48V DC Cable | McMaster-Carr

Filter by

Electrical Connection Coding

Number of Poles

System of Measurement

End ID

End Type

Gender

Length

End Shape

Electrical Connection

Voltage

End OD

Application

Housing Thread Size

Current

Plug End ID

Wire Connection

Shape

Electrical Connection Component

Color

Number of Wires

REACH Compliance

RoHS Compliance

DFARS Compliance

Forward

How can we improve?

37 Products

Ethernet Cords with M12 Connectors

The M12 threaded ends on these cords seal out contaminants and resist coming loose from vibration better than the RJ45 ends on traditional Ethernet cords. Use them in tough, rugged environments to send high-speed data between sensors, switches, servers, computers, and PLCs not protected by control panels. These cords can power devices as they send data, as long as devices are Power over Ethernet (PoE) compatible. They are often used within Ethernet/IP, Profinet, and EtherCat systems. Their poles and keyways adhere to standard coding layouts, reducing the chance you’ll mismatch connections.

All cords are backward compatible, so they work in networks that meet the same or lower ethernet cable category. For example, a Category 6 cord will work in a Category 5 network, but it will only run at the Category 5 speed.

A- and X-coded cords send data faster than D-coded cords, so they’re good for robotics and multi-step programs.

With either TPE or polyurethane insulation, all cords stand up to harsh factory conditions, chemicals, and UV rays. All are also highly flexible, so they’re good for jobs with continuous motion, such as robotics. Oil-resistant polyurethane-insulated cords are free of halogen, so they’re safer than most plastic as they won’t release toxic fumes or corrode metal.

Double-shielded cords have layers of braid and foil that block signal interference from nearby devices, preventing impact to transmission speeds and data.

When mated, all cords are IP67 rated to protect against dust and temporary submersion.

Add caps to protect cords and maintain their IP ratings when not in use.

M12 Plug × M12 Plug

X-Coded Plug × X-Coded Plug

X Code

X-Coded—6A Ethernet Cable Category
Lg., ft.	No. of Poles	Transmission Speed	Wire Gauge	Cord OD	Specifications Met	Shielding	Shield Type	Temp. Range, °F	Environmental Rating	Cord Insulation Material	Color		Each
3	8	10 Gb/s	26	0.26"	UL Recognized Component	Double Shielded	Braid, Foil	-20° to 190°	IP67	Polyurethane Rubber	Green	0000000	000000
6	8	10 Gb/s	26	0.26"	UL Recognized Component	Double Shielded	Braid, Foil	-20° to 190°	IP67	Polyurethane Rubber	Green	0000000	00000
16	8	10 Gb/s	26	0.26"	UL Recognized Component	Double Shielded	Braid, Foil	-20° to 190°	IP67	Polyurethane Rubber	Green	0000000	000000
32	8	10 Gb/s	26	0.26"	UL Recognized Component	Double Shielded	Braid, Foil	-20° to 190°	IP67	Polyurethane Rubber	Green	0000000	000000

Caps

For Plugs

For Plugs
For Thread Size	Material	Includes		Each
M12	Anodized Aluminum	Lanyard	0000000	000000

Detachable-Cord AC to DC Adapters

IEC C8 Input and Barrel Output

IEC C14 Input and Barrel Output

IEC C14 Input and 4-Pin Output

IEC C14 Input with 6-Pin Output

Barrel Output

IEC C8 Input

Positive

IEC C14 Input

4-Pole 4-Pin Circular DIN Output

6-Pole Molex Mini-Fit Output

Couple these adapters with a cord that matches your outlet and length requirements to run DC-powered electronics. Instead of plugging directly into an outlet, the body of these adapters sits on the floor or other surface, so it remains out of the way and won’t block multiple outlets. These adapters use switching regulation—they produce the stated voltage even when your outlet’s power or the power drawn by your device fluctuates. Most have an LPS low-voltage output, so if something fails inside these adapters, they’ll limit the risk of electrical shocks. They meet U.S., Canadian, and European safety standards. Many also meet U.S. and European standards for energy efficiency.

When choosing an adapter, match the output voltage and polarity of your device. Look for the polarity illustration on your device or the adapter you're replacing. The current you choose should, at a minimum, match your device. You can choose a higher current, but it will not improve performance.

Adapters with an IEC C8 input require power cords with a C7 socket. With Class II shock protection, they have two levels of insulation that prevent electrical shocks.

Adapters with an IEC C14 input require power cords with a C13 socket. They have Class I shock protection and prevent electrical shocks with a combination of insulation and a protective ground.

