C1055 Steel | McMaster-Carr

Filter by

Material

Steel

1055 Carbon Steel

System of Measurement

Diameter

Length

End Type

Mechanical Finish

Shaft Motion

Edge Type

Hardness

Heat Treatment

Hardness Rating

Shaft Type

Surface Smoothness

Component

Export Control Classification Number (ECCN)

REACH

DFARS Specialty Metals

Exempt

RoHS

Compliant

Dynamic Load Capacity

Flange OD

Overall Length

Static Load Capacity

Center Height

Thread Length

124 Products

About Shafts

Smooth, hard, and wear resistant, these shafts work with linear bearings to reduce friction in manual and automated systems, such as those found in packing, machine tool, and material handling operations. All are turned, ground, and polished to tight diameter and straightness tolerances.

Steel shafts are generally stronger than aluminum and stainless steel shafts but not as corrosion resistant. Carbon steel shafts are good for general purpose use.

Surface smoothness—The lower the microinch value, the smoother the finish and the less friction and wear it will cause on the bearing.

For technical drawings and 3-D models, click on a part number.

Metric—1055 Carbon Steel

4 mm Dia. (Tolerance: -0.008 mm to 0 mm)
Lg., mm	Lg. Tolerance, mm	Straightness Tolerance	Surface Smoothness, microinch	Edge Type	Hardness Rating	Hardness	Heat Treatment		Each
200	-0.5 to 0.5	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	00000
400	-0.5 to 0.5	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	00000
5 mm Dia. (Tolerance: -0.008 mm to 0 mm)
200	-0.5 to 0.5	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	00000
400	-0.5 to 0.5	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	00000
600	-0.8 to 0.8	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	00000
800	-0.8 to 0.8	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	00000
1,200	-1.2 to 1.2	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	00000000	00000
6 mm Dia. (Tolerance: -0.008 mm to 0 mm)
200	-0.5 to 0.5	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	0000
400	-0.5 to 0.5	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	00000
600	-0.8 to 0.8	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	00000
1,200	-1.2 to 1.2	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	00000000	00000
8 mm Dia. (Tolerance: -0.009 mm to 0 mm)
200	-0.5 to 0.5	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	0000
400	-0.5 to 0.5	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	00000
600	-0.8 to 0.8	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	00000
800	-0.8 to 0.8	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	00000
1,200	-1.2 to 1.2	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	00000000	00000
10 mm Dia. (Tolerance: -0.009 mm to 0 mm)
200	-0.5 to 0.5	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	00000000	0000
400	-0.5 to 0.5	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	00000000	00000
500	-0.8 to 0.8	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	00000
1,000	-0.8 to 0.8	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	00000
12 mm Dia. (Tolerance: -0.011 mm to 0 mm)
200	-0.5 to 0.5	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	00000000	0000
400	-0.5 to 0.5	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	00000000	00000
500	-0.8 to 0.8	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	00000
1,000	-0.8 to 0.8	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	00000
1,200	-1.2 to 1.2	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	00000
1,500	-1.2 to 1.2	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	00000
2,000	-1.2 to 1.2	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	00000
15 mm Dia. (Tolerance: -0.011 mm to 0 mm)
200	-0.5 to 0.5	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	000000	0000
400	-0.5 to 0.5	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	000000	00000
500	-0.8 to 0.8	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	000000	00000
1,000	-0.8 to 0.8	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	00000
1,200	-1.2 to 1.2	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	00000
1,500	-1.2 to 1.2	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	00000
2,000	-1.2 to 1.2	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	00000
16 mm Dia. (Tolerance: -0.011 mm to 0 mm)
200	-0.5 to 0.5	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	00000000	0000
