M10 Bumpers | McMaster-Carr

Filter by

System of Measurement

Height

Thread Pitch

Mount Type

Hardness Rating

Shape

Load

1,000 lb. to 1,999 lb.

2,000 lb. to 2,999 lb.

Thread Length

Material

Hardness

Color

Performance

Low Frequency Vibration Damping

Stud Material

Diameter

For Use Outdoors

Minimum Temperature

RoHS

Compliant with Exemptions

Not Compliant

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

REACH

Maximum Temperature

Overall Height

Nonmarking

101 Products

Load-Rated Reinforced Threaded-Stud Bumpers


Style 1	Style 2	Style 7

Tested to support the load of your application. These bumpers support a wide range of equipment—from a 50 lb. saw to a 5,000 lb. air compressor. They also help reduce vibration and protect whatever they’re mounted to. All have a metal base plate for added strength and a longer service life than all-rubber bumpers. No separate fasteners are needed—just twist them into a threaded hole.

Natural Rubber with Steel Stud and Base Plate


Style 1	Style 2

These bumpers absorb impact well enough for most applications. However, they're not for use outdoors and break down when exposed to oil and harsh chemicals.

Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.

	Thread
	Size	Lg., mm	OD, mm	Ht., mm	Max. Load, lb.	Deflection @ Cap.	Hardness	Hardness Rating	Color	Temp., ° F	Nonmarking	For Use Outdoors		Each
Style 1



		M10 × 1.5 mm	27	70	30	1,610	0.3"	Durometer 55A	Medium	Black	-40 to 170	No	No	3810N161	000000


		M10 × 1.5 mm	27	70	30	2,930	0.3"	Durometer 70A	Hard	Black	-40 to 170	No	No	3810N162	00000
		M10 × 1.5 mm	27	70	40	1,410	0.39"	Durometer 50A	Medium	Black	-10 to 150	No	No	93115K971	00000
		M10 × 1.5 mm	27	70	55	1,290	0.54"	Durometer 50A	Medium	Black	-10 to 150	No	No	93115K972	00000
		M10 × 1.5 mm	28	50	20	770	0.2"	Durometer 50A	Medium	Black	-10 to 150	No	No	93115K961	0000
		M10 × 1.5 mm	28	50	20	1,670	0.2"	Durometer 70A	Hard	Black	-40 to 170	No	No	3810N15	0000
		M10 × 1.5 mm	28	50	30	560	0.3"	Durometer 50A	Medium	Black	-10 to 150	No	No	93115K962	0000
		M10 × 1.5 mm	28	50	30	1,210	0.3"	Durometer 70A	Hard	Black	-40 to 170	No	No	3810N151	0000
		M10 × 1.5 mm	28	50	40	620	0.39"	Durometer 50A	Medium	Black	-10 to 150	No	No	93115K963	0000
		M10 × 1.5 mm	28	50	40	1,110	0.39"	Durometer 70A	Hard	Black	-40 to 170	No	No	3810N152	0000
		M10 × 1.5 mm	28	50	50	600	0.49"	Durometer 55A	Medium	Black	-40 to 170	No	No	3810N153	0000


		M10 × 1.5 mm	28	50	50	940	0.49"	Durometer 70A	Hard	Black	-40 to 170	No	No	3810N154	0000
		M10 × 1.5 mm	28	60	20	860	0.2"	Durometer 55A	Medium	Black	-40 to 170	No	No	3810N155	0000
		M10 × 1.5 mm	28	60	40	790	0.39"	Durometer 55A	Medium	Black	-40 to 170	No	No	3810N157	00000
		M10 × 1.5 mm	28	60	60	1,820	0.59"	Durometer 70A	Hard	Black	-40 to 170	No	No	3810N16	00000


		Style 2



				M10 × 1.5 mm	28	50	50	210	0.49"	Durometer 55A	Medium	Black	-40 to 170	No	No	3810N193	0000


				M10 × 1.5 mm	28	50	50	250	0.49"	Durometer 70A	Hard	Black	-40 to 170	No	No	3810N194	0000
				M10 × 1.5 mm	28	50	68	200	0.67"	Durometer 50A	Medium	Black	-10 to 150	No	No	9377K83	00000
				M10 × 1.5 mm	28	50	68	430	0.67"	Durometer 70A	Hard	Black	-40 to 170	No	No	3810N196	00000

Natural Rubber with Corrosion-Resistant Stainless Steel Stud and Base Plate

Style 1

These bumpers absorb impact well enough for most applications. However, they're not for use outdoors and break down when exposed to oil and harsh chemicals.

