Mounts for Robot Teach Pendants
Store your robot teach pendant conveniently near your robot but out of harm’s way. These mounts can also be used as a holder while you operate the teach pendant.
Mounts with arm can be positioned and adjusted once installed. Attach them to T-slotted framing systems with the included fasteners, or mount them on a nearby surface (mounting screws not included).
For technical drawings and 3-D models, click on a part number.
For Manufacturer | Range of Motion | For Rail Ht. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Robot Arm (Series/Model No.) | Controller Model No. | Lg. | Wd. | Ht. | Arm Lg. | Rotation | Tilt | Single | Double and Quad | Triple | Mount. Fasteners Included | Each | |
Gray Powder-Coated Steel Mount with Aluminum Arm | |||||||||||||
| FANUC (ARC Mate 120iC, 120iC/10L; CR 4ia, 7ia, LR Mate 200iD/7L; M-20 iA) | R30iB R30iB Plus | 8 3/4" | 4 1/4" | 14" | 11 1/4" | 360° | 248° | 1", 1 1/2", 40mm | 2", 3", 80mm | 3", 4 1/2" | Yes | 00000000 | 0000000 |
| FANUC (CRX 10iA, 10iA/L) | R30iB Mini Plus | 7 1/2" | 4 1/2" | 11 3/4" | 11 1/4" | 360° | 248° | 1", 1 1/2", 40mm | 2", 3", 80mm | 3", 4 1/2" | Yes | 0000000 | 000000 |
Robot Bases
For technical drawings and 3-D models, click on a part number.
Attach T-slotted framing kits to square bases as a support for accessories, such as teach pendants, or to build custom cable management systems onto your base.
Rail | |||||||
|---|---|---|---|---|---|---|---|
| Profile | Ht. | Lg. | Wd. | T-Slot Width | Includes | Each | |
Aluminum Rail | |||||||
| Double | 3" | 9" | 1 1/2" | 0.32" | Four Mounting Screws, T-Slotted Framing Rail, Two Mounting Brackets | 0000000 | 000000 |
T-Slotted Framing Mounting Brackets
Attach sensors, tubes, and other components to T-slotted framing rails and structures.
For technical drawings and 3-D models, click on a part number.
Tube holders attach 1" OD tubes (sold separately) to a framing system. Use them to create dispensers, glides, or racks. Rail-to-tube holders use a hex key to secure the tube in place. Quick-install tube-to-tube holders have a handle to secure the tube in place.
| For Rail Ht. | For Tube OD | Color | Material | Handle Material | Mounting Fasteners Included | Each | |
Rail-to-Tube for Double and Quad Rails | |||||||
|---|---|---|---|---|---|---|---|
| 2" | 1" | Silver | Anodized Aluminum | __ | Yes | 000000000 | 000000 |
| 3" | 1" | Silver | Anodized Aluminum | __ | Yes | 00000000 | 00000 |
Offset Rail-to-Tube for Double and Quad Rails | |||||||
| 2" | 1" | Silver | Anodized Aluminum | __ | Yes | 00000000 | 00000 |
| 3" | 1" | Silver | Anodized Aluminum | __ | Yes | 000000000 | 00000 |
Inline Rail-to-Tube for Double and Quad Rails | |||||||
| 2" | 1" | Silver | Anodized Aluminum | __ | Yes | 00000000 | 00000 |
| 3" | 1" | Silver | Anodized Aluminum | __ | Yes | 000000000 | 00000 |
Quick-Install Tube-to-Tube for Single and Double and Quad Rails | |||||||
| 1", 1 1/2", 2", 3" | 1" | Silver | Anodized Aluminum | Plastic | No | 00000000 | 00000 |
| OD | ID | Lg., ft. | Material | Each | |
| 1" | 3/4" | 4 | Aluminum | 000000000 | 000000 |
Concealed mounting plates slide inside the T-slot and have mounting holes. Attach parts to the bracket with screws (not included), and tighten the screws to hold the bracket in place.
