We will reply to your message within an hour.
Bundle cables outdoors with these ties that withstand exposure to UV rays and water.
The hook and loop on these ties holds more tightly than other hook and loop.
Ties are made from heat-resistant fabric to withstand high temperatures.
The buckle allows you to cinch these ties tight.
These ties stretch to hold material tightly without slipping.
Take the guesswork out of identifying material—use the attached tag to label the bundle.
These cable ties are easy to yank apart or cinch shut, even when wearing gloves—a textured tab on the end gives you a good grip.
Able to fit small bundles, these thin ties are more flexible than other ties.
Create custom-length ties from a roll with hook on one side and loop on the other.
These ties are flexible, reusable, and adjustable for delicate bundles or bundles that frequently change in size.
A textured tab on the end makes these cable ties easy to yank open and cinch shut, even when wearing gloves.
Flexible enough for small bundles, these ties are often used for electronics.
Easily open and cinch closed parallel bundles.
These ties meet UL flammability requirements.
Create a cable tie with a buckle—no sewing required.
Secure a bundle and then use the grommet to temporarily hang it from a hook or peg.
Mount bundles to surfaces with a screw or fastener. Since the mounting grommet on these ties is not accessible after material has been bundled, these ties are best for a permanent installation.
Quickly attach and detach a bundle.
Feed a bundle through the closed loop and wrap the ends around pipe or conduit for support.
Route and organize wire, cable, and hose along your DIN rail. Unlike zip ties, these cable ties can be temporarily undone to add or remove material.
Stick these ties to any smooth, clean surface.
Easily transport or hang cords, rope, and hose—these hook and loop cable ties include a handle.
Woven from flexible stainless steel yarn and Nomex, these ties handle temperatures up to 850° F.
Keep a set of these differently sized cable ties on hand to use when you need them. They're flexible, reusable, adjustable.
For use in the harshest environments, these ties withstand chemicals and UV rays.
The plastic coating on these ties adds an additional level of corrosion and abrasion resistance over other stainless steel cable ties.
The ripple in the body prevents over tightening and allows for expansion to protect material that frequently changes size, such as heat cable.
Identify bundles at a glance with these ties that are coated for an additional level of corrosion resistance.
Prevent metal cable ties from damaging cable with these cushions that cover the edges of a tie.
Stamp or emboss these ties to identify material.
Also known as lashing straps, use these to tightly secure material.
Hold bundles tightly with these cinching straps that conform to the shape of the material.
The hook on these straps quickly connects to the buckle—no need to spend time threading the end through the buckle.
Cut rolls to length and add the no-sew buckles. These straps stretch to hold bundles tight.
Cut rolls to length and add the no-sew buckle.
These stretchy ties conform to irregularly shaped bundles to grip material tightly.
The evenly spaced ball-shaped beads allow you to adapt to changes in bundle size.
These ties are wide and flat for a no-slip grip.
A hard rubber coating and wire core helps these ties maintain their shape.
Create strong and durable custom-length ties with a hard rubber coating and wire core.
Ties come on a spool for use in a twist tie machine.
Formed to the shape of a round bundle, these ties close with a single twist of the top.
Create custom-length ties for bundling delicate materials.
Bundle, close, and label bags and sacks.
The softest of our twist ties, they have a cushioned outer layer for bundling delicate materials.
Mount to a surface to secure and route cable.
Keep an assortment of large and small cable holders on hand for holding and routing cable across your surface.
Quickly organize bundles of up to 24 data cables over long runs often used in cable ladders and trays.
Whether you plan to change the bundle size or need a temporary hold, these ties have a release tab for removal and reuse.
Use the built-in blade to remove excess length once these ties are secure.
These ties are less likely to crack and break from dryness than regular cable ties.
Remove these cable ties with ease.
The rounded, low-profile head keeps these ties from snagging and allows them to fit in tight spaces.
