We will reply to your message within an hour.
A slot in the side allows you to install and remove these washers without completely disassembling your joint.
Also known as E-style rings.
Also known as C-style and crescent rings, these rings have a small shoulder to fit in tight spaces.
These rings are reinforced to withstand faster rotation than other side‐mount retaining rings. Also known as reinforced E‐style rings.
Also known as bowed E-style rings, these have a curved design that works like a spring, taking up play for a tight hold.
Also known as poodle rings, these thick rings have "ears" that form a large retaining surface to withstand stronger forces than other side-mount retaining rings.
Thicker than standard external retaining rings, these rings withstand greater force.
Open these rings, pass them over the end of a shaft, and release to spring into the groove.
These rings meet military specification MS 16624.
No groove is required for these rings—their thick profile helps them grip the shaft.
For a smooth profile and better clearance than standard external retaining rings, the lugs on these rings point inward.
The curved design of these rings works like a spring, taking up play for a tight hold.
Also known as X-washers, place these rings into the groove and squeeze tight with pliers to form a 360° closure.
Often used with small engines, heavy equipment, and power transmission, these external retaining rings have speared ends to help you install and remove them.
Also known as flat-style speed nuts, these have a large surface to distribute loads better than standard and flanged external push rings.
Use these caps to hold components in place and protect shaft ends.
The wide flange provides better load distribution than standard external push rings and can be used to cover oversized holes. Also known as thread cutting nuts.
No groove required—press these rings onto the end of a shaft for a firm grip.
Slide these rings into place with one twist—no tools required—for applications with high thrust loads.
These coiled rings can be wound into place on a shaft without tools.
Thicker than standard spiral rings, these rings withstand greater forces.
Slide these rings into a groove near the end of the shaft and the tab locks them in place.
Also known as constant-section rings, these rings have open ends and a profile that does not taper like other external retaining rings. Use them with linear bearings on support rail shafts.
Slide these rings into place by hand with a single twist for applications with high thrust loads.
These coiled rings can be wound into place inside a bore or housing without tools.
These assortments include pliers to install external and internal rings.
Wind these retaining rings into a groove—no tools required for installation.
Assortments include pliers to install external and internal rings.
Assortments include pliers to install external rings.
Also known as E-Style and C-style rings, slide these into the groove from the side of the shaft. They provide a wider shoulder than other external retaining rings for a larger retaining surface.
Pull these rings open with retaining ring pliers, pass over the end of a shaft, and release to spring into a groove.
Align cabinets, doors, and windows with these shims. The horseshoe design fits around screws.
These shims are color-coded by thickness for easy identification. The horseshoe design fits around screws.
Clips on these shims hold them together when stacked, and they are color coded by thickness for easy identification. Designed to fit around screws, they are commonly used in window, door, and cabinet installations.
The slot lets you insert, remove, and adjust the shims without disassembling your machinery.
Be prepared with slotted shims in a variety of thicknesses. The slot lets you insert, remove, and adjust the shims without disassembling your machinery.
Use these thick shims to align cabinets, doors, and windows, or for other rough leveling.
These shims are color-coded by thickness for easy identification. The slot lets you insert, remove, and adjust the shims without disassembling your machinery.
Keep slotted shims in a variety of thicknesses on hand with these sets, which are color-coded by thickness for easy identification. The slot lets you insert, remove, and adjust the shims without disassembling your machinery.
These shims are scored so you can easily shorten them to the length you need. Designed to fit around screws, they are commonly used in window, door, and cabinet installations.
Slide these shims behind your door’s hinge to align it in the jamb.
Use a single shim on feet or positioning arms that are secured with multiple fasteners. The slots let you insert, remove, and adjust the shims without disassembling your machinery. Also known as finger shims.
Each set includes a variety of different thicknesses, so you can use multiple shims together to create a specific thickness or make minor adjustments.
The slot lets you install these rigid shims around screws.
The spring on one end of the tool holds the retaining ring in position for installation and the hook on the other end is for removal.