Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together.

With cylindrical rollers to distribute load over a large surface area, these bearings are often used to support heavy loads at high speeds in applications such as power generation and metal recycling.

Thinner rollers allow these bearings to fit in tighter spaces than tapered-roller thrust bearings.

Found anywhere from machine tool spindles to conveyor rollers, these bearings have a two-piece design that allows for adjustment.

Two rows of rollers give these bearings load capacities over five times higher than comparably sized tapered-roller bearings.

Steel balls and washers allow these bearings to handle higher loads than bearings with stainless steel components.

These steel ball bearings handle higher loads than stainless steel and plastic bearings.

A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.

Wider than our standard ball bearings, these rugged bearings are good for handling heavy loads at low speeds.

Good for use in electric motors and power generators, these bearings have ceramic balls that insulate against stray current to prevent damage to the bearing.

Internal locking elements (sprags) lock to transmit torque in one direction while turning freely in the other direction.

With a spherical raceway and two rows of balls, these bearings compensate for shaft misalignment.

Made of PVDF, these bearings resist moisture absorption, so they won’t warp in underwater applications.

Made to tight tolerances, these 440C stainless steel bearings combine speed and accuracy with corrosion resistance.

Good for applications with incidental food contact, these 440C stainless steel bearings have a food-grade, solid polymer lubricant between the balls and race that eliminates the need for additional lubrication.

Bearings are 440C stainless steel for good corrosion resistance.

When speed and accuracy matter most, opt for these bearings. They’re made to tighter tolerances than standard flanged ball bearings.

Flanged and creating twice as many contact points as angular-contact ball bearings, these bearings ensure correct positioning within a tube or housing and resist radial loads.

Made with either PEEK or graphite, these ball bearings work in applications that are too hot for most other ball bearings.

Secure these bearings in washdown areas, such as food, beverage, pharmaceutical, and chemical plants, by tightening the set screw onto a shaft—no additional collar needed.

These bearings have twice as many contact points as angular-contact ball bearings.