Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

With extra iron and filled with oil containing slippery PTFE, these bearings support heavy loads that frequently start and stop along shafts.

Embedded with oil that is safe for incidental contact with food, these bearings are suitable for use in high-load applications such as bottling and filling lines in food processing plants. They are also known as Super Oilite® bearings.

Made of FDA-listed materials or FDA compliant, these bearings are for use in food applications. They also withstand caustic and washdown environments.

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

The oil in these bearings is suitable for incidental contact with food.

Use where high loads and speeds are not required.

Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.

These bronze bearings are strong, wear resistant, and excellent at handling shock loads.

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

The oil in these bearings is NSF registered H1 and FDA compliant for incidental contact with food.

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface.

Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface.

These metal collars are stronger than plastic shaft collars.

Installing and removing a collar is as easy as pushing down and lifting up a clamp lever.

These metal collars are stronger than plastic shaft collars.

With larger screws than those found on standard clamping collars, these provide a stronger grip on your shaft without using additional screws.

Make quick adjustments to these shaft collars with a lever on the side.