Certification Certification |
|---|
|
Manufacturer Model Number Manufacturer Model Number |
|---|
Measures Measures |
|---|
|
Maximum Measurement Maximum Measurement |
|---|
|
|
|
Container Type Container Type |
|---|
|
Operating Mechanism Operating Mechanism |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
Battery Chemistry Battery Chemistry |
|---|
|
Electronic Thickness Gauges with Calibration Certificate
These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy. Use them to measure the thickness of sheet metal, paper, and other flat stock. All have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the gauge directly to your PC.
10-pin data cables (sold separately) connect the gauge to a Mitutoyo miniprocessor or multiplexer.
10-pin to USB adapters (sold separately) connect indicators to your PC through 10-pin data cables.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the gauge to your PC without being tethered by a cable.
Measuring Range | Accuracy | Measuring Increments | Anvil | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Throat Dp. | Face Dia. | Face Material | Batteries Included | Manufacturer | Manufacturer Model Number | Each | |
| 0"-0.47" | 0 mm-12 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 1 1/8" | 0.4" | Ceramic | Yes | Mitutoyo | 547-500S | 00000000 | 0000000 |
| 0"-0.47" | 0 mm-12 mm | ±0.00015" | ±0.0038 mm | 0.00005" 0.0001" 0.0005" | 0.001 mm, 0.01 mm | 3/4" | 0.25" | Carbide | Yes | Mitutoyo | 547-400S | 00000000 | 000000 |
Electronic Thickness Gauges for Pipe and Tubing with Calibration Certificate
These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy. They measure the wall thickness of pipe, tubing, and other curved surfaces. Zero-position memory, also known as absolute (ABS) positioning, retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. All have SPC data output to connect to a computer or data processor, but model 209-954 needs an SPC output adapter (sold separately) for SPC capabilities.
USB data cables (sold separately) connect gauges directly to your PC.
10-pin data cables (sold separately) connect gauges to a Mitutoyo miniprocessor or multiplexer.
10-pin to USB adapters (sold separately) connect gauges to your PC through 10-pin data cables.
Wireless data transmitters and receivers (sold separately) allow you to transmit measurement data from gauges to your PC without being tethered by a cable.
Measuring Range | Accuracy | Measuring Increments | Anvil | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Throat Dp. | Face Dia. | Face Material | Tip Shape | Spindle Tip Shape | Batteries Included | Manufacturer | Manufacturer Model Number | Each | |
With SPC Data Output | |||||||||||||||
| 0"-0.47" | 0 mm-12 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 3/4" | 0.14" | Steel | Round | Flat | Yes | Mitutoyo | 547-561S | 00000000 | 0000000 |
| 0"-1.97" | 0 mm-50 mm | ±0.002" | ±0.050 mm | 0.001" | 0.01 mm | 6 9/16" | 0.12" | Carbide | Ball | Ball | Yes | Mitutoyo | 209-954 | 0000000 | 000000 |
| For Manufacturer Model Number | Each | |
| 209-954 | 0000000 | 0000000 |
| For Manufacturer Model Number | Cord Length | Each | |
| 547-561S, 209-954 | 40" | 0000000 | 0000000 |
| For Manufacturer Series | Includes | Each | |
| U-WAVE-T | USB Cable | 000000 | 0000000 |
Electronic Thickness Gauges for Pipe, Tubing,
and Flat Surfaces with Calibration Certificate
This gauge comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy. A reversible anvil lets you adapt the gauge to the shape of the object you are measuring. Use the round face on the anvil to measure the wall thickness of pipe, tubing, and other curved surfaces. Use the flat face to measure sheet metal, paper, and other flat stock.
Zero-position memory, also known as absolute (ABS) positioning, retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the gauge directly to your PC.
10-pin data cables (sold separately) connect the gauge to a Mitutoyo miniprocessor or multiplexer.
10-pin to USB adapters (sold separately) connect indicators to your PC through 10-pin data cables.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the gauge to your PC without being tethered by a cable.
Measuring Range | Accuracy | Measuring Increments | Anvil | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Throat Dp. | Face Dia. | Face Material | Batteries Included | Manufacturer | Manufacturer Model Number | Each | |
| 0"-0.4" | 0 mm-10 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 1 3/16" | 0.236" | Steel | Yes | Mitutoyo | 547-312S | 00000000 | 0000000 |
Pocket Electronic Thickness Gauges with Calibration Certificate
This gauge comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy. Small enough to fit between your thumb and index finger, use it for quick thickness checks on paper, film, and other flat stock. It has zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button allows you to start measuring at any point.