Bundle items in areas, such as food plants, where the detection and retrieval of dropped or broken ties is essential. All of these ties are reusable and have a release tab for easy removal.
For use in environments subjected to chemicals, these ties withstand the most corrosive conditions.
The head of these cable ties is contoured to fit against pipe, tubing, and other round material for a tight fit.
These cable ties have a finely ribbed body and a metal-toothed head that allows them to adjust to the exact size of the material without slipping.
The tail slots into the head to create a temporary loop to hold wires. Hook and unhook the loop to add additional wires before permanently cinching the tie.
Secure and separate parallel bundles with the same tie.
Bundle and secure cable, wire, and hose.
These strong, wide ties are often used as an alternative to metal strapping.
Protect sensitive electronic equipment from static buildup.
Often used as tamper seals and in tagging applications, these ties create a consistent loop size every time.
These cable ties come with a material certificate with traceable lot number and product shelf life.
With a thin, flexible body, these cable ties fit tightly around irregularly shaped bundles.
Identify bundles at a glance.
Use these plastic cable ties when detection and retrieval are essential, such as in food processing applications. Ties are brightly colored for visibility and contain a special compound that can be picked up by X-ray equipment and metal detectors.
A foam padded back combined with an extra-wide body protects sensitive bundles, such as fiber optic cable.
Create custom-length cable ties for large bundles and heavy materials.
Attach these cable ties directly to a surface—no separate mount needed.
Reduce gaps between the cable tie and bundle—these ties have a smooth body that allows them to adjust to the exact size of the material.
Keep an assortment of cable ties on hand.
Thread the end through one of the perforations to secure.
Secure and separate two bundles with the same tie.
Use in light duty applications such as tagging and attaching documentation to equipment.
Lighter and safer than metal strapping, plastic strapping is also more flexible.
Slip these buckles onto strapping as you tighten.
Capable of securing 15 straps per minute, these mobile tensioners/sealers save you time and energy.
Use these coils in an automatic strapping machine.
Crimp on a seal with these tools to hold plastic strapping tight. They have different levers for tensioning and sealing.
These tools use heat to secure strapping without crimping on a seal.
Crimp these seals with a sealer after pulling strap tight with a tensioner.
Use these tensioners with buckles in low-tension applications to draw plastic strapping tight around packages.
These kits come with plastic strapping and tools to secure it around packages.
Also known as crimpers, sealers secure seals onto plastic strapping to hold it tight.
Roll these strapping kits wherever you need them.
These tensioners apply extreme tension on plastic strapping to hold it tight around packages. They hold the bottom strap and tension the top strap by winding it around a take-up wheel.
This metal strapping is the standard for packaging and shipping applications.
Use this metal strapping for securing pipe coverings as well as for packaging.
These kits with metal strapping have tools to tension and secure strapping around pallet loads, crates, and packages.
These tools do double duty, pulling metal strapping tight and then sealing it, without the use of a separate seal.
Also known as crimpers, sealers secure seals onto metal strapping.
Use a sealer to crimp these seals onto metal strapping to keep it under tension.
Use these tensioners to draw metal strapping tight around packages.
These tensioners apply maximum tension to pull strapping more tightly around packages than standard tensioners for metal strapping.
Roll these dispensers wherever you need them.
These plastic protectors have a ridged channel to hold strapping in place.
Roll these dispensers wherever you need them. They come with tools to tension and seal strapping around pallet loads, crates, and packages.
An economical alternative to plastic and metal strapping, these reusable bands keep items of all shapes and sizes in place during transit. No tools required.
These protectors are available in sizes up to 48" wide to protect boxes and improve their stacking strength.
These dispensers keep strapping coils neat and ready to use.
This wrap conforms to the contours of any item and adheres to itself.
This film has a corrosion inhibitor built-in to shield metal contents from corrosion.
This wrap has already been stretched so it won't decrease in width during application, meaning a stronger bind and fewer trips around to cover the load.
Protect sensitive items from static charges.
