The enclosure on these jelly jar lights contains explosions, sparks, and flashes. These lights are safe to use in NEC Class I, II, and III, Division 1 hazardous locations. Certified to a T4 (275° F) or T5 (212° F) temperature classification, their surface stays cool enough to avoid igniting flammable material. They are also ETL and C-ETL listed to meet safety standards in the United States, Canada, and Mexico. All lights are hardwired and mount with fasteners (not included).

Lights with a built-in LED eliminate the need to swap out bulbs. They’re also more energy efficient and produce less heat than lights with an incandescent bulb. They're rated IP67 for protection against temporary submersion. Lights for incandescent bulbs are rated NEMA 4X for protection from washdowns and dust. Designed to resist corrosion from salt water, they’re also UL marine listed.

Designed to withstand heat and grease, these lights are often used in commercial cooking hoods. They are also known as hood lights. These fixtures work with LED, CFL, halogen, and incandescent bulbs (sold separately).

Lights with a guard protect the glass lens from breaking.

Also known as jelly jar lights, these lights are sealed to keep out humidity and dripping, splashing, and falling liquids. All are UL listed for wet locations. These lights have a heat-resistant lens. For impact protection, they have either a guard or a polycarbonate lens.

Lights with built-in LEDs have a frosted glass lens that reduces glare and protects against dust, damage, and scratches. They cast a neutral light often found in workspaces.

Lights for LED bulbs work with medium (standard household) screw-in base LED bulbs. Their tempered glass lens withstands impact better than a standard glass lens. However, the lens is clear, so it can create glare.

Retrofit kits convert existing fixtures to LED and eliminate the need for bulb changes. Remove your existing bulb, screw the adapter into the existing socket, and thread the new light into the housing—no tools required. You can discard the existing lens and guard. With a cool light appearance, they highlight white and blue tones for spaces that require high visibility.

Tough enough for offshore rigs and seafaring vessels—yet less than half the height of typical jelly jar lights. Built with a thick aluminum housing and a tough polycarbonate lens, these lights withstand hard impact without a guard. Rated IP66 and UL marine listed, these lights seal out water and resist the corrosive effects of salt water. They even meet ABS (American Bureau of Shipping) requirements for use on docks and ships.

A frosted lens evenly disperses light and reduces glare. Add a colored lens (sold separately) to use these lights as an indicator.

Install ceiling-mount lights using the included cord grip to seal out water during hardwiring. For wall-mount lights, use conduit or a cord grip (not included).

Use these with portable lights that use screw-in bulbs. They are not for use with insulated, wet-location, or hazardous location portable lights.

Light up large, open rooms where you need a quick setup and takedown, such as a room under construction. Just hang these lights from a ceiling up to 30' high and they’re ready to go. Connect up to 10 lights on a single circuit. The brighter the light, the further you should space them apart. All withstand humidity and moisture, so you can use them where it’s damp.

Lights with an outward beam direction have straight sides, so they’ll direct some light to the ceilings and walls of your facility. Rated IP64, they’re sealed against splashing liquid and dusty conditions.

Lights with a downward beam direction have angled sides, so they’ll direct more light towards the floor than lights with an outward beam direction.

A series of bulb heads are attached to a power cord to provide overhead lighting for jobsites. The cord has a plug on one end and a female connector on the other end, so you can connect multiple strings to illuminate larger areas. These lights have plastic-coated steel guards to protect the bulbs. Use them with medium-base, screw-in LED bulbs.

Lights with a NEMA L5-20 plug turn and lock together for a secure connection.

For lights that are 50 ft. long, use up to a 30W bulb when connecting multiple strings. For lights that are 100 ft. long, use up to a 15W bulb when connecting multiple strings.

Keep excess cords out of your way—the reel locks the cord at any length and retracts it when not in use. All of these lights have a hook for hanging when you need both hands for other work.