Barrel/Pin Output Connection						Straight-Blade Input Connection
Voltage	Current, A	Polarity	End ID, mm	End OD, mm	End Shape	Voltage	Current, A	End Shape	Lg., ft.	Shock Protection Class	Protections Provided	Color		Each
IEC C8 Input × Barrel Output
48V DC	0.5	Positive	2.1	5.5	Straight	120V AC, 240V AC	0.58	Straight	5	II	Overcurrent, Overvoltage, Short Circuit	Black	00000000	000000
48V DC	0.75	Positive	2.1	5.5	Straight	120V AC, 240V AC	1	Straight	5	II	Overcurrent, Overvoltage, Short Circuit	Black	00000000	00000
48V DC	1.36	Positive	2.1	5.5	Straight	120V AC, 240V AC	1.4	Straight	5	II	Overcurrent, Overvoltage, Short Circuit	Black	00000000	00000
IEC C14 Input × Barrel Output
48V DC	0.5	Positive	2.1	5.5	Straight	120V AC, 240V AC	0.58	Straight	5	I	Overcurrent, Overvoltage, Short Circuit	Black	00000000	00000
48V DC	0.75	Positive	2.1	5.5	Straight	120V AC, 240V AC	1	Straight	5	I	Overcurrent, Overvoltage, Short Circuit	Black	0000000	00000
48V DC	1.36	Positive	2.1	5.5	Straight	120V AC, 240V AC	1.4	Straight	5	I	Overcurrent, Overvoltage, Short Circuit	Black	0000000	00000
48V DC	1.88	Positive	2.1	5.5	Straight	120V AC, 240V AC	1.2	Straight	5	I	Overcurrent, Overvoltage, Short Circuit	Black	0000000	00000
IEC C14 Input × 4-Pin Circular DIN Output
48V DC	3.3	__	__	__	Straight	120V AC, 240V AC	2.2	Straight	5	I	Overcurrent, Overvoltage, Short Circuit	Black	00000000	00000
48V DC	4.17	__	__	__	Straight	120V AC, 240V AC	2.8	Straight	5	I	Overcurrent, Overvoltage, Short Circuit	Black	00000000	000000
IEC C14 Input × 6-Pin Molex Mini-Fit Output
48V DC	5.2	__	__	__	Straight	120V AC, 240V AC	3.3	Straight	4	I	Overcurrent, Overvoltage, Short Circuit	Black	0000000	000000
48V DC	6.25	__	__	__	Straight	120V AC, 240V AC	3.9	Straight	5	I	Overcurrent, Overvoltage, Short Circuit	Black	00000000	000000

Medical-Grade AC to DC Adapters

IEC C8 Input and 4-Pole 4-Pin Circular DIN Output

IEC C14 Input and 4-Pole 4-Pin Circular DIN Output

IEC C14 Input and 6-Pole Molex Mini-Fit Output

IEC C14 Input and 10-Pole Molex Mini-Fit Output

4-Pole 4-Pin Circular DIN Output

IEC C8 Input

Positive

IEC C14 Input

6-Pole Molex Mini-Fit Output

10-Pole Molex Mini-Fit Output

To run DC-powered lab and medical equipment from your outlet, add a power cord with the plug style and length you need. These adapters meet strict IEC, UL, or ANSI/AAMI standards for use with medical devices. They also have a Means of Protection rating of 2xMOPP, which is the highest level of shock protection available for medical-grade power supplies, so in addition to using them with lab and medical equipment, you can use them with devices that come into contact with patients.

Unlike adapters with bodies that plug directly into an outlet, the body of these adapters rests on a desk or the floor, so it won’t block multiple outlets. Adapters with an IEC C8 input connection require power cords with a C7 socket. Those with an IEC C14 input connection require power cords with a C13 socket.

When selecting an adapter, make sure the DC voltage and amps for the pin output connection can handle the requirements of your device. Choosing a DC voltage and amps that are much higher than you need will not improve performance.

These adapters use switching regulation, which means they produce the stated voltage despite fluctuations in your outlet’s power and the power being drawn by your device. It also means they won’t get too hot.

If you exceed the maximum voltage or load, these adapters shut down to protect both the adapters and the connected equipment.

All of these adapters meet European safety standards. Adapters with Class II shock protection have two levels of insulation to prevent electrical shocks. Those with Class I shock protection prevent electrical shocks with a combination of insulation and a protective ground.

