctr. Lg. | Cap. per Mount, lb. | Deflection @ Cap. | Overall Ht. | Cushion Material | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
304 Stainless Steel Base and Stud | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 6" | 5° | 2 15/16" | No | 19/32" | 4 1/8" | 1,770 | Not Rated | 6 7/8" | Buna-N | 6221K924 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Vibration-Damping Bolt-Down Mounts
 |
Style 6, Threaded-Insert Mount |
These mounts reduce vibration and noise while anchoring machinery from below. Bolt them to the bases of fans, pumps, and generators so vibration from moving components doesn't wear out parts, crack floors, and push equipment out of place.
Style 6—Threaded-Insert Mount
|
Style 6, Threaded-Insert Mount |
In addition to high load capacities, the wide, rigid mounting surface minimizes leaning and wobbling.
Multipurpose Neoprene—Resist wear and tear well enough for most applications. They won't break down when exposed to oil, grease, and gasoline, so they're a good choice for motors and pumps.
Base | Mounting | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Cap. per Mount, lb. | Deflection @ Cap. | Shear Cap. per Mount | Deflection @ Shear Cap. | Overall Ht. | Dia. | Lg. | Wd. | Temp. Range, ° F | Fasteners Included | No. of Holes | Hole Dia. | Hole Ctr.-to-Ctr. | Base Material | 1-24 | 25-99 | 100-Up | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Multipurpose Neoprene | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 700 | 0.25" | Not Rated | Not Rated | 1.5" | 3.125" | 5.125" | 3" | -20 to 180 | No | 2 | 0.44" | 4.125" | Steel | 67555K413 | 000000 | 000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 1,000 | 0.25" | Not Rated | Not Rated | 1.5" | 3.125" | 5.125" | 3" | -20 to 180 | No | 2 | 0.44" | 4.125" | Steel | 67555K412 | 00000 | 00000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 1,500 | 0.25" | Not Rated | Not Rated | 1.5" | 3.125" | 5.125" | 3" | -20 to 180 | No | 2 | 0.44" | 4.125" | Steel | 67555K411 | 00000 | 00000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Easy-Install Vibration-Damping Rigid Leveling Mounts with Threaded Stud
 |
Style 1 |
A two-piece design requires less clearance to install than one-piece mounts. Install these mounts in threaded holes to level equipment on uneven floors. Use a locknut (not included) to install mounts in unthreaded through holes. A rubber cushion reduces vibration to protect components and extend your machine’s life.
Steel Base—These mounts are best for dry environments since moisture will cause them to rust.
Rubber Cushion—In addition to reducing vibration, the cushion grips surfaces so vibrating equipment doesn't slide. It also cuts down on noise and protects floors from scrapes and gouges.
Sanitary Vibration-Damping Swivel Leveling Mounts with Threaded Stud
 |
With Cushion |
|
With an extremely smooth finish, rounded edges, and a covered stud, these mounts are free of crevices where bacteria can grow. They have a silicone seal at the base of the thread cover that keeps contaminants out. The seal is made with chemical additives, so you can find it with an X-ray machine if it falls into your line. Mounts are certified by 3-A, EHEDG, and USDA to meet sanitary design standards. They also have a rubber cushion that reduces vibration to extend your machine’s life. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.
304 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
Rubber Cushion—In addition to reducing vibration, the cushion grips surfaces so vibrating equipment doesn't slide. It also cuts down on noise and protects floors from scrapes and gouges.
Cap Nuts—Cover and protect exposed threads. These nuts are free of crevices where bacteria can grow and have a silicone seal to keep out contaminants. The seal is metal- and X-ray detectable in case it falls into your line.
Leveling Mounts | Cap Nuts | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
With Rubber Cushion | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Thread Size | Thread Lg. | Mounting Ht. | Swivel Range of Motion | Base Dia. | Food Industry Std. | Cap. per Mount, lb. | Deflection @ Cap. | Overall Ht. | Cushion Material | Each | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
304 Stainless Steel Base and Stud | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 3 3/8" | 4 1/8" to 5 1/2" | 10° | 2 9/16" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 2,000 | Not Rated | 7" | Buna-N | 3356K4 | 000000 | 97513A102 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 3 3/8" | 4 3/8" to 5 11/16" | 10° | 3 3/16" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 3,300 | Not Rated | 7 1/4" | Buna-N | 3356K9 | 00000 | 97513A102 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 3 3/8" | 4 3/8" to 5 11/16" | 10° | 4 1/8" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 4,900 | Not Rated | 7 1/4" | Buna-N | 3356K21 | 00000 | 97513A102 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 3/4"-10 | 4 1/2" | 5 1/2" to 8 1/16" | 10° | 3 3/16" | 3-A Certified 88-00, FDA Compliant 21 CFR 177.2600 | 3,300 | Not Rated | 9 9/16" | Buna-N | 3356K13 | 00000 | 97513A102 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
