Mount the hinge leaves to the surface of the door and the frame. These hinges are easy to install because they don't require cutouts (mortises).

Made of plastic with a metal additive, these hinges will set off metal detectors if a piece breaks off and falls into your line.

Thick leaves and a large diameter pin make these hinges good for use with heavy doors.

Plastic hinges are a lightweight alternative to metal hinges and provide smooth, silent operation.

Turn a set screw to adjust the door 1/8" up or down after it's hung.

Springs in these hinges with holes automatically swing doors and gates closed behind you.

After a light push on the door, springs in these hinges swing doors and gates fully open.

Use these hinges on lightweight screen and storm doors as well as small gates.

Plastic hinges are a lightweight alternative to metal hinges and provide smooth, silent operation.

A stop keeps these hinges open at a set angle; push past the stop to open them to 180°.

Remove the ring to pull out the pin.

Squeeze the hinge handles together to retract the pin and disconnect a door; release the handles and the pin snaps back.

To make reconnecting doors easier than other pull release quick disconnect hinges, these have a keeper that holds the pin in a retracted position.

Keep environments free of contaminants—with plastic hinge leaves and a metal pin, there's no metal-to-metal contact that can release particles as hinges open and close.

The hinge pin is permanently attached to the frame leaf so you can quickly lift the door off the hinge without removing the pin.

These hinges are made of metal.