Plastic Submersible Cord Grips
Able to resist most chemicals and withstand use underwater, these nylon grips are rated IP68 for protection from dusty environments and prolonged submersion. A rubber bushing and O-ring create a tight seal to prevent liquid from entering the connection. All are CE marked and TUV Rheinland certified, which means they meet European safety standards. Grips with UL certifications meet American safety standards, while those with C-UL and CSA certifications meet Canadian safety standards. Some also meet standards for marine vessels classed by DNV-GL.
Grips with metric threads meet IP69 for protection from high-pressure washdowns.
Each | ||||||||
|---|---|---|---|---|---|---|---|---|
| For Cord OD | For Knockout Trade Size | Temp. Range, °F | Features | Environmental Rating | Specifications Met | 1-9 | 10-Up | |
Metric Threads  | ||||||||
| 1.1"-1.53" | M63 | 0° to 175° | Nylon Plastic Locknut, Rubber O-Ring | NEMA 6, NEMA 12, IP66, IP68, IP69 | UL Listed, C-UL Listed, CE Marked, DNV-GL Type Approved, TUV Rheinland Certified, VDE Certified | 0000000 | 000000 | 000000 |
| 1.33"-1.77" | M63 | 0° to 175° | Nylon Plastic Locknut, Rubber O-Ring | NEMA 6, NEMA 12, IP66, IP68, IP69 | UL Listed, C-UL Listed, CE Marked, DNV-GL Type Approved, TUV Rheinland Certified, VDE Certified | 0000000 | 00000 | 00000 |
Screw-Down Sure-Grip Plastic Submersible Cord Grips
Tighten the screw-down clamp on these grips for superior pull-out resistance while relieving tension at connection points. Grips are rated IP68 for protection from prolonged submersion and IP69K for protection against high-pressure, high-temperature jets of water. A rubber bushing and O-ring create a tight seal to prevent liquid from entering the connection.
| For Cord OD | For Knockout Trade Size | Material | Temp. Range, °F | Features | Environmental Rating | Specifications Met | Each | |
Metric Threads | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1.45"-1.73" | M63 | Black Nylon Plastic | 0° to 155° | Rubber O-Ring, Nylon Plastic Locknut | IP68, IP69K, NEMA 4X, NEMA 6 | UL 94 V-0, CE Marked, DNV-GL Type Approved | 00000000 | 0000000 |
Low-Temperature Brass Submersible Cord Grips
Keep cords from coming loose and seal water out of enclosures in extremely cold labs and storage areas. Thanks to their plastic bushing and rubber O-ring, these grips withstand temperatures as low as -75° F. They’re NEMA and IP rated, so you can safely submerse them under water, though only for short periods of time. They also stand up to dust, weather, washdowns, and oil. Nickel plated, they resist corrosion. All of these grips relieve strain on your cord if it’s pulled, prolonging its life.
| For Cord OD | For Knockout Trade Size | Temperature Range, °F | Features | Environmental Rating | Specifications Met | Each | |
Metric Threads | |||||||
|---|---|---|---|---|---|---|---|
| 1.11"-1.53" | M63 | -75° to 210° | Nickel-Plated Brass Locknut, Rubber O-Ring | NEMA 4X, NEMA 6, NEMA 12, IP68 | CE Marked, UL Recognized Component, VDE Certified | 0000000 | 000000 |
| 1.34"-1.77" | M63 | -75° to 210° | Nickel-Plated Brass Locknut, Rubber O-Ring | NEMA 4X, NEMA 6, NEMA 12, IP68 | CE Marked, UL Recognized Component, VDE Certified | 0000000 | 00000 |
Brass Multi-Diameter Wet-Location Cord Grips
Modify these cord grips to get the right fit for your cord even when you don't know your exact cord diameter. They have a frame with a two-piece rubber insert that fits around cables with connectors. The insert is made of layers that you peel away until you reach the size that fits your cord. Grips are rated IP66, IP67, NEMA 4X, and NEMA 13. The frame is nickel-plated brass for corrosion resistance.
| For Cord OD | For Knockout Trade Size | Thread Type | For Max. Panel Thick. | Temp. Range, °F | Features | Specifications Met | Each | |
| 0.37"-1.28" | M63 | Metric | 0.16" | -40° to 140° | Nickel-Plated Brass Locknut, Two-Piece Blue Rubber Inserts | UL Listed | 000000 | 0000000 |
Stainless Steel Multi-Diameter Wet-Location Cord Grips
Modify these cord grips to get the right fit for your cord even when you don't know the exact diameter. They have a corrosion-resistant frame with a two-piece rubber insert that fits around cables with connectors. The insert is made of layers that you peel away until you reach the size that fits your cord. Grips are rated NEMA 4X and NEMA 13 for indoor and outdoor protection against corrosion, water projected from a hose, and oil/coolant spraying, and IP67 for temporary water submersion.
| For Cord OD | For Knockout Trade Size | Thread Type | For Max. Panel Thick. | Temp. Range, °F | Features | Specifications Met | Each | |
| 0.37"-1.28" | M63 | Metric | 0.16" | -40° to 140° | Stainless Steel Locknut, Two-Piece Blue Rubber Inserts | UL Listed | 000000 | 0000000 |
Wraparound Multi-Cord Grips
Attach a cord grip to cable without removing connectors and rewiring. These cord grips have a two-piece design to fit around cables with connectors. Choose a housing and then select inserts (sold separately). Inserts have a slit, eliminating the need to thread cable through them.
