Bushings for 60mm Shafts

Filter by

System of Measurement

Shaft Diameter

6.000 mm to 10.000 mm

6.000 mm to 12.000 mm

6.000 mm to 16.000 mm

6.000 mm to 20.000 mm

7 mm

8 mm

9 mm

9.500 mm to 25.000 mm

9.500 mm to 30.000 mm

9.500 mm to 35.000 mm

12.500 mm to 40.000 mm

Length

Plain Bearing Type

Material

Flange OD

Shaft Mount Type

Shaft Type

Performance

For Load Direction

Combined Radial and Thrust

Thrust

Bearing Type

Ball

Plain

Dynamic Radial Load Capacity @ Speed

Minimum Temperature

For Housing ID

90.000 mm to 90.035 mm

Width

Lubrication

Dynamic Thrust Load Capacity @ Speed

9,500 lb. @ 30 rpm

10,300 lb. @ 30 rpm

Bushing Trade Number

RoHS

Compliant

Compliant with Exemptions

Not Compliant

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

Flange Thickness

REACH

29 Products

Flanged Sleeve Bearings

These bearings don’t come with a lubricant, so you can select the oil that meets the needs of your application. You’ll need to refill the oil, so make sure the bearing is located where you can access it. All are fabricated and inspected in the U.S.

Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

High-Load 932 Bearing Bronze—These bearings are strong enough for sudden starts and stops, plus they resist wear and tear. They are cast from an alloy of leaded tin bronze for uniform rigidity and strength. Also known as 660 leaded bronze bearings.

	For Housing ID, mm	Lg., mm	Flange OD, mm	Flange Thk., mm	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Temp. Range, ° F		Each
High-Load 932 Bearing Bronze



	60	70	50	80	5	18,600 lb. @ 30 rpm	10,300 lb. @ 30 rpm	-350 to 450	5448T35	000000


	60	70	60	80	5	22,300 lb. @ 30 rpm	10,300 lb. @ 30 rpm	-350 to 450	5448T595	00000

Quick-Disconnect (QD) Bushings


Clamp-On Shaft Mount

The screw connections on these bushings easily mate to compatible quick-disconnect sprockets and pulleys. Bushings fit quick-disconnect (QD) sprockets and pulleys of the same bushing trade number. As you tighten the included screws, the bushing grips the shaft and pulls it into the sprocket or pulley.

		Keyway, mm
	Overall Wd., mm	Wd.	Dp.	Fastener Tightening Torque, in·lbf	Material	Includes	For Shaft Dia., mm		Each
Clamp-On Shaft Mount







				Bushing Trade Number SF

				52	18	4.4	360	Cast Steel	Clamping Screws	60	2344K69	000000

Oil-Embedded Thrust Bearings

Our simplest-to-use thrust bearings, with no moving parts and no need to lubricate. Their porous surface releases oil over time, so you can install and forget them. While they run in most conditions, oil may drip away if temperatures climb too high. For extremely hot environments, consider graphite-lubricated bearings. All are fabricated, lubricated, and inspected in the U.S.

841 Bearing Bronze—A balance of strength and speed makes these bearings a good choice for most applications. Also known as SAE 841 bearing bronze.

Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away if the bearing heats up.

	OD, mm	Thk., mm	Dynamic Thrust Load Cap. @ Speed	Base Oil	Temp. Range, ° F		Each
841 Bearing Bronze



	60	90	5	9,500 lb. @ 30 rpm	Synthetic Oil	-35 to 300	2011N145	000000

Split-Tapered Bushings

Cast Iron

The tapered barrel on these bushings is split on both sides, allowing them to contract more tightly around the shaft than quick-disconnect and taper-lock bushings. They're for use with split-tapered sprockets and pulleys of the same bushing trade number. As you tighten the included screws, the bushing grips the shaft and pulls it into the sprocket or pulley.

Machine Key—Bushings with a machine key fit into a matching keyway on a sprocket or pulley for high-torque applications.

			Keyway, mm
	For Shaft Dia., mm	Overall Wd.	Wd.	Dp.	Taper	Fastener Tightening Torque, in·lbf		Each
Cast Iron







				Bushing Trade Number Q1 with Clamping Screws, Machine Key

				60	2 1/2"	18	4	3°	348	9859T772	000000

Flush-Mount Screw-Clamp Bushings

Insert these bushings into the bore of your sprocket for flush or recessed mounting. They handle shock loads. When you tighten the included clamping screws, the bushing's inner sleeve contracts onto the shaft and the outer sleeve expands to hold your sprocket, pulley, or gear. They can be mounted on shafts with or without keyways.

	OD, mm	Overall Wd., mm	Max. Torque, in·lbf	Fastener Tightening Torque, in·lbf	Includes		Each
Steel



	60	90	66	54,700	363	Clamping Screws	1070N19	0000000

Flange-Mounted Linear Ball Bearings

The flanged housing makes these bearings a good solution for vertical linear motion applications. All are for use with round end-supported shafts and have a fixed-alignment design for use where shaft misalignment is unlikely. End seals keep lubricant in and dirt out.