Barrel/Pin Output Connection
Voltage	Current, A	Polarity	End Shape	Voltage	Current, A	End Shape	Lg., ft.	Shock Protection Class	Protections Provided	Specifications Met	Color		Each
Nondetachable-Cord
IEC C8 Input × 4-Pole 4-Pin Circular DIN Output
48V DC	2.3	Positive	Straight	120V AC, 240V AC	1.3	Straight	3.28	II	Overload, Overvoltage, Overtemp, Short Circuit	CE Marked, 60950-1, IEC/ES/CSA/EN60601-1, IEC/UL/CSA/EN62368-1, IEC60601-1-11	Black	0000000	0000000
IEC C14 Input × 4-Pole 4-Pin Circular DIN Output
48V DC	3.4	Positive	Straight	120V AC, 240V AC	2.5	Straight	3.44	I	Overvoltage, Short Circuit	CE Marked, UL60601-1, EN60601-1, IEC60601-1	Black	0000000	000000
IEC C14 Input × 6-Pole Molex Mini-Fit Output
48V DC	5.2	Positive	Straight	120V AC, 240V AC	1.3	Straight	2.62	I	Overload, Overvoltage, Overtemp, Short Circuit	CE Marked, 60950-1, IEC/ES/CSA/EN60601-1, IEC/UL/CSA/EN62368-1	Black	0000000	000000
IEC C14 Input × 10-Pole Molex Mini-Fit Output
48V DC	3.3	Positive	Straight	120V AC, 240V AC	3	Straight	2.62	I	Overload, Overvoltage, Overtemp, Short Circuit	CE Marked, 60950-1, IEC/ES/CSA/EN60601-1, IEC/UL/CSA/EN62368-1, IEC60601-1-11	Black	0000000	000000

Barrel-Style DC Power Cords

Carry DC power in or out of electronic devices with these cords. All have industry standard barrel-style connections, letting you power electronics from power supplies. Link together multiple cords to carry electricity over long distances.

Plug × plug cords allow you to connect two devices that have female socket connections.

For technical drawings and 3-D models, click on a part number.

Plug × Plug

								Cord
Wire Gauge	Current, A	Voltage	End ID, mm	End OD, mm	End Lg., mm	Color	Lg., ft.	OD	Insulation Material	Temp. Range, °F		Each
20	8.5	48V DC	2.1	5.5	9.5	Black	6	0.12"	PVC Plastic	-10° to 155°	0000000	00000

90° Elbow Plug × 90° Elbow Plug

								Cord
Wire Gauge	Current, A	Voltage	End ID, mm	End OD, mm	End Lg., mm	Color	Lg., ft.	OD	Insulation Material	Temp. Range, °F		Each
20	8.5	48V DC	2.1	5.5	9.5	Black	3	0.12"	PVC Plastic	-10° to 155°	0000000	00000

Plug × Socket

			Plug			Socket				Cord
Wire Gauge	Current, A	Voltage	End ID, mm	End OD, mm	End Lg., mm	For Plug End ID, mm	For Plug End OD, mm	Color	Lg., ft.	OD	Insulation Material	Temp. Range, °F		Each
18	7	48V DC	2.1	5.5	12	2.1	5.5	Black	15	0.21"	PVC Plastic	-10° to 175°	0000000	000000
18	8	48V DC	2.5	5.5	12	2.5	5.5	Black	15	0.21"	PVC Plastic	-10° to 175°	0000000	00000

Barrel-Style DC Connectors

Made with industry standard barrel-style ends, these connectors carry DC power between electronic devices and power supplies.

Housing Connection—Pair connectors that have the same type of housing connection. Push-in connectors are quick to connect and disconnect.

Wire Connection—Choose based on your application. Wire leads come ready to connect and don’t require any preparation.

Receptacles—Mount them in a panel. Receptacles with an off (Normally Open) circuit position turn equipment on when you plug in a device.

Push-In Plugs with Wire Leads

Straight Push-In Plug with Wire Leads

									Cable					Black
End ID, mm	End OD, mm	End Length, mm	Number of Poles	Voltage	Current, A	Wire Lead Gauge	OD, mm	Lg., ft.	OD, mm	Color	Cable Lead Lg., ft.	Housing Material	Temp. Range, °F		Each
2.1	5.5	12	2	48V DC	7	18	9.6	6	5.2	Black	5.9	Plastic	-40° to 175°	00000000	00000
2.1	5.5	12	2	48V DC	8.5	18	9.6	15	5.2	Black	14.9	Plastic	-10° to 175°	00000000	00000
2.5	5.5	12	2	48V DC	7	18	9.6	6	5.2	Black	5.9	Plastic	-40° to 175°	00000000	0000
2.5	5.5	12	2	48V DC	8	18	9.6	15	5.2	Black	14.9	Plastic	-10° to 175°	00000000	00000

Push-In Receptacles with Wire Leads

Push-In Receptacle with Wire Leads

								Cable						Mounting Thread			Black
For Plug End ID, mm	For Plug End OD, mm	Number of Poles	Voltage	Current, A	Wire Lead Gauge	OD, mm	Lg., ft.	OD, mm	Color	Cable Lead Lg., ft.	Housing Material	Housing Thread Location	For Panel Cutout Dia., mm	Size	Pitch, mm	Temp. Range, °F		Each
Off (Normally Open)
2.1	5.5	2	48V DC	9	18	15	1	5.4	Black	1	Plastic	External	12	M12	1	-10° to 175°	0000000	000000
2.5	5.5	2	48V DC	8	18	15	1	5.4	Black	1	Plastic	External	12	M12	1	-10° to 175°	0000000	00000