For Insert | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For No. of Inserts | For Knockout Trade Size | Ht. | Wd. | Size | Thread Type | For Max. Panel Thick. | Temp. Range, °F | Features | Environmental Rating | Specifications Met | Each | |
Gray Polycarbonate Plastic | ||||||||||||
| 4 | M63 | 0.83" | 0.83" | Small | Metric | 0.31" | -20° to 190° | Nylon Plastic Locknut, Rubber Gasket | NEMA 12, IP54 | UL Recognized Component, UL 94 V-0, C-UL Recognized Component, DNV-GL Type Approved | 0000000 | 000000 |
Round Wet-Location Multi-Diameter Multi-Cord Grips
Modify these cord grips to get the right fit for your cord even when you don't know the exact diameter. They have a metal frame with two-piece rubber inserts that fit around cables with connectors. The inserts are made of layers that you peel away until you reach the size that fits your cord.
Grips are rated NEMA 4X and NEMA 13 for indoor and outdoor protection against corrosion, water projected from a hose, and oil/coolant spraying, and IP66 and IP67 for protection from washdowns and temporary water submersion.
Stainless steel is more corrosion-resistant than brass.
Replacement inserts allow you to change cord sizes and configurations.
| For Total No. of Cords | For Cord OD | For Knockout Trade Size | Thread Type | For Max. Panel Thick. | Temp. Range, °F | Features | Environmental Rating | Each | |
Nickel-Plated Brass | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 4 | 0.14"-0.65" | M63 | Metric | 0.16" | -40° to 140° | Nickel-Plated Brass Locknut, Two-Piece Blue Rubber Inserts | NEMA 4X, NEMA 13, IP66, IP67 | 000000 | 0000000 |
| 9 | 0.14"-0.41" | M63 | Metric | 0.16" | -40° to 140° | Nickel-Plated Brass Locknut, Two-Piece Blue Rubber Inserts | NEMA 4X, NEMA 13, IP66, IP67 | 000000 | 000000 |
Stainless Steel | |||||||||
| 4 | 0.14"-0.65" | M63 | Metric | 0.16" | -40° to 140° | Stainless Steel Locknut, Two-Piece Blue Rubber Inserts | NEMA 4X, NEMA 13, IP66, IP67 | 000000 | 000000 |
| 9 | 0.14"-0.41" | M63 | Metric | 0.16" | -40° to 140° | Stainless Steel Locknut, Two-Piece Blue Rubber Inserts | NEMA 4X, NEMA 13, IP66, IP67 | 000000 | 000000 |
Low-Profile Submersible Break-Through Multi-Cord Grips
The face of these grips is flush with the cable-entry point for a seamless appearance. They have a thin, flexible seal that covers the holes until you push a cord through. Grips are rated IP66, IP68, NEMA 4X, and NEMA 12 for protection from continuous submersion, washdowns and oil/coolant splashing.
| Shape | For Cord OD (No. of Cords) | For Knockout Trade Size | Thread Type | For Max. Panel Thick. | Material | Temp. Range, °F | Features | Environmental Rating | Specifications Met | Each | |
For 9 Cords | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Straight | 0.13"-0.25" (1), 0.2"-0.4" (3), 0.35"-0.64" (4), 0.63"-0.87" (1) | M63 | Metric | 0.32" | Gray Nylon Plastic | -40° to 190° | Nylon Plastic Locknut | NEMA 4X, NEMA 12, IP66, IP68 | UL Recognized Component, UL 94 V-0, C-UL Recognized Component, DNV-GL Type Approved | 0000000 | 000000 |
For 13 Cords | |||||||||||
| Straight | 0.13"-0.25" (4), 0.2"-0.4" (4), 0.35"-0.64" (5) | M63 | Metric | 0.32" | Gray Nylon Plastic | -40° to 190° | Nylon Plastic Locknut | NEMA 4X, NEMA 12, IP66, IP68 | UL Recognized Component, UL 94 V-0, C-UL Recognized Component, DNV-GL Type Approved | 0000000 | 00000 |
For 14 Cords | |||||||||||
| Straight | 0.2"-0.4" | M63 | Metric | 0.32" | Gray Nylon Plastic | -40° to 190° | Nylon Plastic Locknut | NEMA 4X, NEMA 12, IP66, IP68 | UL Recognized Component, UL 94 V-0, C-UL Recognized Component, DNV-GL Type Approved | 0000000 | 00000 |
For 35 Cords | |||||||||||
| Straight | 0.13"-0.25" | M63 | Metric | 0.32" | Gray Nylon Plastic | -40° to 190° | Nylon Plastic Locknut | NEMA 4X, NEMA 12, IP66, IP68 | UL Recognized Component, UL 94 V-0, C-UL Recognized Component, DNV-GL Type Approved | 0000000 | 00000 |