This printed stretch wrap comes on a handle so you can quickly apply a message to packages.
No need for a separate dispenser—these rolls already have dispensing handles.
Position these locks anywhere along a length of cord to create stops or separate cord from contact surfaces.
Also known as bungee cord and shock cord, a fabric cover protects the inner elastic from abrasion.
Suitable for marine environments, this cord resist corrosion from salt water and chlorine.
Strap is wider than cord to distribute pressure across the load.
This cord won't become brittle or hard after exposure to sunlight.
This cord has excellent stretch recovery and won't become brittle.
Color-coded by the year and quarter of manufacture, this cotton-covered elastic cord meets MIL-C-5651.
Push the mounting plate into the collar to grip the cord.
The thick wire coil on these hooks makes them stronger than standard hooks.
Create a loop in elastic cord by snapping these fittings together.
Attach these hooks to elastic cord to make a tie down.
Create a tie down by attaching these hooks to elastic strap.
Adjust the location of the hook along the cord.
Permanently sew webbing onto these buckles.
These buckles have a bar that grips webbing tightly without sewing.
Attach webbing to these buckles without sewing.
The slotted bar on these buckles allows you to attach an eye easily.
Use the split in the hook to slide a loop on and off these fittings.
Attach tips to webbing to prevent frayed ends and make it easier to thread.
Cotton is nonabrasive and soft enough to allow buckles to grip tightly.
Polypropylene is lightweight and economical.
A nylon core makes this webbing stronger than standard cotton webbing.
A tight weave gives this webbing better abrasion and slip resistance than standard nylon webbing.
Often used in temperatures up to 500° F without burning or melting. This webbing is also soft to the touch.
Able to resist stretching, polyester holds loads tightly.
Add a slide to webbing to make adjustable straps.
These slides are rated for heavy duty applications.
This webbing resists abrasion caused by sharp corners and edges.
Protect loads with this high-strength webbing that stretches to minimize shock to a load.
Permanently sew webbing onto these hooks.
This slip-resistant webbing remains flexible, even in low temperatures, and is easy to clean.
Adjust the length by attaching the hook into a slot in the strap.
With the strength of plastic and the stretch of rubber, these polyurethane rubber tie downs have excellent stretch recovery and won't become brittle.
Cinch the loop around large anchor points.
Shorten the length of the tie downs between the hooks.
Able to withstand high temperatures, oil, and most chemicals, these tie downs are appropriate for harsh environments.
These tie downs won't become brittle or hard after exposure to sunlight.
Also known as bungee cords and shock cords, these tie downs have an outer layer of fabric to protect the inner elastic from abrasion.
Heavy duty hooks and longer-lasting elastic cords make these tie downs stronger than standard abrasion-resistant tie downs.
Suitable for marine environments, these tie downs resist corrosion from salt water and chlorine.
Always have the straps you need. These assortments have straps from 8" to 35" long.
Also known as tarp straps, these tie downs stand up to wet weather and sunlight.
Sew webbing onto these plates for a permanent anchor point or run webbing through to use them as guides.
Long straps allow you to carry bundles of boxes, lumber, pipe, and other objects that weigh up to 85 lbs.
Use these handles on cans, hoses, ladders, and other objects that weigh up to 30 lbs.
With adhesive at both ends, these plastic strips stick to boxes, bags, and other objects to create a carrying handle.
Route wires, cables, and tubing along T‐slotted rails.
Suspend large and bulky items, such as coils of rope and step ladders.
Slide these clips on DIN rails—often used in equipment cabinet racks—to route and organize cables. Since these clips don’t require adhesive or screws, you can move them anywhere along the rail.
These fabric-covered rubber springs stretch to up to three times their original length—much farther than traditional extension springs, tie downs, and shock cords.
The flat side allows you to connect webbing and strapping, so they lay flat and resist bunching.
Hang, pull, and secure loads. These rings are good for general non-lifting applications.