For Rail Ht. | Mounting Holes | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Triple | Wd. | Lg. | Thick. | Color | Material | No. of | Ctr.-to-Ctr., mm | Thread Size | Fasteners Included | Each | |
| 1 1/2", 30mm, 40mm | 3", 60mm, 80mm | 4 1/2", 120mm | 5/8" | 6 5/16" | 3/8" | Silver | Anodized Aluminum | 3 | 60 | M4 × 0.7mm | No | 000000000 | 000000 |
| 1 1/2", 30mm, 40mm | 3", 60mm, 80mm | 4 1/2", 120mm | 5/8" | 8 11/16" | 3/8" | Silver | Anodized Aluminum | 4 | 60 | M4 × 0.7mm | No | 000000000 | 00000 |
| 1 1/2", 30mm, 40mm | 3", 60mm, 80mm | 4 1/2", 120mm | 5/8" | 11" | 3/8" | Silver | Anodized Aluminum | 5 | 60 | M4 × 0.7mm | No | 000000000 | 00000 |
Square mounting plates have room to drill custom mounting holes for attaching parts to T-slotted framing.
For Rail Ht. | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Triple | Wd. | Lg. | Thick. | Material | Mounting Fasteners Included | Each | |
Silver | |||||||||
| 1" | 2" | 3" | 2" | 2" | 3/16" | Anodized Aluminum | Yes | 000000000 | 000000 |
| 1" | 2" | 3" | 3" | 3" | 3/16" | Anodized Aluminum | Yes | 000000000 | 00000 |
| 1 1/2" | 3" | 4 1/2" | 3" | 3" | 1/4" | Anodized Aluminum | Yes | 000000000 | 00000 |
| 1 1/2" | 3" | 4 1/2" | 4" | 4" | 1/4" | Anodized Aluminum | Yes | 000000000 | 00000 |
| 30mm | 60mm | __ | 2 3/8" | 2 3/8" | 1/8" | Anodized Aluminum | Yes | 00000000 | 00000 |
| 40mm | 80mm | 120mm | 3 1/8" | 3 1/8" | 1/4" | Anodized Aluminum | Yes | 00000000 | 00000 |
| 45mm | 90mm | __ | 3 1/2" | 3 1/2" | 1/4" | Anodized Aluminum | Yes | 00000000 | 00000 |
Black | |||||||||
| 1" | 2" | 3" | 2" | 2" | 3/16" | Anodized Aluminum | Yes | 000000000 | 00000 |
| 1 1/2" | 3" | 4 1/2" | 3" | 3" | 1/4" | Anodized Aluminum | Yes | 000000000 | 00000 |
Snap-in mounting plates snap in to the rail.
For Rail Ht. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Triple | Wd. | Lg. | Color | Material | No. of Slots | For Screw Size  | Each | |
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 4" | 4 3/8" | Black | Powder-Coated Steel | 4 | 1/4" | 000000000 | 000000 |
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 6" | 6 3/8" | Black | Powder-Coated Steel | 12 | 1/4" | 000000000 | 00000 |
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 8" | 8 7/16" | Black | Powder-Coated Steel | 14 | 3/8" | 000000000 | 00000 |
Rectangular mounting plates have room to drill custom mounting holes for attaching parts to T-slotted framing.
For Rail Ht. | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Triple | Wd. | Lg. | Thick. | Material | Mounting Fasteners Included | Each | |
Silver | |||||||||
| 1" | 2" | 3" | 2" | 1" | 3/16" | Anodized Aluminum | Yes | 000000000 | 000000 |
| 1" | 2" | 3" | 3" | 1" | 3/16" | Anodized Aluminum | Yes | 000000000 | 00000 |
| 1 1/2" | 3" | 4 1/2" | 3" | 1 1/2" | 1/4" | Anodized Aluminum | Yes | 000000000 | 00000 |
| 1 1/2" | 3" | 4 1/2" | 4" | 1 1/2" | 1/4" | Anodized Aluminum | Yes | 000000000 | 00000 |
| 30mm | 60mm | __ | 2 3/8" | 1 1/8" | 1/8" | Anodized Aluminum | Yes | 00000000 | 00000 |
| 40mm | 80mm | 120mm | 3 1/8" | 1 5/8" | 1/4" | Anodized Aluminum | Yes | 00000000 | 00000 |
| 45mm | 90mm | __ | 3 1/2" | 1 3/4" | 1/4" | Anodized Aluminum | Yes | 00000000 | 00000 |
Black | |||||||||
| 1" | 2" | 3" | 2" | 1" | 3/16" | Anodized Aluminum | Yes | 000000000 | 00000 |
| 1 1/2" | 3" | 4 1/2" | 3" | 1 1/2" | 1/4" | Anodized Aluminum | Yes | 000000000 | 00000 |
Fixture mounting plates have threaded and unthreaded holes in a grid pattern for precise positioning and repeatability. They're often used with coordinate measuring machines.
