Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

With a flexible layer of rubber sandwiched between an oil-embedded bronze bearing and rigid metal shell, these bearings reduce wear and machinery noise.

With extra iron and filled with oil containing slippery PTFE, these bearings support heavy loads that frequently start and stop along shafts. They’re sleeve bearings, so they handle loads parallel to the shaft.

Embedded with oil that is safe for incidental contact with food, these bearings are suitable for use in high-load applications such as bottling and filling lines in food processing plants. They are also known as Super Oilite® bearings.

A metal shell adds strength.

Made of FDA-listed materials or FDA compliant, these bearings are for use in food applications. They also withstand caustic and washdown environments.

These bearings stand up to a wider range of chemicals than other dry-running sleeve bearings.

A figure-8-shaped groove provides a flow path for lubricant, distributing it evenly along the bearing’s surface.

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

With oil for reduced friction and iron for added strength, these bearings handle frequent stops and starts in high-load applications.

Use where high loads and speeds are not required.

A slit running along the length of these bearings allows you to quickly slip them into a housing—no tools required.

An aluminum shell adds strength.

These bearings stand up to a wider range of chemicals than other dry-running flanged sleeve bearings.

The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

The oil in these bearings is suitable for incidental contact with food.

Handle heavy loads that frequently start and stop along shafts—these bearings contain extra iron and slippery PTFE lubricant. They’re thrust bearings, which means they support loads parallel to the shaft.

Graphite provides a layer of dry lubrication that operates in high-temperature environments.

A metal backing adds strength.

The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.

These nylon bearings swivel inside their housing to compensate for over 20° of shaft misalignment.

Embedded lubricant particles increase the load capacity of these bearings while also making them slippery.

Handling speeds twice as fast as standard mounted sleeve bearings while limiting wear on your system, these bearings are made of PTFE-filled acetal.

The tapered barrel on these bushings is split on both sides, allowing them to contract more tightly around the shaft than quick-disconnect and taper-lock bushings.

A mounting flange prevents movement during tightening, so it's easy to center these bushings in your sprocket.

These metal collars are stronger than plastic shaft collars.

Installing and removing a collar is as easy as pushing down and lifting up a clamp lever.

A threaded lever lets you tighten these collars with more torque than other quick-release styles, ensuring that they stay put on your shaft.

Suitable for use in washdown applications, these plastic collars also offer good chemical resistance.

Wider than standard shaft collars with twice the number of clamping screws, these ensure a better grip for greater holding power.

Make quick adjustments to these shaft collars with a lever on the side.

Two tapped holes on the face of these collars allow you to fasten them to gears, pulleys, and sprockets.

Secure items to either side of these collars—each half has a flat end with a tapped hole

When one of your shafts is undersized from wear, oversized from coatings, or uncommonly sized, machine one end of these couplings to fit. They clamp around your shafts for a secure hold that won’t cause damage.

These couplings have the gripping strength to handle higher torque than most other couplings.

These couplings have the gripping strength to handle higher torque than most other couplings.

Each hub includes a set screw (unless noted), which bites into your shaft to hold the coupling in place.

Safely connect slightly misaligned shafts near food lines—the spider on these couplings contains metal, so it’ll trigger a metal detector if a piece frays off and contaminates your batch.

Designed to grip evenly around your shaft, these couplings provide more holding power than set screw couplings without marring the shaft.

Connect shafts and ball screws to high-speed servomotors and stepper motors—these shaft couplings handle four times more speed than standard servomotor couplings.

Ridges on the inside of these bearings wipe away dust and debris as the bearing travels on a shaft.

A ceramic liner makes high speeds as well as rapid acceleration and deceleration possible.

Use ball bearings in debris-free environments and when speed is a necessity. They operate with less friction than sleeve bearings, so you can run them at higher speeds.

The choice for low-friction motion in high-temperature environments.

Sleeve bearings outperform ball bearings in dirty environments. Use them for low speed applications.

Ball bearings create less friction than sleeve bearings, so they require less force to operate.

Grooved on the inside, these bearings rotate with your spline shaft as they move loads up and down its length.