A cushion covering the clamp reduces vibration and wear from clamp edges. Clamps surround lines of pipe, tubing, and conduit completely while holding them close to the mounting surface.

A molded cushion reduces vibration and wear from clamp edges, plus it provides a tighter fit around material than standard vibration-damping loop clamps.

These clamps completely surround single lines of pipe, tubing, and conduit while holding them close to the mounting surface.

Tighten the bolt for an exact fit around material. Clamps secure vertical pipes in sanitation drain applications and prevent them from coming in contact with the mounting surface.

Mount these ringbolts into a threaded hole, or use the nut for through-hole mounting. The pivoting ring allows material to move freely.

Also known as bridle rings, routing rings have an open-eye design that allows you to quickly install wire and cable.

Keep multiple bundles of wire and cable on separate hooks. The hooks have wide openings to allow access for installation, adjustment, and removal.

These plastic rings won't conduct electricity. Also known as distribution rings, they have a large opening for routing multiple cables. A smooth surface prevents damage to wire and cable.

Add a mounting plate to your U-bolt for a more secure hold at the mounting surface.

Mount these general purpose U-bolts into an existing bracket, or combine with a mounting plate for a secure hold at the mounting surface.

These fiberglass-reinforced polyurethane U-bolts have no metal parts, so they won't conduct electricity or cause metal-to-metal corrosion.

Reduce vibration and noise in your lines—a plastic cushion tightly grips pipe, tubing, and conduit to prevent movement. Nylon-insert locknuts grip the thread to resist loosening.

Mount to a surface to secure and route cable.

Secure multiple cable bundles with a single holder.

These mounts create space between a bundle and surface.

Attach these cable ties directly to a surface—no separate mount needed.

Identify bundles at a glance.

Whether you plan to change the bundle size or need a temporary hold, these ties have a release tab for removal and reuse.

These cable ties come with a material certificate with traceable lot number and product shelf life.

Use the built-in blade to remove excess length once these ties are secure.

The tail slots into the head to create a temporary loop to hold wires. Hook and unhook the loop to add additional wires before permanently cinching the tie.

The head of these cable ties is contoured to fit against pipe, tubing, and other round material for a tight fit.

These cable ties have a finely ribbed body and a metal-toothed head that allows them to adjust to the exact size of the material without slipping.

Protect sensitive electronic equipment from static buildup.

Often used as tamper seals and in tagging applications, these ties create a consistent loop size every time.

Use these plastic cable ties when detection and retrieval are essential, such as in food processing applications. Ties are brightly colored for visibility and contain a special compound that can be picked up by X-ray equipment and metal detectors.

A foam padded back combined with an extra-wide body protects sensitive bundles, such as fiber optic cable.

A foam padded back combined with an extra-wide body protects sensitive bundles, such as fiber optic cable.

These ties are less likely to crack and break from dryness than regular cable ties.

Attach with a screw or other fastener.

Stick these ties to any smooth, clean surface.

Take the guesswork out of identifying material—use the attached tag to label the bundle.

Ties are made from heat-resistant fabric to withstand high temperatures.

Bundle cables outdoors with these ties that withstand exposure to UV rays and water.

These ties stretch to hold material tightly without slipping.

Create a cable tie with a buckle—no sewing required.

Take the guesswork out of identifying material—use the attached tag to label the bundle.

These ties are flexible, reusable, and adjustable for delicate bundles or bundles that frequently change in size.

Keep a set of these differently sized cable ties on hand to use when you need them. They're flexible, reusable, adjustable.

Mount to a surface and add a beaded cable tie to secure a bundle.

Create custom-length ties for bundling delicate materials.

Formed to the shape of a round bundle, these ties close with a single twist of the top.

Ties come on a spool for use in a twist tie machine.

The softest of our twist ties, they have a cushioned outer layer for bundling delicate materials.

For use in the harshest environments, these ties withstand chemicals and UV rays.

The ripple in the body prevents over tightening and allows for expansion to protect material that frequently changes size, such as heat cable.

These ties are wide and flat for a no-slip grip.

Install these stud-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.

Use a new plug when installing a fitting on a different rope.

Install these swivel-hook-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.

Also known as socket-end swage fittings, install these stud-end fittings with a roller swage press for a strong, permanent hold.

Also known as socket-end swage fittings, install these eye-end fittings with a roller swage press for a strong, permanent hold.

Add a stud end to wire rope without having to fray the rope or use a compression tool.

Add a clevis end to wire rope without having to fray the rope or use a compression tool.

Compress the thin shank wall with a hand tool to attach these light duty eye-end fittings. They are also known as hand swage fittings.

Compress the thin shank wall with a hand tool to attach these light duty mounting-plate-end fittings. They are also known as hand swage fittings.

Feed the wire rope into the opening at the bottom of these hook-end fittings and through the body for a quick and simple installation.

Constructed with a saddle for both the long (live) end and the short (dead) end, these clamps apply equal pressure without crimping or crushing the wire rope, so orientation doesn't matter. Also known as fist grip wire rope clips.

Install these clamps without any specific orientation, slide the nut over the rope and tighten it onto the threaded halves with a torque wrench.

Kits include clamps and thimbles to support a wire rope loop and prevent it from fraying. Clamps must be oriented with the saddle on the long (live) end and U-bolt on the short (dead) end.

Create a loop by feeding the wire rope through the clamp and tighten the set screw to secure it in place. Loosen the set screw to quickly adjust the loop. Also known as Gripple rope clamps. They are for use in noncritical applications, such as fencing.

These compression sleeves are designed to meet lifting specifications.

Use these sleeves for non-lifting applications such as tethering, securing, and suspending.

Also known as standard-pattern thimbles, these provide better protection against fraying than light duty thimbles.

Also known as heavy-pattern thimbles, these can be used to reinforce the loop of a sling.

Secure a ball with shank to a flat surface.