Also known as master and sling links, a large inner diameter provides room to attach multiple connectors or legs on a sling.

Limit rope and chain movement with the narrow end of these links and attach multiple connectors to the wide end.

Hammer the pin through the center to assemble these links. They’re also known as hammer locks and sling links.

The flat side lets webbing and strapping lay flat, so they don’t slide and bunch.

Also known as quick links, these links thread closed by hand or with a wrench.

Use for three-sided connections. Flat sides ensure webbing and strapping lay flat, so they won't slide and bunch.

The twisted shape of these links prevents loads from rotating or knotting.

Drive the end through the eye using a ball peen hammer and then weld or flatten the extended end to close. These links are also known as cold shuts.

Also known as lap links or repair links.

Often used with transport chain, these links are good for binding, tying down, and pulling loads.

Hang, pull, and secure loads. These rings are good for general non-lifting applications.

The flat side allows you to connect webbing and strapping, so they lay flat and resist bunching.

Screw the pin into position by hand for quick installation and removal. They're for use in low-vibration applications where the shackle remains stationary.

A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles.

One end has a bolt fastened with a nut and cotter pin for a more secure connection than flush-pin connectors.

Screw the pin into position by hand for quick installation and removal. They're for use in low-vibration applications where the shackle remains stationary.

The strongest shackles we offer, these connectors have a pin with flush ends that prevents snagging and accidental disengagement.

For use in low-vibration applications where the shackle remains stationary.

More secure than screw-pin shackles, these shackles close with a bolt that’s fastened with a nut and a cotter pin.

Cotter pins secure each end of these shackles for temporary installations.

Minimize twisting and knotting of rope and chain.

Since their pin doesn’t stick out from their body, these shackles won’t snag or accidentally come undone. They have a twisted shape to prevent rope and chain from twisting and knotting.

A lip on the shackle keeps the pin from falling out when loosened.

Indentations in the shackle body hold the head of the pin in place once fastened.

The pin doesn’t stick out from their body, so these shackles won’t snag or accidentally come undone. They have a narrow opening that restricts the movement of wire rope and chain.

The bolt on these shackles is fastened with a nut and cotter pin, making them more secure than shackles with a screw pin. Also known as D-shackles, they have a narrow opening that restricts the movement of wire rope and chain.

Pull the collar to release the shackle from its locked position.

Attach a rope to the ring on the pin for remote release where access is limited. These shackes have a clevis end for making pivoting connections.

These have split rings that swing freely and pull from the center for easy alignment.

Use these to adjust the position of a fitting or an object under load and minimize twisting and knotting.

Minimize twisting and knotting of rope and chain and adjust the position of a fitting or an object under load.

Rotating for easy positioning before a load is applied, these minimize twisting and knotting of rope and chain.

Use these to adjust the position of a fitting or an object under load and minimize twisting and knotting.