Fixed Alignment


Round Flange	Square Flange

		Overall, mm			Flange, mm				Load Capacity, lb.				Mounting Holes
	For Shaft Dia., mm	Lg.	Wd.	Ht.	Thk.	OD	Bolt Circle Dia., mm	OD, mm	Dynamic	Static	Temp. Range, ° F	For Shaft Material	No. of	Dia., mm		Each
Steel Bearings with Round Flange



		60	209	134	134	18	134	112	90	1,650	4,450	-4 to 176	Stainless Steel, Steel	4	11	6483K131	0000000


		Steel Bearings with Square Flange



				60	125	106	106	18	—	112	90	1,050	2,200	-4 to 176	Stainless Steel, Steel	4	11	6483K151	000000

Corrosion-Resistant Flush-Mount Screw-Clamp Bushings

Insert these nickel-plated steel bushings into the bore of your sprocket for flush or recessed mounting in wet environments. When you tighten the included clamping screws on these bushings, their inner sleeve contracts onto the shaft and their outer sleeve expands to hold your sprocket, pulley, or gear. This keeps bushings from slipping during sudden starts and stops.

	OD, mm	Overall Wd., mm	Max. Torque, in·lbf	Fastener Tightening Torque, in·lbf	Includes		Each
Nickel-Plated Steel



	60	90	32	24,800	360	Clamping Screws	5515N18	0000000

Set Screw Shaft Collars

Slide these traditional collars from one end of the shaft and tighten the set screw. They dig into the shaft for a secure hold, but one that leaves a gouge. For maximum holding power, make sure the set screw is harder than the shaft.

Zinc-Plated Carbon Steel—A step up from plain carbon steel collars, these withstand occasional exposure to moisture.

Blue Passivated Zinc-Plated Carbon Steel—Withstand moisture and mild chemicals better than standard zinc-plated-steel collars. The blue passivated finish makes it easy to identify metric collars at a glance.

Carbon Steel—Strong and easy to machine. Use in dry environments, since moisture will cause steel to rust.

303 Stainless Steel—Withstand moisture and mild cleaning solutions, such as acetone and ammonia. These are easier to machine than other stainless steel collars.

				Set Screw
	For Shaft Dia., mm	OD, mm	Wd., mm	Type	No. Included		Each
Blue Passivated Zinc-Plated Carbon Steel



		60	90	20	Hex Socket	1	6057N47	000000


		Carbon Steel



				60	90	20	Hex Socket	1	6056N47	00000


				303 Stainless Steel



						60	90	20	Hex Socket	2	6058N47	000000

High-Temperature Linear Ball Bearings

The choice for low-friction motion in high-temperature environments. Bearings are for use with round end-supported shafts and have a fixed-alignment design for applications where shaft misalignment is unlikely. To install, slide bearings into a housing (not included).

Fixed Alignment


With Retaining Ring Grooves

With Retaining Ring Grooves—For bearings with retaining ring grooves, secure with two retaining rings (sold individually).

	Bearings															Retaining Rings
								Load Capacity, lb.			Temp., ° F
	For Shaft Dia., mm	Overall Lg., mm	OD, mm	For Housing ID	With Retaining Ring Grooves	Retaining Ring Groove End-to-End Lg., mm	With End Seals	Dynamic	Static	Dynamic Load Cap. @ Temp.	Min.	Max.	For Shaft Material		Each	Pkg. Qty.		Pkg.
Steel Bearings with Steel Balls



		60	110	90	90.000 mm to 90.035 mm	Yes	85	No	1,050	2,200	1,050 lb. @ 230° F	-4	230	Stainless Steel, Steel	63255K93	0000000	1	98541A210	00000

Two-Piece Shaft Collars

For Round Shafts

For Keyed Shafts

Attach these collars anywhere along your shaft, which helps when other components are already installed or you can't access the end. They clamp firmly and evenly without marring the shaft, so you can reposition or remove collars later.

Black-Oxide Carbon Steel—Dark and matted for a finished look, but with minimal corrosion resistance. Best for dry environments.

Chrome-Plated Carbon Steel—Resist moisture and mild cleaning solutions better than zinc-plated collars.

Carbon Steel—Strong and easy to machine. Use in dry environments, since moisture will cause steel to rust.

303 Stainless Steel—Withstand moisture and mild cleaning solutions, such as acetone and ammonia. These are easier to machine than other stainless steel collars.