400	-0.5 to 0.5	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	00000000	00000
500	-0.8 to 0.8	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	00000
1,000	-0.8 to 0.8	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	00000
1,200	-1.2 to 1.2	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	00000
1,500	-1.2 to 1.2	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	00000
2,000	-1.2 to 1.2	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	000000
20 mm Dia. (Tolerance: -0.013 mm to 0 mm)
200	-0.5 to 0.5	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	00000000	00000
400	-0.5 to 0.5	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	00000000	00000
500	-0.8 to 0.8	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	00000
1,000	-0.8 to 0.8	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	00000
1,200	-1.2 to 1.2	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	00000
1,500	-1.2 to 1.2	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	00000
2,000	-1.2 to 1.2	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	000000
24 mm Dia. (Tolerance: -0.013 mm to 0 mm)
200	-0.5 to 0.5	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	00000
500	-0.8 to 0.8	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	00000
1,000	-0.8 to 0.8	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	000000
1,200	-1.2 to 1.2	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	000000
25 mm Dia. (Tolerance: -0.013 mm to 0 mm)
200	-0.5 to 0.5	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	00000000	00000
500	-0.8 to 0.8	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	00000
1,000	-0.8 to 0.8	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	00000
1,200	-1.2 to 1.2	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	00000
1,500	-1.2 to 1.2	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	000000
2,000	-1.2 to 1.2	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	000000
2,500	-2 to 2	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	000000
30 mm Dia. (Tolerance: -0.013 mm to 0 mm)
200	-0.5 to 0.5	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	00000000	00000
500	-0.8 to 0.8	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	00000
1,000	-0.8 to 0.8	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	000000
1,200	-1.2 to 1.2	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	000000
1,500	-1.2 to 1.2	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	000000
2,000	-1.2 to 1.2	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	000000
2,500	-2 to 2	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	000000
35 mm Dia. (Tolerance: -0.016 mm to 0 mm)
200	-0.5 to 0.5	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	00000000	00000
500	-0.8 to 0.8	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	00000
1,000	-0.8 to 0.8	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	000000
1,200	-1.2 to 1.2	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	000000
1,500	-1.2 to 1.2	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	000000
2,000	-1.2 to 1.2	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	000000
40 mm Dia. (Tolerance: -0.016 mm to 0 mm)
200	-0.5 to 0.5	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	00000000	00000
500	-0.8 to 0.8	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	00000
1,000	-0.8 to 0.8	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	000000
1,200	-1.2 to 1.2	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	000000
1,500	-1.2 to 1.2	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	000000
2,000	-1.2 to 1.2	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	000000
2,500	-2 to 2	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	000000
50 mm Dia. (Tolerance: -0.016 mm to 0 mm)
200	-0.5 to 0.5	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	00000000	00000
500	-0.8 to 0.8	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	000000
1,000	-0.8 to 0.8	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	000000
1,200	-1.2 to 1.2	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	000000
1,500	-1.2 to 1.2	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	000000
2,000	-1.2 to 1.2	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	0000000	000000
2,500	-2 to 2	0.03 mm per 300 mm	12	Chamfered	Very Hard	Rockwell C59	Case Hardened	000000	000000

