Weld these nuts to stainless steel surfaces.

These nuts can be used in channels and tight spaces where round-base weld nuts won't fit.

These nuts have three mounting holes to accept screws and rivets for use with thin materials.

About twice as strong as aluminum rivet nuts, these steel rivet nuts are zinc plated for mild corrosion resistance.

These aluminum rivet nuts are one-third the weight of steel rivet nuts and have mild corrosion resistance.

Wedges under the flange lock the nut in place in soft materials such as brass and aluminum.

About twice as strong as aluminum rivet nuts, these rivet nuts are zinc plated for mild corrosion resistance.

About twice as strong as aluminum rivet nuts, these low-profile rivet nuts have a cadmium or tin-zinc plating for corrosion resistance.

The most corrosion resistant low-profile rivet nuts we offer, these stand up to chemicals.

A PVC foam seal under the flange keeps liquids and gasses from leaking between the nut and the surrounding material.

Stronger than stainless steel, these nuts are comparable in strength to Grade 9 bolts.

Made of 18-8 stainless steel, these inserts have good corrosion resistance.

The strongest key-locking inserts we offer, these inserts are made to stringent military specifications.

Made of Nitronic 60 stainless steel, these inserts prevent the screw from binding or sticking without any coating or lubricant that could contaminate particle-free environments.

Eliminating the need for primer, these inserts are coated to resist corrosion when installed in different materials.

Made of nickel alloy, these inserts are more resistant to acids and salt water than stainless steel inserts.

Made of Nitronic 60 stainless steel, these inserts prevent the screw from binding or sticking without any coating or lubricant that could contaminate particle-free environments.

Inserts come with a through-hole tap and installation tool.

Without a prong to break off and retrieve, these inserts are often used where debris could cause damage.

Made of 18-8 stainless steel, these inserts have better corrosion resistance than black-phosphate steel.

A closed-end tap, drill bit, and installation bit are included with these inserts.

Adhesive on both the internal and external threads keeps these inserts in place and holds screws tight.

These aluminum inserts are 70% lighter than brass inserts, electrically conductive, and nonmagnetic. They have good corrosion resistance, which is comparable to brass but not as good as stainless steel.

These 18-8 stainless steel inserts have better corrosion resistance than brass inserts and may be mildly magnetic.

70% lighter than stainless steel, these aluminum inserts are mildly corrosion resistant and nonmagnetic.

Install these inserts into plastic parts to create a secure base for fasteners.

These 18-8 stainless steel inserts have excellent resistance to chemicals and may be mildly magnetic.

Assortments include various sizes of tapping inserts for hardwood.

Large threads cut into softwood such as particleboard for a strong hold.

Steel inserts have high strength for durability.

These 18-8 stainless steel tee nut inserts have better corrosion resistance than zinc-plated steel tee nut inserts.

Ridges on the barrel of these inserts make them less likely to split hardwood than inserts with prongs. They're often used in wood that has been cut across the growth rings.

Knurls hold these inserts in hardwoods such as oak, maple, and walnut to prevent twisting.

An open end allows long screws and bolts to pass through the insert.

These 316 stainless steel anchors have excellent resistance to chemicals and salt water.

Drive these tools with a hammer to expand anchors.

Often referred to as four-way expansion anchors, these expand in four directions to resist loosening from vibration.

Select these bumpers for applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Twist these bumpers into a threaded hole.

These bumpers withstand temperatures up to 300° F, which is twice as high as our other load rated bumpers. Use them in applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, these bumpers absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Twist them into a threaded hole.

Select these bumpers for applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Mount these bumpers on a threaded stud.

An interlocking steel frame in these mounts prevents collapse, even if the rubber fails.

Well-suited to moist environments, these mounts have a stainless steel plate for excellent corrosion resistance.