Unlike bumpers with steel studs, these handle repeated washdowns without corroding.

	Thread
	Size	Lg., mm	OD, mm	Ht., mm	Max. Load, lb.	Deflection @ Cap.	Hardness	Hardness Rating	Color	Temp., ° F	Nonmarking	For Use Outdoors		Each
Style 1



		M10 × 1.5 mm	27	70	30	1,610	0.3"	Durometer 55A	Medium	Black	-40 to 170	No	No	4720N13	000000


		M10 × 1.5 mm	28	50	20	770	0.2"	Durometer 50A	Medium	Black	-10 to 150	No	No	93115K964	00000
		M10 × 1.5 mm	28	50	30	560	0.3"	Durometer 50A	Medium	Black	-10 to 150	No	No	93115K965	00000
		M10 × 1.5 mm	28	50	40	620	0.39"	Durometer 50A	Medium	Black	-10 to 150	No	No	93115K966	00000
		M10 × 1.5 mm	28	50	50	600	0.49"	Durometer 55A	Medium	Black	-40 to 170	No	No	4720N126	00000
		M10 × 1.5 mm	28	60	20	860	0.2"	Durometer 55A	Medium	Black	-40 to 170	No	No	4720N127	00000

Multipurpose Neoprene with Steel Stud and Base Plate

Style 1

A good choice for oily equipment that's exposed to sunlight, rain, and ozone. These aren't as oil resistant as Buna-N bumpers, but they can be used outdoors.

	Thread
	Size	Lg., mm	OD, mm	Ht., mm	Max. Load, lb.	Deflection @ Cap.	Hardness	Hardness Rating	Color	Temp., ° F	Nonmarking	For Use Outdoors		Each
Style 1



		M10 × 1.5 mm	29	51	19	310	0.08"	Durometer 40A	Medium Soft	Black	10 to 180	Yes	Yes	9377K218	00000


		M10 × 1.5 mm	29	51	19	560	0.08"	Durometer 70A	Hard	Black	10 to 180	Yes	Yes	9377K227	0000

Oil-Resistant Buna-N with Steel Stud and Base Plate

Style 7

These bumpers resist oil and fuels better than other rubber bumpers. Use them on frequently lubricated machinery and oily equipment, such as engines and pumps.

	Thread
	Size	Lg., mm	OD, mm	Ht.	Max. Load, lb.	Deflection @ Cap.	Hardness	Hardness Rating	Color	Temp., ° F	Nonmarking	For Use Outdoors		Each
Style 7



		M10 × 1.5 mm	40	50	1 11/16"	360	0.41"	Durometer 55A	Medium	Black	-20 to 170	No	No	5104N144	000000

Oil-Resistant Buna-N with Corrosion-Resistant Stainless Steel Stud and Base Plate

Style 7

These bumpers resist oil and fuels better than other rubber bumpers. Use them on frequently lubricated machinery and oily equipment, such as engines and pumps.

Unlike bumpers with steel studs, these handle repeated washdowns without corroding.

	Thread
	Size	Lg., mm	OD, mm	Ht.	Max. Load, lb.	Deflection @ Cap.	Hardness	Hardness Rating	Color	Temp., ° F	Nonmarking	For Use Outdoors		Each
Style 7



		M10 × 1.5 mm	40	50	1 11/16"	360	0.41"	Durometer 55A	Medium	Black	-20 to 170	No	No	9001N135	000000

Reinforced Threaded-Hole Bumpers

Style 1

With a metal base plate for added strength, these bumpers withstand repeated impacts for a longer service life than all-rubber bumpers. You can also use them as spacers and noise reducers. Twist them onto a threaded stud on your equipment, or pair them with your own stud to create a custom-length bumper.