Hollow Linear Motion Shafts

Shown with Bearing and Wiring (Not Included)

Lighter than solid shafts, hollow shafts reduce your total system weight and allow you to run various media such as electrical wiring, compressed air tubing, coolants, or lubricants through the center. These shafts are smooth, hard, and wear resistant, so they work with linear bearings to reduce friction in manual and automated systems, such as those found in packing, machine tool, and material handling operations. The exterior of these shafts is turned, ground, and polished to tight diameter and straightness tolerances. The interior is unfinished.

These shafts are hardened on the surface, so they stand up to repeated motion. All have chamfered ends to remove sharp edges and reduce damage to bearings, housings, and other components during installation.

Carbon steel shafts are strong and good for general purpose use.

Surface smoothness—The lower the microinch value, the smoother the finish and the less friction and wear it will cause on the bearing.

For technical drawings and 3-D models, click on a part number.

Metric—1055 Carbon Steel
Lg.	Lg. Tolerance	Dia. Tolerance	ID Tolerance	Surface Smoothness, microinch	Hardness Rating	Hardness		Each
12mm Dia. (4mm ID)
__	__	-0.018mm to 0mm	-0.2mm to 0.2mm	12	Very Hard	Rockwell C59	00000000	00
300mm	-0.5mm to 0.5mm	-0.018mm to 0mm	-0.2mm to 0.2mm	12	Very Hard	Rockwell C59	0000000	000000
500mm	-0.8mm to 0.8mm	-0.018mm to 0mm	-0.2mm to 0.2mm	12	Very Hard	Rockwell C59	0000000	00000
1,000mm	-0.8mm to 0.8mm	-0.018mm to 0mm	-0.2mm to 0.2mm	12	Very Hard	Rockwell C59	0000000	000000
16mm Dia. (7mm ID)
__	__	-0.018mm to 0mm	-0.15mm to 0.15mm	12	Very Hard	Rockwell C59	00000000	00
300mm	-0.5mm to 0.5mm	-0.018mm to 0mm	-0.15mm to 0.15mm	12	Very Hard	Rockwell C59	0000000	00000
500mm	-0.8mm to 0.8mm	-0.018mm to 0mm	-0.15mm to 0.15mm	12	Very Hard	Rockwell C59	0000000	00000
1,000mm	-0.8mm to 0.8mm	-0.018mm to 0mm	-0.15mm to 0.15mm	12	Very Hard	Rockwell C59	0000000	000000
20mm Dia. (14mm ID)
__	__	-0.021mm to 0mm	-0.7mm to 0.7mm	12	Very Hard	Rockwell C59	00000000	00
300mm	-0.5mm to 0.5mm	-0.021mm to 0mm	-0.7mm to 0.7mm	12	Very Hard	Rockwell C59	0000000	00000
500mm	-0.8mm to 0.8mm	-0.021mm to 0mm	-0.7mm to 0.7mm	12	Very Hard	Rockwell C59	0000000	000000
1,000mm	-0.8mm to 0.8mm	-0.021mm to 0mm	-0.7mm to 0.7mm	12	Very Hard	Rockwell C59	0000000	000000
1,500mm	-1.2mm to 1.2mm	-0.021mm to 0mm	-0.7mm to 0.7mm	12	Very Hard	Rockwell C59	0000000	000000
25mm Dia. (15.5mm ID)
__	__	-0.021mm to 0mm	-0.775mm to 0.775mm	12	Very Hard	Rockwell C59	00000000	00
300mm	-0.5mm to 0.5mm	-0.021mm to 0mm	-0.775mm to 0.775mm	12	Very Hard	Rockwell C59	0000000	00000
500mm	-0.8mm to 0.8mm	-0.021mm to 0mm	-0.775mm to 0.775mm	12	Very Hard	Rockwell C59	0000000	000000
1,000mm	-0.8mm to 0.8mm	-0.021mm to 0mm	-0.775mm to 0.775mm	12	Very Hard	Rockwell C59	0000000	000000
1,500mm	-1.2mm to 1.2mm	-0.021mm to 0mm	-0.775mm to 0.775mm	12	Very Hard	Rockwell C59	0000000	000000
30mm Dia. (18.2mm ID)
__	__	-0.021mm to 0mm	-0.91mm to 0.91mm	12	Very Hard	Rockwell C59	00000000	00
300mm	-0.5mm to 0.5mm	-0.021mm to 0mm	-0.91mm to 0.91mm	12	Very Hard	Rockwell C59	0000000	00000
500mm	-0.8mm to 0.8mm	-0.021mm to 0mm	-0.91mm to 0.91mm	12	Very Hard	Rockwell C59	0000000	000000
1,000mm	-0.8mm to 0.8mm	-0.021mm to 0mm	-0.91mm to 0.91mm	12	Very Hard	Rockwell C59	0000000	000000
1,500mm	-1.2mm to 1.2mm	-0.021mm to 0mm	-0.91mm to 0.91mm	12	Very Hard	Rockwell C59	0000000	000000
40mm Dia. (26mm ID)
__	__	-0.025mm to 0mm	-1.35mm to 1.35mm	12	Very Hard	Rockwell C59	00000000	00
500mm	-0.8mm to 0.8mm	-0.025mm to 0mm	-1.35mm to 1.35mm	12	Very Hard	Rockwell C59	0000000	000000
1,000mm	-0.8mm to 0.8mm	-0.025mm to 0mm	-1.35mm to 1.35mm	12	Very Hard	Rockwell C59	0000000	000000
1,500mm	-1.2mm to 1.2mm	-0.025mm to 0mm	-1.35mm to 1.35mm	12	Very Hard	Rockwell C59	0000000	000000

Support-Rail Shafts

These shafts include a support rail for a stable setup that eliminates bending and prevents linear bearings from rotating. Shafts have a smooth surface to reduce friction and wear on linear bearings—the lower the microinch value a shaft has, the smoother its finish and the less friction it will create. They are case-hardened to increase hardness and wear resistance on the surface of the shaft while allowing the center to remain soft for absorbing stresses caused by shifting loads. The edges are chamfered to remove sharp corners, reducing damage to bearings, housings, and other components during installation. All are turned, ground, and polished to tight diameter and straightness tolerances.