Micro M12 Screw-Together Ethernet Connectors

Unlike traditional RJ45 connectors found in data centers, these connectors stand up to rugged industrial environments since they tightly thread to devices with M12 connections, sealing out contaminants and resisting shaking loose from vibration. Use them to transfer high-speed data between sensors, switches, computers, IO modules, programmable logic controllers (PLCs), and other equipment. They can also power devices as they send data, so you don’t need a separate power cord. But, the device must be Power over Ethernet (PoE) compatible. These connectors are often used with EtherNet/IP, Profinet, and EtherCAT systems. Since they’re shielded, they block signal interference from nearby devices, maintaining their speed and data integrity. Poles and keyways on the face adhere to standard coding layouts to reduce the chance you’ll mismatch connections.

When choosing an Ethernet connector, make sure you match or exceed your network’s category industry designation. These connectors are backward compatible—for example, a Category 6 connector will work in a Category 5 network, but it’ll only run at the Category 5 speed.

A-coded and X-coded connectors send data faster than D-coded connectors, so they’re best for robotics and other systems that run multi-step programs.

90° elbow connectors run your cord along the side of equipment, so they fit behind machines and in tight spaces.

Connectors with polyurethane or TPE insulation resist chemicals, oil, and sunlight for outdoor use. Because they’re flexible, they’re good for jobs with continuous motion, such as robotics.

IP rated connectors keep out dust and can be used in wet areas when mated or capped. IP67 connectors can be submerged temporarily.

Add caps to protect connectors and maintain their IP ratings when not in use.

Plugs with Wire Leads—External Thread

X-Code

X-Code Male

							Housing Thread
Number of Poles	Shielding	Wire Lead Gauge (No. of Wires)	Cable Outer Insulation Material	For Cable Industry Designation	Transmission Speed	Housing Material	Size	Pitch, mm	Temperature Range, °F	Environmental Rating		Each
3 ft. Lg. Cable Leads
X-Code
8	Shielded	26 (8)	Polyurethane Rubber	Category 5E, Category 6, Category 6A	10 Gb/s	Tin-Plated Copper	M12	1	-20° to 190°	IP67	0000000	000000
16 ft. Lg. Cable Leads
X-Code
8	Shielded	26 (8)	Polyurethane Rubber	Category 5E, Category 6, Category 6A	10 Gb/s	Tin-Plated Copper	M12	1	-20° to 190°	IP67	0000000	00000

90° Elbow Plugs with Wire Leads—External Thread

X-Code

X-Code Male

							Housing Thread
Number of Poles	Shielding	Wire Lead Gauge (No. of Wires)	Cable Outer Insulation Material	For Cable Industry Designation	Transmission Speed	Housing Material	Size	Pitch, mm	Temperature Range, °F	Environmental Rating		Each
3 ft. Lg. Cable Leads
X-Code
8	Shielded	26 (8)	Polyurethane Rubber	Category 5E, Category 6, Category 6A	10 Gb/s	Tin-Plated Copper	M12	1	-20° to 190°	IP67	0000000	000000
16 ft. Lg. Cable Leads
X-Code
8	Shielded	26 (8)	Polyurethane Rubber	Category 5E, Category 6, Category 6A	10 Gb/s	Tin-Plated Copper	M12	1	-20° to 190°	IP67	0000000	00000

Sockets with Wire Leads—Internal Thread

X-Code

X-Code Female

							Housing Thread
Number of Poles	Shielding	Wire Lead Gauge (No. of Wires)	Cable Outer Insulation Material	For Cable Industry Designation	Transmission Speed	Housing Material	Size	Pitch, mm	Temperature Range, °F	Environmental Rating		Each
3 ft. Lg. Cable Leads
X-Code
8	Shielded	26 (8)	Polyurethane Rubber	Category 5E, Category 6, Category 6A	10 Gb/s	Tin-Plated Copper	M12	1	-20° to 190°	IP67	0000000	000000
16 ft. Lg. Cable Leads
X-Code
8	Shielded	26 (8)	Polyurethane Rubber	Category 5E, Category 6, Category 6A	10 Gb/s	Tin-Plated Copper	M12	1	-20° to 190°	IP67	0000000	000000

Caps

For Plugs

For Sockets

For Plugs and Receptacles with External Threads
For Thread Size	Material	Includes		Each
M12	Anodized Aluminum	Lanyard	0000000	000000
For Sockets, Receptacles, and Adapters with Internal Threads
M12	Anodized Aluminum	__	0000000	00000