McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    28 Products

    Burs

    Cylinder with Flat Tip
    Image of ProductInUse. Front orientation. Burs. Burs, Cylinder with Flat Tip.
    Image of Product. Single-Cut Tooth with Chip Breaker. Side1 orientation. ZoomedIn view. Burs. Burs, Cylinder with Flat Tip, Single-Cut Tooth with Chip Breaker.

    Single-Cut

    Tooth with Chip

    Breaker

    Flat cylinder burs are for straight edges and flat surfaces.
    Carbide—Best for removing material from a variety of metals. These burs are harder, stronger, and more wear resistant than high-speed steel.
    Single-Cut Tooth with Chip Breaker—Remove material fast with a fine finish. These burs cut like double-cut tools but leave a single-cut finish. They have single-cut teeth divided by diagonal rows of chip breakers. The chip breakers tackle your roughing work and reduce the pressure needed to cut, while the single-cut teeth create a smooth surface.
    Head
    Single-Cut Tooth with Chip
    Breaker (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Carbide
    1/4"1/4"5/8"2"SA-1Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel0000000000000
    1/4"5/16"3/4"2 1/2"SA-2Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel000000000000
    1/4"3/8"3/4"2 1/2"SA-3Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel000000000000
    1/4"1/2"1"2 3/4"SA-5Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel000000000000
     
    Cylinder with Flat-Cutter Tip
    Image of ProductInUse. Front orientation. Burs. Burs, Cylinder with Flat-Cutter Tip.
    Image of Product. Single-Cut Tooth with Chip Breaker. Side1 orientation. ZoomedIn view. Burs. Burs, Cylinder with Flat-Cutter Tip, Single-Cut Tooth with Chip Breaker.

    Single-Cut

    Tooth with Chip

    Breaker

    Flat cutter cylinder burs are for straight edges, flat surfaces, and flat-bottom holes and slots.
    Carbide—Best for removing material from a variety of metals. These burs are harder, stronger, and more wear resistant than high-speed steel.
    Single-Cut Tooth with Chip Breaker—Remove material fast with a fine finish. These burs cut like double-cut tools but leave a single-cut finish. They have single-cut teeth divided by diagonal rows of chip breakers. The chip breakers tackle your roughing work and reduce the pressure needed to cut, while the single-cut teeth create a smooth surface.
    Head
    Single-Cut Tooth with Chip
    Breaker (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Carbide
    1/4"1/4"5/8"2"SB-1Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel0000000000000
    1/4"5/16"3/4"2 1/2"SB-2Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel000000000000
    1/4"3/8"3/4"2 1/2"SB-3Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel000000000000
    1/4"1/2"1"2 3/4"SB-5Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel000000000000
     
    Cylinder with Round Tip
    Image of ProductInUse. Front orientation. Burs. Burs, Cylinder with Round Tip.
    Image of Product. Side1 orientation. ZoomedIn view. Burs. Burs, Cylinder with Round Tip, Single-Cut Tooth with Chip Breaker.

    Single-Cut

    Tooth with Chip

    Breaker

    Round cylinder burs are for curved surfaces and slots and round-bottom holes and slots.
    Carbide—Best for removing material from a variety of metals. These burs are harder, stronger, and more wear resistant than high-speed steel.
    Single-Cut Tooth with Chip Breaker—Remove material fast with a fine finish. These burs cut like double-cut tools but leave a single-cut finish. They have single-cut teeth divided by diagonal rows of chip breakers. The chip breakers tackle your roughing work and reduce the pressure needed to cut, while the single-cut teeth create a smooth surface.
    Head
    Single-Cut Tooth with Chip
    Breaker (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Carbide
    1/4"1/4"5/8"2"SC-1Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel0000000000000
    1/4"5/16"3/4"2 1/2"SC-2Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel000000000000
    1/4"3/8"3/4"2 1/2"SC-3Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel000000000000
    1/4"1/2"1"2 3/4"SC-5Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel000000000000
     
    Tree with Round Tip
    Image of ProductInUse. Front orientation. Burs. Burs, Tree with Round Tip.
    Image of Product. Side1 orientation. ZoomedIn view. Burs. Burs, Tree with Round Tip, Single-Cut Tooth with Chip Breaker.

    Single-Cut

    Tooth with Chip

    Breaker

    Round tree burs are for curved surfaces and slots and curved holes with rounded bottoms.
    Carbide—Best for removing material from a variety of metals. These burs are harder, stronger, and more wear resistant than high-speed steel.
    Single-Cut Tooth with Chip Breaker—Remove material fast with a fine finish. These burs cut like double-cut tools but leave a single-cut finish. They have single-cut teeth divided by diagonal rows of chip breakers. The chip breakers tackle your roughing work and reduce the pressure needed to cut, while the single-cut teeth create a smooth surface.
    Head
    Single-Cut Tooth with Chip
    Breaker (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Carbide
    1/4"1/4"5/8"2"SF-1Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel0000000000000
    1/4"3/8"3/4"2 1/2"SF-3Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel000000000000
    1/4"1/2"1"2 3/4"SF-5Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel000000000000
     
    Tree with Pointed Tip
    Image of ProductInUse. Front orientation. Burs. Burs, Tree with Pointed Tip.
    Image of Product. Single-Cut Tooth with Chip Breaker. Side1 orientation. ZoomedIn view. Burs. Burs, Tree with Pointed Tip, Single-Cut Tooth with Chip Breaker.