Long-Reach Electronic Thickness Gauges with Calibration Certificate
This gauge comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy. An extra-deep throat provides a long reach for measuring sheet metal and other large items. It has zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the gauge directly to your PC.
10-pin data cables (sold separately) connect the gauge to a Mitutoyo miniprocessor or multiplexer.
10-pin to USB adapters (sold separately) connect indicators to your PC through 10-pin data cables.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the gauge to your PC without being tethered by a cable.
Measuring Range | Accuracy | Measuring Increments | Anvil | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Throat Dp. | Face Dia. | Face Material | Batteries Included | Manufacturer | Manufacturer Model Number | Each | |
| 0"-0.47" | 0 mm-12 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 4 3/4" | 0.4" | Ceramic | Yes | Mitutoyo | 547-520S | 0000000 | 0000000 |
Dial Thickness Gauges with Calibration Certificate
These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy. A loop handle allows you to comfortably hold them while operating the thumb lever.
For technical drawings and 3-D models, click on a part number.
Anvil | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Measuring Range | Accuracy | Measuring Increments | Measurement per Dial Revolution | Throat Dp. | Face Dia. | Face Material | Dial Face Color | Manufacturer | Manufacturer Model Number | Each | |
| 0"-0.05" | ±0.0002" | 0.0001" | 0.01" | 1 1/8" | 0.4" | Ceramic | White | Mitutoyo | 7326A | 000000 | 0000000 |
| 0"-0.5" | ±0.001" | 0.001" | 0.1" | 1 1/8" | 0.4" | Ceramic | White | Mitutoyo | 7300A | 000000 | 000000 |
| 0"-1" | ±0.002" | 0.001" | 0.1" | 1 1/8" | 0.4" | Ceramic | White | Mitutoyo | 7304A | 000000 | 000000 |
| 0mm-10mm | ±0.015 mm | 0.01mm | 1mm | 1 1/8" | 0.4" | Ceramic | White | Mitutoyo | 7301A | 0000000 | 000000 |
Starrett Pocket Dial Thickness Gauges with Calibration Certificate
These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy. They fit between your thumb and index finger for quick thickness checks on paper, film, and other flat stock. Operate by pulling the serrated finger slide to raise the spindle.
Go/No-Go Outside Diameter Gauges with Calibration Certificate
Dial Indicator
(Sold Separately)
With a calibration certificate traceable to NIST that says they've passed a test for accuracy, you can trust these gauges to confirm if your object's outer diameter is within tolerance. They're also known as snap gauges because they snap onto rods, shafts, and other cylindrical objects. To maintain their accuracy over time, they have a hardened steel frame and spindle that withstands flexing and temperature changes.
Attach dial indicators to measure the difference between your part’s actual diameter and the expected diameter. They also come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy.
For technical drawings and 3-D models, click on a part number.
Gauges | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Anvil Face | Dial Indicators | |||||||||||
| Measuring Range | Measuring Range Tolerance | Throat Dp. | Lg. | Wd. | Material | Frame Material | Manufacturer | Manufacturer Model No. | Each | Each | ||
| 0"-1" | 0.078" | 1/2" | 0.53" | 0.47" | Carbide | Steel | Mitutoyo | 201-151 | 0000000 | 0000000 | 0000000 | 0000000 |
| 1"-2" | 0.078" | 1" | 0.53" | 0.47" | Carbide | Steel | Mitutoyo | 201-152 | 0000000 | 000000 | 0000000 | 000000 |
| 2"-3" | 0.078" | 1 1/2" | 0.53" | 0.47" | Carbide | Steel | Mitutoyo | 201-153 | 0000000 | 000000 | 0000000 | 000000 |
| 3"-4" | 0.078" | 2" | 0.53" | 0.47" | Carbide | Steel | Mitutoyo | 201-154 | 0000000 | 000000 | 0000000 | 000000 |
| 4"-5" | 0.078" | 2 1/2" | 0.53" | 0.47" | Carbide | Steel | Mitutoyo | 201-155 | 0000000 | 000000 | 0000000 | 000000 |
| 5"-6" | 0.078" | 3" | 0.53" | 0.47" | Carbide | Steel | Mitutoyo | 201-156 | 0000000 | 000000 | 0000000 | 000000 |
| 0mm-25mm | 2mm | 12.5mm | 13.5mm | 12mm | Carbide | Steel | Mitutoyo | 201-101 | 0000000 | 000000 | 0000000 | 000000 |
| 25mm-50mm | 2mm | 25mm | 13.5mm | 12mm | Carbide | Steel | Mitutoyo | 201-102 | 0000000 | 000000 | 0000000 | 000000 |