Multipurpose Neoprene About Multipurpose Neoprene

Style 1

A good choice for oily equipment that's exposed to sunlight, rain, and ozone. These aren't as oil resistant as Buna-N bumpers, but they can be used outdoors.

	Thread
	Size	Dp., mm	OD, mm	Ht., mm	Hardness	Hardness Rating	Color	Temp., ° F	Base Plate Material	Nonmarking	For Use Outdoors		Each
Style 1



		M10 × 1.25 mm	13	32	32	Durometer 40A	Medium Soft	Black	-40 to 200	Steel	No	Yes	9546K219	000000


		M10 × 1.25 mm	13	32	32	Durometer 75A	Hard	Black	-40 to 200	Steel	No	Yes	9546K547	00000
		M10 × 1.5 mm	13	32	32	Durometer 70A	Hard	Black	-40 to 200	Steel	No	Yes	9546K474	00000

Abrasion-Resistant Polyurethane Rubber About Abrasion-Resistant Polyurethane Rubber

Style 1

Our toughest rubber bumpers, they keep their shape even when knocked and scraped by metal and other abrasive materials. They're often used on industrial vehicles, conveyors, and heavy construction equipment.

	Thread
	Size	Dp., mm	OD, mm	Ht., mm	Hardness	Hardness Rating	Color	Temp., ° F	Base Plate Material	Nonmarking	For Use Outdoors		Each
Style 1



		M10 × 1.25 mm	13	32	32	Durometer 30A	Soft	Red	-40 to 200	Steel	No	Yes	9223K126	000000


		M10 × 1.25 mm	13	32	32	Durometer 40A	Medium Soft	Red	-40 to 200	Steel	No	Yes	9223K24	00000
		M10 × 1.25 mm	13	32	32	Durometer 50A	Medium	Red	-40 to 200	Steel	No	Yes	9223K153	00000
		M10 × 1.25 mm	13	32	32	Durometer 60A	Medium Hard	Red	-40 to 200	Steel	No	Yes	9223K168	00000
		M10 × 1.25 mm	13	32	32	Durometer 85A	Hard	Red	-40 to 200	Steel	No	Yes	9546K221	00000
		M10 × 1.5 mm	13	32	32	Durometer 40A	Medium Soft	Black	-40 to 200	Steel	No	Yes	9546K481	00000
		M10 × 1.5 mm	13	32	32	Durometer 95A	Extra Hard	Black	-40 to 200	Steel	No	Yes	9546K487	00000

Reinforced Threaded-Stud Bumpers with Steel Core

Style 1

Our most durable and impact-resistant bumpers. With a steel core, they withstand repeated impacts for a longer service life than all-rubber bumpers. You can also use them as spacers and noise reducers. No separate fasteners are needed—just twist them into a threaded hole.

Multipurpose Neoprene About Multipurpose Neoprene

Style 1

A good choice for oily equipment that's exposed to sunlight, rain, and ozone. These aren't as oil resistant as Buna-N bumpers, but they can be used outdoors.

	Thread
	Size	Lg., mm	OD, mm	Ht., mm	Overall Ht., mm	Hardness	Hardness Rating	Color	Temp., ° F	Stud Material	Nonmarking	For Use Outdoors		Each
Style 1



		M10 × 1.5 mm	15	32	32	47	Durometer 40A	Medium Soft	Black	-40 to 200	Steel	Yes	Yes	9546K251	000000


		M10 × 1.5 mm	15	32	32	47	Durometer 75A	Hard	Black	-40 to 200	Steel	Yes	Yes	9546K534	00000
		M10 × 1.5 mm	30	32	32	62	Durometer 40A	Medium Soft	Black	-40 to 200	Steel	Yes	Yes	9546K243	00000
		M10 × 1.5 mm	30	32	32	62	Durometer 75A	Hard	Black	-40 to 200	Steel	Yes	Yes	9546K535	00000

