1,500 mm Calipers | McMaster-Carr

Measure parts inside CNC machines and other places coated with coolant and cutting oil. The display and battery cover are tightly sealed, so spraying and dripping fluids won't seep in.

With an LCD display, these calipers give instant measurements—no need to count graduations. Swap between inch and metric or set the position to zero, all with the press of a button. You don't need to reset the zero point since they retain their position when turned off, also known as absolute (ABS) positioning.

Mitutoyo—The go-to for machinists and engineers. Every part of these calipers is made within Mitutoyo's automated system and tested in-house in Japan. Their jaws are laser cut to exact dimensions for the most reliable measurements.

McMaster-Carr Approved—The performance of brand-name calipers without the cost.

With SPC Data Output—Send measurements to a computer or data processor to store, analyze, and manage data. You'll need a data cable or SPC wireless transmitter and receiver.

Calibration Certificate—Choose these calipers when precision measurements are required for quality control or by regulation. The certificate is traceable to NIST, so you can be confident your measurements are correct and consistent.

Carbon Fiber Body—Despite their large size, these calipers are light enough to comfortably carry around the job.

	Measuring Range		Accuracy		Measuring Increments							Calipers		Calipers with Calibration Certificate
	Inch	Metric, mm	Inch	Metric	Inch	Metric, mm	Overall Lg.	Body Material	Jaw Material	Enclosure Rating	Mfr. Model No.		Each		Each
Mitutoyo







				With SPC Data Output

				0" to 60"	0 to 1,500	±0.004"	±0.10 mm	0.0005"	0.01	68 1/2"	Carbon Fiber	Stainless Steel	IP66	552-315-10	00000000	000000000	00000000	000000000


				McMaster-Carr Approved







								With SPC Data Output

								0" to 60"	0 to 1,500	±0.006"	±0.15 mm	0.0005"	0.01	69"	Carbon Fiber	Stainless Steel	IP65	—	00000000	00000000	———	0

Accessories and Replacements for Calipers

Mitutoyo Cords


Mitutoyo Data Out Switch A × 10-Pin Mitutoyo Connector	Mitutoyo Data Out Switch A × USB-A

USB-A Connection—Plug calipers with SPC data output directly into your computer.

10-Pin Mitutoyo Connector—Connect calipers with SPC data output to a Mitutoyo miniprocessor or multiplexer.

	Lg.		Each
Mitutoyo



	Mitutoyo Data Out Switch A × 10-Pin Mitutoyo Connector	40"	00000000	0000000


	Mitutoyo Data Out Switch A × 10-Pin Mitutoyo Connector	80"	00000000	000000
	Mitutoyo Data Out Switch A × USB-A	80"	000000	000000

	Connection	Lg., ft.


5-Pin SPC Connector × USB-A	7 1/2	00000000	0000000

SPC Wireless Transmitters

Mitutoyo Data Out Switch A Connection

Wirelessly send measurements from calipers with SPC data output to your computer. You’ll also need a receiver.

Electrical Connection	Mfr. Series		Each
Mitutoyo Data Out Switch A	U-WAVE-T	000000	0000000

SPC Wireless Receivers

Wirelessly send measurements from calipers with SPC data output to your computer. You’ll also need a transmitter.

	For Mfr. Series		Each
Mitutoyo



	USB-A	U-WAVE-T	000000	0000000

			1-9	10-49	50-Up
Replacement SR44 Silver Oxide Battery	00000000	Each	00000	00000	00000
Replacement CR2032 Lithium Battery	0000000	Pkg. of 1	0000	0000	0000