End cap mounting plates have a threaded hole to accept attachments such as mounting feet and stem casters.
Silver | Black | ||||||
|---|---|---|---|---|---|---|---|
| For Rail Ht. | For Stem Thread Size | Material | Mounting Fasteners Included | Each | Each | ||
For Double Rails | |||||||
| 2" | 1/4"-20 | Powder-Coated Zinc | Yes | 00000000 | 000000 | 000000000 | 000000 |
| 2" | 3/8"-16 | Powder-Coated Zinc | Yes | 00000000 | 00000 | 000000 | 00 |
| 3" | 1/2"-13 | Powder-Coated Zinc | Yes | 00000000 | 00000 | 000000 | 00 |
| 3" | 3/8"-16 | Powder-Coated Zinc | Yes | 00000000 | 00000 | 000000000 | 00000 |
| 40mm | M6 × 1mm | Powder-Coated Zinc | Yes | 000000 | 00 | 00000000 | 00000 |
| 60mm | M8 × 1.25mm | Powder-Coated Zinc | Yes | 000000 | 00 | 00000000 | 00000 |
| 80mm | M8 × 1.25mm | Powder-Coated Zinc | Yes | 000000 | 00 | 00000000 | 00000 |
| 90mm | M12 × 1.75mm | Powder-Coated Zinc | Yes | 000000 | 00 | 00000000 | 00000 |
Sensor holders are compatible with laser sensors, photo eyes, and light-sensing switches. Adjustable sensor holders allow 360° positioning.
For Rail Ht. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Triple | For Sensor OD, mm | Arm Lg. | Color | Material | Max. Load Cap., lbs. | Mounting Fasteners Included | Each | |
Fixed | ||||||||||
| 1" | 2" | 3" | 12 | __ | Black | Plastic | __ | Yes | 00000000 | 00000 |
| 1" | 2" | 3" | 18 | __ | Black | Plastic | __ | Yes | 000000000 | 0000 |
| 30mm, 40mm | 60mm, 80mm | 120mm | 12 | __ | Black | Plastic | __ | Yes | 00000000 | 0000 |
| 30mm, 40mm | 60mm, 80mm | 120mm | 18 | __ | Black | Plastic | __ | Yes | 00000000 | 0000 |
| 45mm | 90mm | __ | 12 | __ | Black | Plastic | __ | Yes | 00000000 | 0000 |
| 45mm | 90mm | __ | 18 | __ | Black | Plastic | __ | Yes | 00000000 | 0000 |
Adjustable | ||||||||||
| 1", 1 1/2", 40mm | 2", 3", 80mm | 3", 4 1/2", 120mm | 10 | 8 1/16" | Blue | Anodized Aluminum | 30 | Yes | 00000000 | 000000 |
| 1", 1 1/2", 40mm | 2", 3", 80mm | 3", 4 1/2", 120mm | 13 | 8 1/16" | Blue | Anodized Aluminum | 30 | Yes | 00000000 | 000000 |
| 1", 1 1/2", 40mm | 2", 3", 80mm | 3", 4 1/2", 120mm | 19 | 8 1/16" | Blue | Anodized Aluminum | 30 | Yes | 00000000 | 000000 |
| 1", 1 1/2", 40mm | 2", 3", 80mm | 3", 4 1/2", 120mm | 32 | 8 15/16" | Blue | Anodized Aluminum | 30 | Yes | 00000000 | 000000 |
Guide rail mounts slide inside the T-slot and are compatible with any guide rail that has M4 mounting holes that are 60 mm apart center-to-center. Attach a guide rail to the mount with screws (not included), and tighten the screws to hold the mount in place.