Abrasion-Resistant Polyurethane Rubber About Abrasion-Resistant Polyurethane Rubber

Style 1

	Thread
	Size	Lg., mm	OD, mm	Ht., mm	Overall Ht., mm	Hardness	Hardness Rating	Color	Temp., ° F	Stud Material	Nonmarking	For Use Outdoors		Each
Style 1



		M10 × 1.5 mm	15	32	32	47	Durometer 80A	Hard	Red	-60 to 200	Steel	Yes	Yes	9546K262	000000


		M10 × 1.5 mm	30	32	32	62	Durometer 40A	Medium Soft	Red	-60 to 200	Steel	Yes	Yes	9223K36	00000
		M10 × 1.5 mm	30	32	32	62	Durometer 80A	Hard	Red	-60 to 200	Steel	Yes	Yes	9546K244	00000

Load-Rated Reinforced Threaded-Hole Bumpers


Style 1	Style 2

Tested to ensure they’ll bear the weight of your application, these bumpers support everything from a 50-pound saw to a 2,000-pound air compressor. They also help reduce vibration and protect whatever they're mounted to. All have a metal base plate for added strength and a longer life than all-rubber bumpers. Twist them onto a threaded stud on your equipment, or pair them with your own stud to create a custom-length bumper.

Natural Rubber with Steel Base Plate


Style 1	Style 2

These bumpers absorb impact well enough for most applications. However, they're not for use outdoors and break down when exposed to oil and harsh chemicals.

	Thread
	Size	Dp., mm	OD, mm	Ht., mm	Max. Load, lb.	Deflection @ Cap.	Hardness	Hardness Rating	Color	Temp., ° F	Nonmarking	For Use Outdoors		Each
Style 1



		M10 × 1.5 mm	10	50	20	600	0.2"	Durometer 40A	Medium Soft	Black	-40 to 170	Yes	No	9377K363	00000


		M10 × 1.5 mm	10	50	20	770	0.2"	Durometer 55A	Medium	Black	-20 to 150	Yes	No	93115K591	0000
		M10 × 1.5 mm	10	50	20	1,670	0.2"	Durometer 70A	Hard	Black	-40 to 170	Yes	No	9377K364	0000
		M10 × 1.5 mm	10	50	30	400	0.3"	Durometer 40A	Medium Soft	Black	-40 to 170	Yes	No	9377K365	0000
		M10 × 1.5 mm	10	50	30	560	0.3"	Durometer 55A	Medium	Black	-20 to 150	Yes	No	93115K611	0000
		M10 × 1.5 mm	10	50	30	1,210	0.3"	Durometer 70A	Hard	Black	-40 to 170	Yes	No	9377K366	0000
		M10 × 1.5 mm	10	50	40	620	0.39"	Durometer 55A	Medium	Black	-20 to 150	Yes	No	93115K681	0000
		M10 × 1.5 mm	10	50	40	1,110	0.39"	Durometer 70A	Hard	Black	-40 to 170	Yes	No	9377K368	0000
		M10 × 1.5 mm	10	60	30	720	0.3"	Durometer 40A	Medium Soft	Black	-40 to 170	Yes	No	9377K373	00000
		M10 × 1.5 mm	10	60	30	1,200	0.3"	Durometer 55A	Medium	Black	-40 to 170	Yes	No	9377K374	00000
		M10 × 1.5 mm	10	70	30	1,610	0.3"	Durometer 55A	Medium	Black	-40 to 170	Yes	No	9377K384	00000


		M10 × 1.5 mm	10	70	40	1,410	0.39"	Durometer 55A	Medium	Black	-20 to 150	Yes	No	93115K691	00000
		M10 × 1.5 mm	10	70	55	1,290	0.54"	Durometer 55A	Medium	Black	-20 to 150	Yes	No	93115K761	00000


		Style 2



				M10 × 1.5 mm	10	50	68	200	0.67"	Durometer 55A	Medium	Black	-20 to 150	Yes	No	9377K76	00000


				M10 × 1.5 mm	10	50	68	430	0.67"	Durometer 70A	Hard	Black	-40 to 170	Yes	No	9377K479	00000

Natural Rubber with Corrosion-Resistant Stainless Steel Base Plate

Style 1

These bumpers absorb impact well enough for most applications. However, they're not for use outdoors and break down when exposed to oil and harsh chemicals.

