We will reply to your message within an hour.
Mount to a surface and add a cable tie to secure a bundle.
Use these plastic mounts with metal-detector-grade cable ties when detection and retrieval is essential, such as in food processing applications. Mounts are brightly colored for visibility and contain a special compound that can be picked up by X-ray equipment and metal detectors.
These mounts meet UL flammability requirements.
For use in environments subjected to chemicals, these mounts withstand the most corrosive conditions.
Often used to secure vertical running material, these mounts maintain space between a bundle and a surface.
Mount to a surface to secure and route cable.
Add push-in cable holder to this adapter to mount cable to DIN rail.
Keep individual wires separate by laying them between the coils on these holders.
These mounts create space between a bundle and surface.
Secure multiple cable bundles with a single holder.
Grip delicate cables with these holders.
Bend cable around these holders and let tension keep the bundle in place. They are often used on wire harness boards.
Use these mounts with stainless steel cable ties when working in corrosive environments.
Add a hook and loop cable tie to these mounts to secure a bundle.
These clamps must be oriented with the saddle on the long (live) end and the U-bolt on the short (dead) end. They’re also known as wire rope clips.
These clamps have a forged fabrication and are reliable in critical applications. They are not for making slings. These must be oriented with the saddle on the long (live) end and U-bolt on the short (dead) end. They’re also known as wire rope clips.
Constructed with a saddle for both the long (live) end and the short (dead) end, these clamps apply equal pressure without crimping or crushing the wire rope, so orientation doesn't matter. Also known as fist grip wire rope clips.
Install these clamps without any specific orientation, slide the nut over the rope and tighten it onto the threaded halves with a torque wrench.
Kits include clamps and thimbles to support a wire rope loop and prevent it from fraying. Clamps must be oriented with the saddle on the long (live) end and U-bolt on the short (dead) end.
Use in noncritical applications, such as fencing, where the strength of a forged clamp is not required. Install clamps so the saddle is on the long (live) end and the U-bolt is on the short (dead) end. They’re also known as wire rope clips.
A clamp and thimble in one convenient fitting simplifies installation while providing support and fray protection to the wire rope loop. Use a torque wrench to tighten the clamp.
Create a loop by feeding the wire rope through the clamp and tighten the set screw to secure it in place. Loosen the set screw to quickly adjust the loop. Also known as Gripple rope clamps. They are for use in noncritical applications, such as fencing.
Make a removable loop without specialty tools for use in noncritical applications, such as fencing. Also known as tiller clamps.
Along with fencing, these staples can also be used to install suspended ceilings and to secure insulation.
Secure and insulate round signal wire such as data and communication wire.
These curved staples snuggly hold round signal wire such as coaxial cable and telephone wire.
Use these flat staples to secure romex cable.
Slide these clips on DIN rails—often used in equipment cabinet racks—to route and organize cables. Since these clips don’t require adhesive or screws, you can move them anywhere along the rail.