For Rail Ht. | Mounting Holes | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Triple | Wd. | Lg. | Thick. | Color | Material | No. of | Center-to-Center, mm | Thread Size | Fasteners Included | Each | |
| 1 1/2", 40mm | 3", 60mm, 80mm | 4 1/2", 120mm | 5/8" | 6 5/16" | 3/8" | Silver | Anodized Aluminum | 3 | 60 | M4 × 0.7mm | No | 00000000 | 000000 |
| 1 1/2", 40mm | 3", 60mm, 80mm | 4 1/2", 120mm | 5/8" | 8 11/16" | 3/8" | Silver | Anodized Aluminum | 4 | 60 | M4 × 0.7mm | No | 00000000 | 00000 |
| 1 1/2", 40mm | 3", 60mm, 80mm | 4 1/2", 120mm | 5/8" | 11" | 3/8" | Silver | Anodized Aluminum | 5 | 60 | M4 × 0.7mm | No | 00000000 | 00000 |
| 1 1/2", 40mm | 3", 60mm, 80mm | 4 1/2", 120mm | 5/8" | 13 3/8" | 3/8" | Silver | Anodized Aluminum | 6 | 60 | M4 × 0.7mm | No | 00000000 | 00000 |
| 1 1/2", 40mm | 3", 60mm, 80mm | 4 1/2", 120mm | 5/8" | 18 1/8" | 3/8" | Silver | Anodized Aluminum | 8 | 60 | M4 × 0.7mm | No | 00000000 | 00000 |
| 1 1/2", 40mm | 3", 60mm, 80mm | 4 1/2", 120mm | 5/8" | 25 3/16" | 3/8" | Silver | Anodized Aluminum | 11 | 60 | M4 × 0.7mm | No | 00000000 | 00000 |
| 1 1/2", 40mm | 3", 60mm, 80mm | 4 1/2", 120mm | 5/8" | 32 1/4" | 3/8" | Silver | Anodized Aluminum | 14 | 60 | M4 × 0.7mm | No | 00000000 | 00000 |
Threaded mounting bases attach threaded rod (sold separately) to a framing system.
For Rail Ht. | Thread | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Triple | Size | Lg., mm | Wd. | Lg. | Color | Material | Mounting Fasteners Included | Each | |
| 1" | 2" | 3" | M6 × 1mm | 16 | 1" | 1 3/4" | Black | Steel | Yes | 00000000 | 000000 |
| 1" | 2" | 3" | M8 × 1.25mm | 16 | 1" | 1 3/4" | Black | Steel | Yes | 00000000 | 00000 |
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | M10 × 1.5mm | 24 | 1 3/16" | 2 3/8" | Black | Steel | Yes | 00000000 | 00000 |
| 1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | M12 × 1.75mm | 24 | 1 3/16" | 2 3/8" | Black | Steel | Yes | 00000000 | 00000 |
Adhesive-surface mounting strips attach lightweight objects to T-slotted framing without the need for fasteners.
Machine brackets are made to tight dimensional tolerances for use on machines and automated equipment.
| For Rail Ht. | Ht. | Wd. | Lg. | Lg. Tolerance | Thick. | Thick. Tolerance | Color | Material | For Screw Size | Mounting Fasteners Included | Each | |
For Double Rails | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3" | 1 1/2" | 1 1/2" | 2 1/4" | -0.02" to 0.02" | 1/8" | -0.009" to 0.009" | Silver | Aluminum | 1/4" | Yes | 000000000 | 000000 |
| 3" | 1 1/2" | 1 1/2" | 3" | -0.02" to 0.02" | 1/8" | -0.009" to 0.009" | Silver | Aluminum | 1/4" | Yes | 000000000 | 00000 |
Machine vision camera mounts allow 360° positioning. They're hollow for routing cables.
For Rail Ht. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Triple | Mounting Hole Pattern Compatibility | Arm Lg. | Color | Material | Max. Load Cap., lbs. | Mounting Fasteners Included | Each | |
| 1", 1 1/2", 40mm | 2", 3", 80mm | 3", 4 1/2", 120mm | Cognex In-Sight 7000 Cognex In-Sight 7800 Cognex Dataman 70 Cognex Dataman 300 Cognex Dataman 302 Cognex Dataman 360 Cognex Dataman 470 Cognex Dataman 474 | 9 1/8" | Blue | Anodized Aluminum | 30 | Yes | 00000000 | 0000000 |
Start/stop switch mounts allow 360° positioning. They're hollow for routing cables.