Unlike bumpers with a steel base plate, these stand up to repeated washdowns without corroding.

	Thread
	Size	Dp., mm	OD, mm	Ht., mm	Max. Load, lb.	Deflection @ Cap.	Hardness	Hardness Rating	Color	Temp., ° F	Nonmarking	For Use Outdoors		Each
Style 1



		M10 × 1.5 mm	10	50	20	770	0.2"	Durometer 55A	Medium	Black	-20 to 150	Yes	No	93115K592	000000


		M10 × 1.5 mm	10	50	30	560	0.3"	Durometer 55A	Medium	Black	-20 to 150	Yes	No	93115K612	00000
		M10 × 1.5 mm	10	50	40	620	0.39"	Durometer 55A	Medium	Black	-20 to 150	Yes	No	93115K682	00000
		M10 × 1.5 mm	10	50	50	600	0.49"	Durometer 55A	Medium	Black	-40 to 170	Yes	No	9377K433	00000

Vibration-Damping Sandwich Mounts with Studs

Install these mounts between two holes inside or under equipment. Our jack-of-all-trades option, they isolate vibration to protect circuit boards, air compressors, and everything in between. They also muffle noise so you can work or hold a conversation around buzzing and thumping machinery.

Natural Rubber About Natural Rubber

Image of Product. Front orientation. Vibration-Damping Mounts. Vibration-Damping Sandwich Mounts with Studs.

The most common choice, these mounts won't scuff or tear easily. They stay strong and flexible even under constant vibration and repeated movement.

Corrosion-Resistant 304 Stainless Steel Stud—Last longer than steel when exposed to water and mild chemicals.

													Each
	Thread Size	Cap. per Mount, lb.	Deflection @ Cap.	Shear Cap. per Mount, lb.	Deflection @ Shear Cap.	Ht.	Dia.	Thread Lg.	Hardness	Temp. Range, ° F	Color		1-24	25-99	100-Up
Zinc-Plated Steel Stud



		M10 × 1.5 mm	125	0.1"	20	0.15"	1"	1 9/16"	5/8"	Durometer 50A	-10 to 150	Black	9217K53	00000	00000	00000


		M10 × 1.5 mm	165	0.16"	55	0.2"	1 5/8"	2"	5/8"	Durometer 50A	-10 to 150	Black	9217K55	00000	00000	00000
		M10 × 1.5 mm	180	0.14"	46	0.2"	1 3/8"	2"	5/8"	Durometer 50A	-10 to 150	Black	9217K72	00000	00000	00000
		M10 × 1.5 mm	370	0.08"	90	0.15"	3/4"	2"	1 1/8"	Durometer 50A	-10 to 150	Black	9217K54	00000	0000	0000
		M10 × 1.5 mm	375	0.06"	85	0.16"	5/8"	1 9/16"	5/8"	Durometer 50A	-10 to 150	Black	9217K71	0000	0000	0000
		M10 × 1.5 mm	560	0.09"	160	0.25"	7/8"	2 1/2"	1 1/8"	Durometer 50A	-10 to 150	Black	9217K64	00000	00000	00000


		Corrosion-Resistant 304 Stainless Steel Stud



				M10 × 1.5 mm	220	0.22"	35	0.22"	1 1/16"	1 9/16"	1"	Durometer 50A	-10 to 150	Black	5823K46	00000	00000	00000


				M10 × 1.5 mm	450	0.3"	Not Rated	Not Rated	1 3/16"	2"	1 1/8"	Durometer 55A	-10 to 150	Black	9213K261	00000	00000	00000
				M10 × 1.5 mm	660	0.16"	55	0.16"	3/4"	2"	1"	Durometer 50A	-10 to 150	Black	5823K47	00000	00000	00000

Multipurpose Neoprene About Multipurpose Neoprene

Resist wear and tear well enough for most applications. They are UV resistant and won't break down when exposed to oil, grease, and gasoline, so they're a good choice for motors and pumps.

