Eliminate slamming doors—push the door and these hinges slowly pull it closed.

With a 170° range of motion, these hinges are for doors that need to open wide.

Easier to install than other mortise-mount concealed cabinet hinges, these fit in two drilled holes.

To ensure a good fit, these hinges have screws for horizontal, vertical, and depth adjustments after installation.

When the cabinet door is closed, a portion of the frame leaf is exposed and the entire door leaf is hidden

Surface-mount these hinges to the side of a cabinet.

Hinge leaves fit into two cutouts (mortises) to mount flush with the door and frame.

Turn a set screw to adjust the door up or down after it's hung.

Plastic hinges are a lightweight alternative to metal hinges and provide smooth, silent operation.

Thick leaves and a large diameter pin make these hinges good for use with heavy doors.

Plastic hinges are a lightweight alternative to metal hinges and provide smooth, silent operation.

Turn a set screw to adjust the door 1/8" up or down after it's hung.

Plastic hinges are a lightweight alternative to metal hinges and provide smooth, silent operation.

The hinge pin is attached to the frame leaf so you can quickly lift the door off the hinge without removing the pin.

Plastic hinges are a lightweight alternative to metal hinges and provide smooth, silent operation.

A grease fitting makes these hinges easy to lubricate.

Tighten or loosen an adjustment screw to change the hinge resistance.

Eliminate slamming lids—these hinges hold lids open at their widest angle and then slowly pull them closed.

Springs in these hinges without holes automatically swing doors and gates closed behind you.

After a light push on the door, springs in these hinges swing doors and gates fully open.

Plastic hinges are a lightweight alternative to metal hinges and provide smooth, silent operation.

These hinges with holes are spring loaded—pull the handle to retract the pin and disconnect a door; release the handle and the pin snaps back.

A keeper holds the pin in a retracted position to make reconnecting doors easier than other pull-release quick-disconnect hinges.

To retract the pin and disconnect a door, squeeze the hinge handles together. Release the handles and the pin snaps back.

Lock these hinges open at any angle within their range of motion.

The mounting holes on these hinges form an industry-standard half-moon shape.

No need for oil or grease, these hinges are maintenance free. The mounting holes form an industry-standard half-moon shape.

Bearings allow these hinges to open and close doors smoothly. The mounting holes form an industry-standard half-moon shape.

Bearings allow these hinges to open and close doors smoothly.

A snap-on cover protects these hinges from tampering and creates a finished appearance.

The mounting holes form an industry-standard half-moon shape.

The hinge pin is permanently attached to the frame leaf so you can quickly lift the door off the hinge without removing the pin.

Keep environments free of contaminants—with plastic hinge leaves and a metal pin, there's no metal-to-metal contact that can release particles as hinges open and close.

Designed to wrap around the edge of the partition frame, these hinges provide a stronger hold than other toilet partition door hinges.

These hinges are made of metal.

Made of carbon fiber, these hinges are as strong as aluminum yet lighter in weight. All have leaves that are connected by a strip of flexible Kevlar instead of a pin.

Mounting slots allow door alignment adjustments during and after hinge installation.

The leaves of these hinges almost touch when the door is closed. They are often used in electrical enclosures for a tight seal.