For Rail Ht. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Triple | For Sensor/Switch OD, mm | Arm Lg. | Color | Material | Max. Load Cap., lbs. | Mounting Fasteners Included | Each | |
| 1", 1 1/2", 40mm | 2", 3", 80mm | 3", 4 1/2", 120mm | 30 | 6 3/4" | Blue | Anodized Aluminum | 30 | Yes | 00000000 | 0000000 |
Stack light mounts allow 360° positioning. They're hollow for routing cables.
For Rail Ht. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double and Quad | Triple | For Stem Thread Size | Arm Lg. | Color | Material | Max. Load Cap., lbs. | Mounting Fasteners Included | Each | |
| 1", 1 1/2", 40mm | 2", 3", 80mm | 3", 4 1/2", 120mm | M22 × 1.5mm | 6 3/4" | Blue | Anodized Aluminum | 30 | Yes | 00000000 | 0000000 |
| 1", 1 1/2", 40mm | 2", 3", 80mm | 3", 4 1/2", 120mm | M30 × 1.5mm | 6 3/4" | Blue | Anodized Aluminum | 30 | Yes | 00000000 | 000000 |
T-Slotted Framing Mounts for Monitors and Computer Accessories
Attach and position phones, tablets, monitors, and computer accessories on T-slotted rails.
For technical drawings and 3-D models, click on a part number.
Monitor mounts have a VESA (Video Electronics Standards Association) standard mounting hole pattern, so they will match most monitors. They fit in tight spaces because they mount directly to T-slotted rails. Friction monitor mounts stay in place if bumped, but they require you to move the entire weight of the monitor.
For Rail Ht. | Overall | Monitor | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Single | Double, Quad | Triple | Projection | Ht. | Wd. | Max. Load Capacity, lbs. | For Monitor Size | Mount Type | Mounting Hole Pattern Compatibility | Color | Material | Mounting Fasteners Included | Each | |
Rotate | |||||||||||||||
| A | 1 1/2" 40mm 45mm | 3" 80mm 90mm | 4 1/2" 120mm | 1" | 4 1/2" | 4 1/2" | 10 | 12"-24" | Friction | VESA 75 × 75 VESA 100 × 100 | Black | Plastic | Yes | 0000000 | 000000 |
Tilt | |||||||||||||||
| B | 45mm | 90mm | __ | 1" | 4 17/32" | 5 9/16" | 26 | 12"-24" | Friction | VESA 75 × 75 VESA 100 × 100 | Silver | Anodized Aluminum | Yes | 0000000 | 00000 |
Rotate, Tilt | |||||||||||||||
| C | 1 1/2" 40mm | 3" 80mm | 4 1/2" 120mm | 3" | 4 7/16" | 4 7/16" | 10 | 12"-24" | Friction | VESA 75 × 75 VESA 100 × 100 | Black | Plastic | Yes | 000000000 | 00000 |
Monitor mounts have a VESA (Video Electronics Standards Association) standard mounting hole pattern, so they will match most monitors. Friction monitor mounts stay in place if bumped, but they require you to move the entire weight of the monitor. Counterbalance monitor mounts offset the weight of the monitor for easy adjustment but shift out of place easily if bumped.
Mounts with a positioning arm extend and adjust to accommodate multiple users. Move them out of the way when not in use.