Style E have a zinc-plated steel guard to protect the bulb. Use them with medium-base, screw-in LED bulbs (sold separately). They double as an extension cord—plug a tool or other device into the outlet on the handle. You can mount them to your wall or ceiling with the included hardware.

Hang these lights where you need them on the job site.

Style D have a steel guard to protect the bulb from bumps and scrapes. Use them with standard household screw-in LED bulbs. You can plug a power tool or other electrical device into the side of the handle to avoid running another extension cord.

Style E work with a standard household screw-in LED spotlight or floodlight bulb. They have a steel guard to protect the bulb from bumps and scrapes.

Lights with an SJTW cord stand up to weather. Lights with an SJEOW cord resist oil and weather, and they’ll stay flexible in cold temperatures.

Light up damp areas—these lights seal out moisture and humidity. They’ll even work in areas with frequent washdowns. Rated NEMA 4X, they withstand spraying liquid, resist corrosion, and keep out dust. Use them with medium-base, screw-in CFL (compact fluorescent), halogen, incandescent, and LED bulbs (sold separately).

Tempered glass lenses are more durable than plastic lenses. They have a zinc-plated steel guard to protect them.

Flood hazardous areas with light—these lights are intrinsically safe, meaning they can’t cause an explosion or fire. Rated NEC Class I, II, III, and Zone 0, they’re safe to use in areas with ignitable concentrations of flammable or combustible gases, dust, and fibers. They’re often used in refineries, mines, and paint booths. Pivot their head up and down to direct light where you need it most. These lights are rechargeable, compact, and include a carrying case for easy transport to jobsites without power.

They’re durable enough to fall from 6 ft. and still work. The edges of the metal body are cushioned with rubber, and the lens is impact-resistant polycarbonate. Rated IP67, they are sealed against dust and water. You can drop them in water, and they’ll keep working. These lights are tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Mount them using the extendable swivel hook on the back or the magnet in the base. The hook also functions as a carrying handle. Add a tripod if there’s nowhere to mount the light and you need to position it higher than on the ground.

Our brightest plug-in floodlights, these lights illuminate large worksites—about the size of a hockey rink. Rated IP68, they’re dust- and watertight enough to handle being temporarily submerged in water, so torrential downpours and snowstorms won’t be a problem. Tilt the heads and adjust the height of the stand to direct light where you need it.

Style A lights are also known as balloon lights—they cast light in all directions through a fabric diffuser to reach a diameter of 200 ft. For focused light, remove the diffuser. They’re lightweight, weighing just 45 lbs., so you can move them around your site. Yet they’re sturdy enough to withstand winds of 30 mph with the diffuser on and 60 mph with the diffuser off.

Style B lights have four heads that rotate and pivot individually, so you can aim the light up to 160 ft. in whatever direction you choose. Once you raise the lights, you can rotate the mast to direct light. They’re stable enough to stand firm in 45 mph winds thanks to their sturdy steel frame. A single person can maneuver them, even through doorways. You cannot tow these lights. They have a power outlet at the base to plug in a tool or link up a second light.

An extension cord (sold separately) is required to power Style B lights. If you’re powering only one, use a cord with a NEMA 5-15 plug. If you’re powering two of these lights on one circuit or plan to plug in a power tool, use a cord with a NEMA L5-20 plug to power the first light. The light has inlets for both plug types.

Raise, lower, and tilt these lights to brighten your work in wet spaces. IP rated or ETL listed, they can handle wet environments.

Style B have detachable light heads, so you can bring light into areas where the stand won't fit. Tempered glass lenses protect the LEDs.

IP-rated lights are dust tight. IP65-rated lights are sealed to protect against light rinses.

A sealed head and switch keeps these lights shining in wet environments. They withstand dripping, splashing, and falling liquid. These lights swing out from the wall and adjust horizontally and vertically to illuminate loading docks and trailers. Rated IK10, these lights have the highest level of impact protection to withstand the accidental bumps and knocks that occur on loading docks. They’re also UL listed for wet locations.