McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    54 Products

    Copper Foil Conductive Tape

    Image of Product. Front orientation. Conductive Tape. Copper Foil Conductive Tape.
    Use this tape to modify printed circuit boards, shield components from EMI/RFI (electromagnetic interference/radio-frequency interference), and prototype wiring-board layout and design. Made of copper, it resists chemicals better than aluminum foil electrical tape. Plus, you can solder it.
    Conductive Adhesive—Conductive adhesive makes easy electrical connections—charge travels both along and through the tape. Since it’s more conductive, it’s better at shielding against EMI than tape with electrically insulating adhesive.
    Electrically Insulating Adhesive—Tape with electrically insulating adhesive is only conductive on the surface, so electrical charge won’t travel through the tape. Choose it for shielding cables without creating unwanted electrical connections.
    Temp.,
    ° F
    Short Roll
    Long Roll
    Wd.
    Overall
    Thk.
    Adhesive
    Material
    Min.
    Max.
    Voltage
    Rating
    Specs.
    Met
    Mil. Spec.
    Lg.,
    ft.
    Each
    Lg.,
    ft.
    Each
    Electrically Insulating Adhesive
    1/4"0.0029"Acrylic Plastic
    		-40325Not RatedUL 510—1876555A7210000010876555A651000000
    1/2"0.0029"Acrylic Plastic
    		-40325Not RatedUL 510—1876555A7220000010876555A64800000
    3/4"0.0029"Acrylic Plastic
    		-40325Not RatedUL 510—1876555A7230000010876555A64900000
    1"0.0029"Acrylic Plastic
    		-40325Not RatedUL 510—1876555A7240000010876555A65200000
    2"0.0029"Acrylic Plastic
    		-40325Not RatedUL 510—1876555A7250000010876555A654000000
    3"0.0029"Acrylic Plastic
    		-40325Not RatedUL 510—1876555A7260000010876555A655000000
    6"0.0029"Acrylic Plastic
    		-40325Not RatedUL 510—1876555A73000000————0
     
    Conductive Adhesive
    1/4"0.0035"Acrylic Plastic
    		-40325Not RatedUL 510MIL-T-470121876555A711000005476555A64100000
    1/2"0.0035"Acrylic Plastic
    		-40325Not RatedUL 510MIL-T-470121876555A712000005476555A64200000
    3/4"0.0035"Acrylic Plastic
    		-40325Not RatedUL 510MIL-T-470121876555A713000005476555A64300000
    1"0.0035"Acrylic Plastic
    		-40325Not RatedUL 510MIL-T-470121876555A714000005476555A64400000
    2"0.0035"Acrylic Plastic
    		-40325Not RatedUL 510MIL-T-470121876555A715000005476555A646000000
    3"0.0035"Acrylic Plastic
    		-40325Not RatedUL 510MIL-T-470121876555A7160000005476555A647000000
    6"0.0035"Acrylic Plastic
    		-40325Not RatedUL 510MIL-T-470121876555A7190000005476555A731000000
     

    Build-Your-Own Wire Tamper-Evident Seals

    Create custom-length seals for large or oddly shaped items using a lock and wire. Cut the wire to the length you need, then insert the ends of the wire into the lock and use a seal press (sold separately) to close.
    Wire by the Spool
    Image of Product. Front orientation. Tamper-Evident Seals. Build-Your-Own Wire Tamper-Evident Seals, Wire.
    Wire
    Spool
    Lg.,
    ft.
    Copper
    Ga.
    Dia.
    Average Breaking
    Strength, lbf
    ID
    OD
    Each
    Copper
    25022
    		0.05"575/8"4"2013T28000000
    50022
    		0.05"575/8"5"2013T47000000
    1,00022
    		0.05"575/8"6"2013T46000000
     