    Single-Cut

    Tooth with Chip

    Breaker

    Pointed tree burs are for curved surfaces and slots and curved holes with pointed bottoms.
    Carbide—Best for removing material from a variety of metals. These burs are harder, stronger, and more wear resistant than high-speed steel.
    Single-Cut Tooth with Chip Breaker—Remove material fast with a fine finish. These burs cut like double-cut tools but leave a single-cut finish. They have single-cut teeth divided by diagonal rows of chip breakers. The chip breakers tackle your roughing work and reduce the pressure needed to cut, while the single-cut teeth create a smooth surface.
    Head
    Single-Cut Tooth with Chip
    Breaker (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Carbide
    1/4"1/4"5/8"2"SG-1Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel0000000000000
    1/4"5/16"3/4"2 1/2"SG-2Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel000000000000
    1/4"3/8"3/4"2 1/2"SG-3Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel000000000000
    1/4"1/2"1"2 3/4"SG-5Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel000000000000
     
    Ball
    Image of ProductInUse. Front orientation. Burs. Burs, Ball.
    Image of Product. Side1 orientation. ZoomedIn view. Burs. Burs, Ball, Single-Cut Tooth with Chip Breaker.

    Single-Cut

    Tooth with Chip

    Breaker

    Ball burs are for curved surfaces, round slots, and round-bottom holes.
    Carbide—Best for removing material from a variety of metals. These burs are harder, stronger, and more wear resistant than high-speed steel.
    Single-Cut Tooth with Chip Breaker—Remove material fast with a fine finish. These burs cut like double-cut tools but leave a single-cut finish. They have single-cut teeth divided by diagonal rows of chip breakers. The chip breakers tackle your roughing work and reduce the pressure needed to cut, while the single-cut teeth create a smooth surface.
    Head
    Single-Cut Tooth with Chip
    Breaker (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Carbide
    1/4"1/4"7/32"2"SD-1Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel0000000000000
    1/4"5/16"1/4"2"SD-2Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel000000000000
    1/4"3/8"5/16"2 3/32"SD-3Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel000000000000
    1/4"1/2"7/16"2 7/32"SD-5Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel000000000000
     
    Flame
    Image of ProductInUse. Front orientation. Burs. Burs, Flame.
    Image of Product. Side1 orientation. ZoomedIn view. Burs. Burs, Flame, Single-Cut Tooth with Chip Breaker.

    Single-Cut

    Tooth with Chip

    Breaker

    Flame burs are for contoured surfaces, slots, and holes.
    Carbide—Best for removing material from a variety of metals. These burs are harder, stronger, and more wear resistant than high-speed steel.
    Single-Cut Tooth with Chip Breaker—Remove material fast with a fine finish. These burs cut like double-cut tools but leave a single-cut finish. They have single-cut teeth divided by diagonal rows of chip breakers. The chip breakers tackle your roughing work and reduce the pressure needed to cut, while the single-cut teeth create a smooth surface.
    Head
    Single-Cut Tooth with Chip
    Breaker (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Carbide
    1/4"5/16"3/4"2 1/2"SH-2Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel0000000000000
    1/4"1/2"1 1/4"3"SH-5Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel000000000000
     
    Oval
    Image of ProductInUse. Front orientation. Burs. Burs, Oval.
    Image of Product. Side1 orientation. ZoomedIn view. Burs. Burs, Oval, Single-Cut Tooth with Chip Breaker.

    Single-Cut

    Tooth with Chip

    Breaker

    Oval burs are for oblong slots and holes.
    Carbide—Best for removing material from a variety of metals. These burs are harder, stronger, and more wear resistant than high-speed steel.
    Single-Cut Tooth with Chip Breaker—Remove material fast with a fine finish. These burs cut like double-cut tools but leave a single-cut finish. They have single-cut teeth divided by diagonal rows of chip breakers. The chip breakers tackle your roughing work and reduce the pressure needed to cut, while the single-cut teeth create a smooth surface.
    Head
    Single-Cut Tooth with Chip
    Breaker (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Carbide
    1/4"1/2"7/8"2 5/8"SE-5Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel0000000000000
     
    Tapered Cone with Round Tip
    Image of ProductInUse. Front orientation. Burs. Burs, Tapered Cone with Round Tip.
    Image of Product. Side1 orientation. ZoomedIn view. Burs. Burs, Tapered Cone with Round Tip, Single-Cut Tooth with Chip Breaker.

    Single-Cut

    Tooth with Chip

    Breaker

    Round tapered cone burs are for tapered holes and slots with rounded bottoms.
    Carbide—Best for removing material from a variety of metals. These burs are harder, stronger, and more wear resistant than high-speed steel.
    Single-Cut Tooth with Chip Breaker—Remove material fast with a fine finish. These burs cut like double-cut tools but leave a single-cut finish. They have single-cut teeth divided by diagonal rows of chip breakers. The chip breakers tackle your roughing work and reduce the pressure needed to cut, while the single-cut teeth create a smooth surface.
    Head
    Single-Cut Tooth with Chip
    Breaker (Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Tip
    Angle
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Carbide
    1/4"3/8"1 1/16"14°2 15/16"SL-3Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel0000000000000
    1/4"1/2"1 1/8"14°3"SL-4Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel000000000000
     
    back to top