Two-piece shafts allow you to replace the shaft when it becomes worn.

Carbon steel shafts are stronger than aluminum shafts but not as corrosion resistant. These shafts balance high strength and good machinability, making them ideal for general purpose use.

For technical drawings and 3-D models, click on a part number.

Two Piece

					Mounting Hole
Lg.	Lg. Tolerance	Ctr. Ht.	O'all Wd.	End-to-Mount. Hole Lg.	Ctr.-to-Ctr. Lg.	Ctr.-to-Ctr. Wd.	Dia.	Mounting Fasteners Included	Surface Smoothness, microinch	Hardness Rating	Hardness		Each
Metric—1055 Carbon Steel
12mm Dia. (Tolerance: -0.011mm to 0mm)
600mm	-3mm to 3mm	28mm	43mm	37.5mm	75mm	29mm	4.5mm	No	12	Very Hard	Rockwell C60	00000000	0000000
1,200mm	-5mm to 0mm	28mm	43mm	37.5mm	75mm	29mm	4.5mm	No	12	Very Hard	Rockwell C60	00000000	000000
16mm Dia. (Tolerance: -0.011mm to 0mm)
600mm	-3mm to 3mm	30mm	48mm	50mm	100mm	33mm	5.5mm	No	12	Very Hard	Rockwell C60	00000000	000000
1,200mm	-5mm to 0mm	30mm	48mm	50mm	100mm	33mm	5.5mm	No	12	Very Hard	Rockwell C60	00000000	000000
20mm Dia. (Tolerance: -0.013mm to 0mm)
600mm	-3mm to 3mm	38mm	56mm	50mm	100mm	37mm	6.6mm	No	12	Very Hard	Rockwell C60	00000000	000000
1,200mm	-5mm to 0mm	38mm	56mm	50mm	100mm	37mm	6.6mm	No	12	Very Hard	Rockwell C60	00000000	000000
25mm Dia. (Tolerance: -0.013mm to 0mm)
1,200mm	-5mm to 0mm	42mm	60mm	60mm	120mm	42mm	6.6mm	No	12	Very Hard	Rockwell C60	00000000	000000
30mm Dia. (Tolerance: -0.013mm to 0mm)
1,200mm	-5mm to 0mm	53mm	74mm	75mm	150mm	51mm	9mm	No	12	Very Hard	Rockwell C60	00000000	000000

Ball Screw/Splines and Bearings

From one compact system, transmit linear or rotary motion or both at once (sometimes called spiral motion). Because of these different motions, these ball screw/splines and bearings create efficient, fluid movements in complex automated applications, such as pick-and-place robots.

The ball bearings move smoothly and precisely, even at high speeds. They're powered independently, so you can drive one bearing at a time or both together to coordinate movements.

The ball screw/splines are hardened on the surface, so they stand up to repeated motion. They’re also hollow, so you can run electrical wiring, compressed air tubing, coolants, or lubricant through their center.

For technical drawings and 3-D models, click on a part number.

Spline		Thread					Ball Screw Bearing				Ball Spline Bearing
Lg.	No. of	Lg.	Direction	ID, mm	Lg., mm	Root Dia., mm	OD, mm	Overall Lg., mm	Dynamic Load Cap., lbs.	Static Load Cap., lbs.	OD, mm	Overall Lg., mm	Dynamic Load Cap., lbs.	Static Load Cap., lbs.	Max. Dynamic Torque, in.-lbs.	Temp. Range, ° F		Each
Metric—1055 Carbon Steel
8mm Dia. (Tolerance: -0.015mm to 0mm)
200 mm	4	180 mm	Right Hand	3	200	7.44	19	28.5	240	400	16	25	330	580	17	5° to 176°	0000000	000000000
10mm Dia. (Tolerance: -0.015mm to 0mm)
300 mm	4	270 mm	Right Hand	4	300	9.27	23	34.5	380	600	21	33	600	1,100	34	5° to 176°	0000000	00000000
16mm Dia. (Tolerance: -0.018mm to 0mm)
500 mm	6	360 mm	Right Hand	11	500	15.15	32	40	870	1,610	31	50	1,590	2,830	277	5° to 176°	0000000	00000000