													Each
	Thread Size	Cap. per Mount, lb.	Deflection @ Cap.	Shear Cap. per Mount, lb.	Deflection @ Shear Cap.	Ht.	Dia.	Thread Lg.	Hardness	Temp. Range, ° F	Color		1-24	25-99	100-Up
Zinc-Plated Steel Stud



		M10 × 1.5 mm	125	0.1"	20	0.15"	1"	1 9/16"	5/8"	Durometer 50A	10 to 180	Black	9225K83	00000	00000	00000


		M10 × 1.5 mm	165	0.16"	55	0.2"	1 5/8"	2"	5/8"	Durometer 50A	10 to 180	Black	9225K85	00000	00000	00000
		M10 × 1.5 mm	180	0.14"	46	0.2"	1 3/8"	2"	5/8"	Durometer 50A	10 to 180	Black	9225K32	00000	00000	00000
		M10 × 1.5 mm	370	0.08"	90	0.15"	3/4"	2"	1 1/8"	Durometer 50A	10 to 180	Black	9225K84	00000	00000	0000
		M10 × 1.5 mm	375	0.06"	85	0.16"	5/8"	1 9/16"	5/8"	Durometer 50A	10 to 180	Black	9225K31	0000	0000	0000
		M10 × 1.5 mm	560	0.09"	160	0.25"	7/8"	2 1/2"	1 1/8"	Durometer 50A	10 to 180	Black	9225K94	00000	00000	00000

Vibration-Damping Sandwich Mounts with Stud and Insert

Install these mounts between a threaded stud and a hole inside or under equipment. Our jack-of-all-trades option, they isolate vibration to protect circuit boards, air compressors, and everything in between. They also muffle noise so you can work or hold a conversation around buzzing and thumping machinery.

Natural Rubber About Natural Rubber

Image of Product. Front orientation. Vibration-Damping Mounts. Vibration-Damping Sandwich Mounts with Stud and Insert.

The most common choice, these mounts won't scuff or tear easily. They stay strong and flexible even under constant vibration and repeated movement.

Corrosion-Resistant 304 Stainless Steel Insert—Last longer than steel when exposed to water and mild chemicals.

								Thread						Each
	Thread Size	Cap. per Mount, lb.	Deflection @ Cap.	Shear Cap. per Mount, lb.	Deflection @ Shear Cap.	Ht.	Dia.	Lg.	Dp.	Hardness	Temp. Range, ° F	Color		1-24	25-99	100-Up
Zinc-Plated Steel Stud and Steel Insert



		M10 × 1.5 mm	125	0.1"	20	0.15"	1"	1 9/16"	5/8"	1/4"	Durometer 50A	-10 to 150	Black	9232K72	00000	00000	00000


		M10 × 1.5 mm	165	0.16"	55	0.2"	1 5/8"	2"	5/8"	3/8"	Durometer 50A	-10 to 150	Black	9232K61	00000	00000	00000
		M10 × 1.5 mm	165	0.2"	45	0.2"	2"	2"	1 1/8"	3/8"	Durometer 50A	-10 to 150	Black	9232K62	00000	00000	00000
		M10 × 1.5 mm	190	0.14"	50	0.2"	1 3/8"	2"	5/8"	3/8"	Durometer 50A	-10 to 150	Black	9232K52	00000	00000	00000
		M10 × 1.5 mm	375	0.06"	85	0.16"	5/8"	1 9/16"	5/8"	1/4"	Durometer 50A	-10 to 150	Black	9232K71	0000	0000	0000


		Corrosion-Resistant 304 Stainless Steel Stud and Insert



				M10 × 1.5 mm	385	0.16"	44	0.16"	13/16"	2 15/16"	1 1/2"	3/8"	Durometer 50A	-10 to 150	Black	5823K766	00000	00000	00000

Multipurpose Neoprene About Multipurpose Neoprene

Resist wear and tear well enough for most applications. They are UV resistant and won't break down when exposed to oil, grease, and gasoline, so they're a good choice for motors and pumps.