						For Round Shafts		For Keyed Shafts
				Clamping Screw				Keyway, mm
	For Shaft Dia., mm	OD, mm	Wd., mm	Type	No. Included		Each	Wd.	Dp.		Each
Black-Oxide Carbon Steel



		60	88	19	Socket Head	2	6063K35	000000	18	4.4	3390N28	0000000


		Chrome-Plated Carbon Steel



				60	88	19	Socket Head	2	3388N33	00000	—	—	———	0


				Carbon Steel



						60	88	19	Socket Head	2	9739T527	00000	—	—	———	0


						303 Stainless Steel



								60	88	19	Socket Head	2	3369K32	000000	—	—	———	0

Set Screw Flexible Shaft Couplings


Hubs, Split Spider, and Retaining Ring Shown Assembled	(Each Component Sold Separately)

Hubs and Spider Shown Assembled	(Each Component Sold Separately)

Each hub includes a set screw (unless noted), which bites into your shaft to hold the coupling in place. Also known as Lovejoy® couplings, these three-piece couplings have a spider-shaped cushion between two hubs to reduce shock and handle minor shaft misalignment.

A complete coupling consists of two hubs and one spider, or two hubs, one split spider, and one retaining ring (all components sold separately). Split spiders are easier to install and replace than standard spiders because there’s no need for tools or removing your hubs. Twist-lock them in place using a retaining ring.

Buna-N—Buna-N spiders provide good vibration damping and chemical resistance.

Hytrel—Hytrel spiders provide fair vibration damping and excellent chemical resistance.

Hubs							Buna-N Spiders								Hytrel Spiders
									Misalignment Capability								Misalignment Capability
Overall Lg., mm	OD, mm	For Shaft Type	For Rotary Motion	For Shaft Dia., mm		Each	Max. Rotation Speed, rpm	Max. Torque, in·lbf	Parallel	Angular	Temp. Range, ° F	Spider Material		Each	Max. Rotation Speed, rpm	Max. Torque, in·lbf	Parallel	Angular	Temp. Range, ° F	Spider Material		Each







			Steel Hubs

			137	127	Keyed	Forward/Reverse, Start/Stop	60	6133N23	0000000	4,200	2,340	0.015"	1°	-40 to 212	Buna-N	6408K62	000000	4,200	6,225	0.015"	0.5°	-55 to 245	Hytrel	6408K64	0000000

Shaft Collars

Slide these collars from one end of your shaft and tighten the clamping screw. They grip firmly and evenly without marring the shaft, so you can reposition or remove them later.

Black-Oxide Carbon Steel—Dark and matted for a finished look, but with minimal corrosion resistance. Best for dry environments.

303 Stainless Steel—Withstand moisture and mild cleaning solutions, such as acetone and ammonia. These are easier to machine than other stainless steel collars.

Aluminum—One-third the weight of steel and corrosion resistant.

				Clamping Screw
	For Shaft Dia., mm	OD, mm	Wd., mm	Type	No. Included		Each
Black-Oxide Carbon Steel



		60	89	19	Socket Head	1	57445K32	000000


		303 Stainless Steel



				60	89	19	Socket Head	1	9616T32	000000


				Aluminum



						60	89	19	Socket Head	1	9506T22	00000

Set Screw Two-Piece Shaft Collars

Attach these traditional collars anywhere along a shaft when other components are already installed or you can't access the ends. Their set screw digs into the shaft for a tight, permanent hold, but one that leaves a gouge. For maximum holding power, make sure the set screw is harder than the shaft.

Black-Oxide Carbon Steel—Dark and matted for a finished look, but with minimal corrosion resistance. Best for dry environments.

303 Stainless Steel—Withstand moisture and mild cleaning solutions, such as acetone and ammonia. These are easier to machine than other stainless steel collars.

				Set Screw		Clamping Screw			Each
	For Shaft Dia., mm	OD, mm	Wd., mm	Type	No. Included	Type	No. Included		1-24	25-Up
Black-Oxide Carbon Steel



		60	88	19	Hex Socket	1	Socket Head	2	1069N54	000000	000000


		303 Stainless Steel



				60	88	19	Hex Socket	1	Socket Head	2	1069N64	00000	00000

Two-Piece Shaft Collars with Wrench Flats

When adjusting or troubleshooting your drive shaft, turn these collars with a wrench to avoid marring or gouging the surface. To install, snap the two pieces together anywhere along the shaft, which helps when other components are attached or you can't access the ends.

Black-Oxide Carbon Steel—Dark and matted for a finished look, but with minimal corrosion resistance. Best for dry environments.

303 Stainless Steel—Withstand moisture and mild cleaning solutions, such as acetone and ammonia. These are easier to machine than other stainless steel collars.

					Clamping Screw
	For Shaft Dia., mm	OD, mm	Wd., mm	Flat-to-Flat Ht., mm	Type	No. Included		Each
Black-Oxide Carbon Steel



		60	88	19	83	Socket Head	2	9746T227	000000


		303 Stainless Steel



				60	88	19	83	Socket Head	2	5876T327	000000