For Rail Ht. | Overall | Monitor | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Single | Double, Quad | Triple | Projection | Ht. | Wd. | Max. Load Capacity, lbs. | For Monitor Size | Mount Type | Mounting Hole Pattern Compatibility | Color | Material | Mounting Fasteners Included | Each | |
Rotate, Side-to-Side, Tilt, In/Out | |||||||||||||||
| D | 45mm | 90mm | __ | 14 3/16" | 4 17/32" | 5 9/16" | 26 | 12"-24" | Friction | VESA 75 × 75 VESA 100 × 100 | Silver | Anodized Aluminum | Yes | 0000000 | 0000000 |
Rotate, Side-to-Side, Tilt, Up/Down | |||||||||||||||
| E | 1 1/2" 40mm 45mm | 3" 80mm 90mm | 4 1/2" 120mm | 17 3/16" | 14 9/32" | 4 7/16" | 20 | 12"-24" | Counterbalance | VESA 75 × 75 VESA 100 × 100 | Silver | Lacquer-Coated Aluminum | Yes | 00000000 | 000000 |
| F | 1 1/2" 40mm 45mm | 3" 80mm 90mm | 4 1/2" 120mm | 25" | 21 1/4" | 4 7/16" | 20 | 12"-24" | Counterbalance | VESA 75 × 75 VESA 100 × 100 | Silver | Powder-Coated Aluminum | Yes | 0000000 | 000000 |
For Rail Ht. | Overall | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Single | Double, Quad | Triple | Ht. | Wd. | Dp. | Max. Load Capacity, lbs. | Color | Material | Mounting Fasteners Included | Each | |
| G | 1 1/2" 40mm | 3" 80mm | 4 1/2" 120mm | 1 5/16" | 24 13/16" | 12 5/8" | 66 | Silver | Anodized Aluminum | Yes | 0000000 | 0000000 |
Mounts with a positioning arm extend and adjust to accommodate multiple users. Move them out of the way when not in use.
For Rail Ht. | Overall | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Single | Double, Quad | Triple | Projection | Ht. | Wd. | Max. Load Capacity, lbs. | Color | Material | Mounting Fasteners Included | Each | |
Rotate, Side-to-Side, In/Out | ||||||||||||
| H | 1 1/2" 40mm | 3" 80mm | 4 1/2" 120mm | 26 7/16" | 3 15/16" | 20 11/16" | 26 | Silver | Powder-Coated Aluminum | Yes | 0000000 | 0000000 |
Mounts with a positioning arm extend and adjust to your needs. Move them out of the way when not in use.
For Rail Ht. | Overall | Monitor | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Single | Double, Quad | Triple | Projection | Ht. | Wd. | Max. Load Capacity, lbs. | For Monitor Size | Mount Type | Mounting Hole Pattern Compatibility | Color | Material | Mounting Fasteners Included | Each | |
Rotate, Side-to-Side, Tilt, Up/Down | |||||||||||||||
| J | 1 1/2" 40mm | 3" 80mm | 4 1/2" 120mm | 37" | 19 1/16" | 18 1/2" | 20 | 12"-24" | Counterbalance | VESA 75 × 75 VESA 100 × 100 | Silver | Powder-Coated Aluminum | Yes | 0000000 | 0000000 |
For Rail Ht. | For Device | Overall | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Single | Double, Quad | Triple | Wd. | Ht. | Ht. | Wd. | Dp. | Max. Load Capacity, lbs. | Color | Material | Mounting Fasteners Included | Each | |
| K | 1 1/2" 40mm | 3" 80mm | 4 1/2" 120mm | 3 5/32"-9 7/16" | 12 7/32"-20 13/16" | 25" | 9 1/2" | 13 3/8" | 66 | Silver | Powder-Coated Aluminum | Yes | 0000000 | 0000000 |
For Rail Ht. | Overall | Monitor | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Single | Double, Quad | Triple | For Device Wd. | Ht. | Wd. | Dp. | Max. Load Capacity, lbs. | For Monitor Size | Mount Type | Mounting Hole Pattern Compatibility | Color | Material | Mounting Fasteners Included | Each | |
| L | 1 1/2" 40mm | 3" 80mm | 4 1/2" 120mm | 1 13/32"-1 15/16" | 4 1/2" | 4 1/2" | 2 3/16" | 22 | 12"-24" | Fixed | VESA 75 × 75 VESA 100 × 100 | Silver | Powder-Coated Aluminum | Yes | 0000000 | 000000 |
Hand-held device mounts have adjustable grips for a secure hold on your device.
Mounts with a ball-grip positioning arm extend and adjust to accommodate multiple users. They have a ball-and-socket connection for 360° positioning. Move them out of the way when not in use.
For Rail Ht. | Overall | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Single | Double, Quad | Triple | For Device Wd. | Projection | Ht. | Wd. | Max. Load Capacity, lbs. | Color | Material | Mounting Fasteners Included | Each | |
Rotate, Side-to-Side, Tilt, In/Out, Up/Down | |||||||||||||
| M | 1" 1 1/2" 30mm 40mm 45mm | 2" 3" 60mm 80mm 90mm | 3" 4 1/2" 120mm | 1 7/8"-3 1/4" | 7 1/2" | 3 1/4" | 3 1/4" | 1 | Black | Powder-Coated Aluminum | Yes | 000000000 | 000000 |
Tablet mounts have adjustable grips for a secure hold on your device.