								Thread						Each
	Thread Size	Cap. per Mount, lb.	Deflection @ Cap.	Shear Cap. per Mount, lb.	Deflection @ Shear Cap.	Ht.	Dia.	Lg.	Dp.	Hardness	Temp. Range, ° F	Color		1-24	25-99	100-Up
Zinc-Plated Steel Stud and Steel Insert



		M10 × 1.5 mm	125	0.1"	20	0.15"	1"	1 9/16"	5/8"	1/4"	Durometer 50A	10 to 180	Black	9241K32	00000	00000	00000


		M10 × 1.5 mm	165	0.16"	55	0.2"	1 5/8"	2"	5/8"	3/8"	Durometer 50A	10 to 180	Black	9241K51	00000	00000	00000
		M10 × 1.5 mm	165	0.2"	45	0.2"	2"	2"	1 1/8"	3/8"	Durometer 50A	10 to 180	Black	9241K52	00000	00000	00000
		M10 × 1.5 mm	190	0.14"	50	0.2"	1 3/8"	2"	5/8"	3/8"	Durometer 50A	10 to 180	Black	9241K72	00000	00000	00000
		M10 × 1.5 mm	375	0.06"	85	0.16"	5/8"	1 9/16"	5/8"	1/4"	Durometer 50A	10 to 180	Black	9241K31	0000	0000	0000

Vibration-Damping Sandwich Mounts with Inserts

Install these mounts between studs inside or under equipment. Our jack-of-all-trades option, they isolate vibration to protect circuit boards, air compressors, and everything in between. They also muffle noise so you can work or hold a conversation around buzzing and thumping machinery. With reinforcing metal bonded to the rubber, they'll support weight when mounted underneath equipment (Cap. per Mount).

Natural Rubber About Natural Rubber

Image of Product. Bottom orientation. Vibration-Damping Mounts. Vibration-Damping Sandwich Mounts with Inserts.

The most common choice, these mounts won't scuff or tear easily. They stay strong and flexible even under constant vibration and repeated movement.

Corrosion-Resistant 304 Stainless Steel-Insert—Last longer than steel when exposed to water and mild chemicals.

												Each
	Thread Size	Cap. per Mount, lb.	Deflection @ Cap.	Shear Cap. per Mount, lb.	Deflection @ Shear Cap.	Ht.	Dia.	Thread Dp.	Temp. Range, ° F	Color		1-24	25-99	100-Up
Steel-Insert



		M10 × 1.5 mm	165	0.16"	55	0.2"	1 5/8"	2"	3/8"	-10 to 150	Black	9247K36	000000	000000	00000


		M10 × 1.5 mm	190	0.14"	50	0.2"	1 3/8"	2"	3/8"	-10 to 150	Black	9247K52	00000	00000	00000


		Corrosion-Resistant 304 Stainless Steel-Insert



				M10 × 1.5 mm	275	0.22"	35	0.22"	1"	1 1/2"	3/8"	-10 to 150	Black	5823K817	00000	00000	00000

Multipurpose Neoprene About Multipurpose Neoprene

Resist wear and tear well enough for most applications. They are UV resistant and won't break down when exposed to oil, grease, and gasoline, so they're a good choice for motors and pumps.