    Wire Tamper-Evident Seals

    Thread the thin wire on these seals through small holes and around oddly shaped items. To seal, insert the loose end of the wire into the lock and use a seal press (sold separately) to close.
    Lead Lock
    Image of Product. Front orientation. Contains Annotated. Tamper-Evident Seals. Wire Tamper-Evident Seals, Lead Lock.
    Wire
    6" Open Length
    8" Open Length
    12" Open Length
    Lock
    Dia.
    Copper
    Ga.
    Dia.
    Average Breaking
    Strength, lbf
    Pkg.
    Qty.
    Pkg.
    Pkg.
    Pkg.
    Copper Wire
    5/16"22
    		0.05"571002011T7110000002011T7210000002011T741000000
    3/8"22
    		0.05"571002011T751000002011T761000002011T78100000
    7/16"22
    		0.05"571002011T791000002011T801000002011T82100000
    1/2"22
    		0.05"571002011T831000002011T841000002011T86100000
     

    Low-Outgassing Copper Foil Conductive Tape

    Image of Product. Front orientation. Conductive Tape. Low-Outgassing Copper Foil Conductive Tape.
    Tested to meet ASTM E595, a standard used by NASA, this tape releases almost no volatile emissions that could damage sensitive electronics, even in a vacuum. Use it to repair and prototype circuit boards and shield components from EMI/RFI. With a copper backing and conductive adhesive, it’s useful for making electrical connections—current travels both along and through the tape. Unlike aluminum tape, it can be soldered. It’s also better at resisting chemicals.
    Temp.
    1/2" Wide
    1" Wide
    Manufacturer
    Model Number
    Lg.,
    ft.
    Overall
    Thk.
    Material
    Adhesive
    Material
    Min.
    Max.
    Voltage
    Rating, V
    Specs.
    Met
    Color
    Each
    Each
    3M 1181540.0026"CopperAcrylic Plastic
    		Not RatedNot Rated600ASTM E595Copper9108N110000009108N12000000

    Mesh Conductive Tape

    Image of Product. Front orientation. Conductive Tape. Mesh Conductive Tape.
    This polyester tape has a woven mesh edge that conducts electricity. Use it to shield cables and electronic components from EMI (electromagnetic interference). When wrapping objects, tape should overlap half of its width to achieve a highly effective four-ply shielding.
    Temp.,
    ° F
    1" Wide
    Lg.,
    ft.
    Overall
    Thk.
    Material
    Edge Material
    Adhesive
    Material
    Min.
    Max.
    Voltage
    Rating
    Shielding Effectiveness
    @ Volume
    Color
    Each
    160.025"Aluminum, Polyester PlasticTin-Coated CopperAcrylic Plastic
    		-40345Not Rated1 MHz @ 65 dBSilver9270K11000000
    160.025"Copper, Polyester PlasticTin-Coated CopperAcrylic Plastic
    		-40345Not Rated1 MHz @ 70 dBSilver9270K2100000

    Fabric Conductive Tape

    Image of Product. Front orientation. Conductive Tape. Fabric Conductive Tape.
    Made of polyester fabric with a copper/nickel filler, this tape is highly conductive throughout, including the adhesive. Use it to shield cables and electronic components from EMI (electromagnetic interference).
    Temp.,
    ° F
    1" Wide
    2" Wide
    Lg.,
    ft.
    Overall
    Thk.
    Material
    Adhesive
    Material
    Min.
    Max.
    Voltage
    Rating
    Shielding Effectiveness
    @ Volume
    Color
    Each
    Each
    30.0048"Copper, Nickel, Polyester FabricAcrylic Plastic
    		-40155Not Rated10 MHz @ 95 dBGray3413A410000003413A42000000
    120.0048"Copper, Nickel, Polyester FabricAcrylic Plastic
    		-40155Not Rated10 MHz @ 95 dBGray3413A31000003413A3200000
    250.0048"Copper, Nickel, Polyester FabricAcrylic Plastic
    		-40155Not Rated10 MHz @ 95 dBGray3413A21000003413A22000000
    500.0048"Copper, Nickel, Polyester FabricAcrylic Plastic
    		-40155Not Rated10 MHz @ 95 dBGray3413A110000003413A12000000
    back to top