Mounts with a ball-grip positioning arm extend and adjust to accommodate multiple users. They have a ball-and-socket connection for 360° positioning. Move them out of the way when not in use.
For Rail Ht. | Overall | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Single | Double, Quad | Triple | For Device Wd. | Projection | Ht. | Wd. | Max. Load Capacity, lbs. | Color | Material | Mounting Fasteners Included | Each | |
Rotate, Side-to-Side, Tilt, In/Out, Up/Down | |||||||||||||
| N | 1" 1 1/2" 30mm 40mm 45mm | 2" 3" 60mm 80mm 90mm | 3" 4 1/2" 120mm | 6 1/4"-8 3/32" | 8 1/16" | 10 1/4" | 8 1/8" | 3 | Black | Powder-Coated Aluminum | Yes | 00000000 | 0000000 |
T-Slotted Framing Positioning Arms
Make your T-slotted framing workstation more ergonomic. These positioning arms let you move tools and other items within reach, reducing fatigue and streamlining repetitive processes.
Extended positioning arms lock into position when you tighten the screws in the joints. Those with a cable-routing hole are hollow, so you can route cables through them.
Ball-grip positioning arms have ball-and-socket connections, so the entire arm moves 360°. Secure items using the mounting plate.
Arms with AMPS mounting hole pattern are often used on GPS units, cameras, and other small electronics.
For technical drawings and 3-D models, click on a part number.
For Rail Ht. | Attaching End | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Single | Double, Quad | Triple | Projection | Overall Ht. | Max. Load Capacity, lbs. | Color | Material | Mount Type | Fasteners Included | Mounting Hole Pattern Compatibility | Mounting Fasteners Included | Each | |
Positioning Arm | |||||||||||||
Rotate, Side-to-Side, In/Out | |||||||||||||
| 1 1/2" 40mm | 3" 80mm | 4 1/2" 120mm | 14 5/8" | 3 7/8" | 26 | Silver | Anodized Aluminum | T-Slot | Yes | __ | Yes | 0000000 | 0000000 |
| 1 1/2" 40mm | 3" 80mm | 4 1/2" 120mm | 14 5/8" | 7 5/16" | 89 | Silver | Anodized Aluminum | T-Slot | Yes | __ | Yes | 0000000 | 000000 |
Extended Positioning Arm | |||||||||||||
Rotate, Side-to-Side, In/Out | |||||||||||||
| 1 1/2" 40mm | 3" 80mm | 4 1/2" 120mm | 27 3/8" | 5 3/4" | 17 | Silver | Anodized Aluminum | T-Slot | Yes | __ | Yes | 0000000 | 000000 |
| 1 1/2" 40mm | 3" 80mm | 4 1/2" 120mm | 27 3/8" | 9 7/16" | 31 | Silver | Anodized Aluminum | T-Slot | Yes | __ | Yes | 0000000 | 000000 |
Ball-Grip Positioning Arm | |||||||||||||
Rotate, Side-to-Side, Tilt, In/Out, Up/Down | |||||||||||||
| 1" 1 1/2" 30mm 40mm 45mm | 2" 3" 60mm 80mm 90mm | 3" 4 1/2" 120mm | 5 3/8" | 3 1/4" | 3 | Black | Powder-Coated Aluminum | Plate | No | AMPS | Yes | 000000000 | 00000 |
Extended Ball-Grip Positioning Arm with Cable Routing Hole | |||||||||||||
Rotate, Side-to-Side, Tilt, In/Out, Up/Down | |||||||||||||
| 1" 1 1/2" 40mm | 2" 3" 80mm | 3" 4 1/2" 120mm | 11 7/16" | 4 5/16" | 30 | Black/Blue | Anodized Aluminum | Plate | No | BOA Cognex Checker 100 Cognex In-Sight 5000 DALSA DVT Legend 500 Dataman 100/200 Keyence IV-500/150/2000 | Yes | 00000000 | 000000 |