												Each
	Thread Size	Cap. per Mount, lb.	Deflection @ Cap.	Shear Cap. per Mount, lb.	Deflection @ Shear Cap.	Ht.	Dia.	Thread Dp.	Temp. Range, ° F	Color		1-24	25-99	100-Up
Steel-Insert



		M10 × 1.5 mm	165	0.16"	55	0.2"	1 5/8"	2"	3/8"	10 to 180	Black	9254K46	00000	00000	00000


		M10 × 1.5 mm	190	0.14"	50	0.2"	1 3/8"	2"	3/8"	10 to 180	Black	9254K52	00000	00000	00000
		M10 × 1.5 mm	430	0.14"	115	0.2"	1 3/8"	2"	3/8"	10 to 180	Black	9254K48	00000	00000	00000

Self-Adjusting Shock Absorbers

Accommodate changing loads and energy without manual adjustment. Shock absorbers counteract the energy of moving objects to prevent damage to equipment and material. They're often used in gantry systems, presses, and at stops along conveyors. Mounting nuts are included. Mounting Blocks for Shock Absorbers are sold separately.

Threaded-Body Mount


Urethane Rubber Bumper	Steel Bumper

Urethane Rubber Bumper—Urethane rubber bumpers are nonmarring.

					Body			Rod		Bumper
Energy Cap., in·lbf	Max. Cycles per min., cpm	Stroke Lg.	Extended Lg.	Compressed Lg.	Dia.	Thread Size	Material	Dia.	Material	Dia.	Material	Temp. Range, ° F		Each



	20	167	0.26"	2.27"	2.01"	0.39"	M10 × 1 mm	Black-Oxide Steel	0.13"	Stainless Steel	0.3"	Steel	32 to 150	3692K15	000000


	35	63	0.31"	2.24"	1.93"	0.39"	M10 × 1 mm	Black-Oxide Steel	0.1"	Chrome-Plated Steel	0.34"	Urethane Rubber	14 to 176	6528K512	00000

Shock-Absorbing Air Spring Vibration-Damping Mounts

Neutralize shock and vibration from your machine no matter how hard it heaves or hammers. These mounts use air pressure rather than a steel frame to support a load. That means four times the deflection and vibration control of a typical bolt-down mount. Fill them with air and stick them under heavy machinery to keep floors intact, seals tight, and fasteners secure. They’ll also soak up the vibration from floors and mounting plates that bumps optical and other precision tools out of alignment.

Threaded-Insert Mount

Image of Product. Front orientation. Vibration-Damping Mounts. Shock-Absorbing Air Spring Vibration-Damping Mounts.

									Base			Mounting					Air Inlet
	Thread Size	Cap. per Mount, lb.	Deflection @ Cap.	Shear Cap. per Mount	Deflection @ Shear Cap.	Overall Ht.	Dia.	Ht.	Lg.	Wd.	Temp. Range, ° F	Fasteners Included	No. of Holes	Hole Dia.	Hole Ctr.-to-Ctr.	Max. Pressure, psi	Thread Size	Thread Type		Each
Multipurpose Neoprene



		M10 × 1.5 mm	100	0.5"	Not Rated	Not Rated	2.5"	2.89"	1.94"	3"	3"	-20 to 180	No	4	0.3"	2.38"	85	0.305"-32	Schrader	62075K31	000000

Threaded-Stud Bumpers

Style 1

These bumpers absorb impact to protect equipment, walls, and floors from dents and scuffs. They're found everywhere from access panels to the bases of equipment. The rubber construction also stifles noise and absorbs vibration to prevent wear and tear to your machinery and nearby surfaces. No separate fasteners are needed—just twist them into a threaded hole.

Multipurpose SBR Rubber About Multipurpose SBR Rubber

Style 1

These bumpers absorb impact well enough for most applications. However, they're not for use outdoors and break down when exposed to oil and harsh chemicals.

	Thread
	Size	Lg.	OD	Ht.	Hardness	Hardness Rating	Color	Temp., ° F	Stud Material	Nonmarking	For Use Outdoors	Pkg. Qty.		Pkg.
Style 1



		M10 × 1.5 mm	1/2"	1"	3/4"	Durometer 70A	Hard	Black	-20 to 180	Steel	No	No	5	8687N32	000000