These clamps must be oriented with the saddle on the long (live) end and the U-bolt on the short (dead) end. They’re also known as wire rope clips.

Install these clamps without any specific orientation, slide the nut over the rope and tighten it onto the threaded halves with a torque wrench.

Kits include clamps and thimbles to support a wire rope loop and prevent it from fraying. Clamps must be oriented with the saddle on the long (live) end and U-bolt on the short (dead) end.

Use in noncritical applications, such as fencing, where the strength of a forged clamp is not required. Install clamps so the saddle is on the long (live) end and the U-bolt is on the short (dead) end. They’re also known as wire rope clips.

Use these sleeves for non-lifting applications such as tethering, securing, and suspending.

These compression sleeves are designed to meet lifting specifications.

Also known as standard-pattern thimbles, these provide better protection against fraying than light duty thimbles.

The open-end design leaves more room for connections than other thimbles.

Add a stud end to wire rope without having to fray the rope or use a compression tool.

Install these eye-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.

Use a new plug when installing a fitting on a different rope.

Install these swivel-hook-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.

Install these clevis-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.

Feed the wire rope into the opening at the bottom of these eye-end fittings and through the body for a quick and simple installation.

Compress the thin shank wall with a hand tool to attach these light duty mounting-plate-end fittings. They are also known as hand swage fittings.

Compress the thin shank wall with a hand tool to attach these light duty stud-end fittings. They are also known as hand swage fittings.

Also known as socket-end swage fittings, install these stud-end fittings with a roller swage press for a strong, permanent hold.

Also known as socket-end swage fittings, install these clevis-end fittings with a roller swage press for a strong, permanent hold.

Secure a ball with shank to a flat surface.

Compress sleeves with less effort than standard compression tools.

Also known as seizing bands, these prevent fraying while cutting wire rope. Wrap the band around the wire rope and squeeze the flat end into the indented end.

Organize multiple lines of pipe, tubing, and conduit with one clamp. Wider than standard loop clamps, multiline loop clamps surround two lines of material to create a secure grip while holding the lines close to the mounting surface. A cushion covering the clamp reduces vibration and wear from clamp edges.

Compared to metal loop clamps, plastic loop clamps reduce wear on soft materials, such as tubing and cable. Clamps are nonconductive and noncorrosive.

Organize multiple lines of pipe, tubing, and conduit with one clamp. Wider than standard loop clamps, multiline loop clamps surround two lines of material to create a secure grip while holding the lines close to the mounting surface.

For use with a single line, these plastic clamps reduce wear on softer materials, such as tubing and cable, and prevent corrosion caused by metal-to-metal contact.

Backed with foam adhesive tape, these clamps mount to any smooth surface—no fasteners required. They are noncorrosive, nonconductive nylon.

Route two lines of tubing with a single clamp. Commonly used in compressed air systems, these polypropylene clamps withstand moisture and most chemicals. They have a folding arm that closes to secure material.

Flexible grooves inside these polypropylene clamps allow material to expand and contract. Clamps are moisture and chemical resistant.

Secure two pressurized hydraulic lines with a single clamp to lessen vibration in hydraulic systems. Weld the bottom plate onto the mounting surface for a more secure connection than rail- and adhesive-mount clamps.

For use with a single line, these clamps mount directly onto rails, no adhesive or welding required. They fit tightly around pressurized lines in hydraulic systems to lessen vibration.

Temporarily route material across duct, racks, machinery, and other ferrous surfaces. Clamps fit tightly around pressurized lines in hydraulic systems to lessen vibration. Rubber cushions reduce wear from clamp edges and protect lines from corrosion caused by metal-to-metal contact.

Mount parallel lines of pipe, tubing, or conduit directly against the mounting surface.

These mounts meet UL flammability requirements.

Often used to secure vertical running material, these mounts maintain space between a bundle and a surface.

Take the guesswork out of identifying material—use the attached tag to label the bundle.

These cable ties have a finely ribbed body and a metal-toothed head that allows them to adjust to the exact size of the material without slipping.

The head of these cable ties is contoured to fit against pipe, tubing, and other round material for a tight fit.

The rounded, low-profile head keeps these ties from snagging and allows them to fit in tight spaces.

For use in environments subjected to chemicals, these ties withstand the most corrosive conditions.

Secure and separate parallel bundles with the same tie.

Identify bundles at a glance.

These strong, wide ties are often used as an alternative to metal strapping.

A foam padded back combined with an extra-wide body protects sensitive bundles, such as fiber optic cable.

Pull the tab to tear off these cable ties.

Use these plastic cable ties when detection and retrieval are essential, such as in food processing applications. Ties are brightly colored for visibility and contain a special compound that can be picked up by X-ray equipment and metal detectors.

A foam padded back combined with an extra-wide body protects sensitive bundles, such as fiber optic cable.

These ties are less likely to crack and break from dryness than regular cable ties.

Reduce gaps between the cable tie and bundle—these ties have a smooth body that allows them to adjust to the exact size of the material.

Able to fit small bundles, these thin ties are more flexible than other ties.

Take the guesswork out of identifying material—use the attached tag to label the bundle.

Ties are made from heat-resistant fabric to withstand high temperatures.

These ties stretch to hold material tightly without slipping.

These ties meet UL flammability requirements.

Take the guesswork out of identifying material—use the attached tag to label the bundle.

These ties are flexible, reusable, and adjustable for delicate bundles or bundles that frequently change in size.

Quickly attach and detach a bundle.

Route and organize wire, cable, and hose along your DIN rail. Unlike zip ties, these cable ties can be temporarily undone to add or remove material.

Feed a bundle through the closed loop and wrap the ends around pipe or conduit for support.

The buckle allows you to cinch these ties tight.

Easily transport or hang cords, rope, and hose—these hook and loop cable ties include a handle.

Keep individual wires separate by laying them between the coils on these holders.

Add push-in cable holder to this adapter to mount cable to DIN rail.

Secure multiple cable bundles with a single holder.

Bend cable around these holders and let tension keep the bundle in place. They are often used on wire harness boards.

Bundle, close, and label bags and sacks.

These ties have a loop on each end that can be twisted around each other for a secure closure.

A hard rubber coating and wire core helps these ties maintain their shape.

Create strong and durable custom-length ties with a hard rubber coating and wire core.

For use in the harshest environments, these ties withstand chemicals and UV rays.

Identify bundles at a glance with these ties that are coated for an additional level of corrosion resistance.

Stamp or emboss these ties to identify material.

Use in light duty applications such as tagging and attaching documentation to equipment.

These stretchy ties conform to irregularly shaped bundles to grip material tightly.

Specify a message and starting number.

Specify a message and starting number.

Specify a message and starting number.

Specify a message and starting number.

Create custom-length seal tags using locks and wire.