Help keep your sealed enclosure's contents safe from dust and water damage—these locks help maintain an enclosure's IP or NEMA rating for washdowns. All open with a slotted screwdriver, so they’re good for areas where you don’t want a complicated keying system.

Secure cabinet doors and other fixtures that have smaller-than-standard-diameter through holes. A gasket prevents water, dust, and dirt from getting into an enclosure through the lock. These locks open with a slotted screwdriver, so they’re great for a facility where you don’t want a complicated keying system.

The face of these locks has a red indicator that is visible when unlocked and hidden when locked. Also known as compression cam locks, they create a tighter hold than standard cam locks in high-vibration environments. These locks open with a slotted screwdriver, so they’re great for a facility where you don’t want a complicated keying system.

Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal. All open with a square key, so they're more secure than locks that open with a hex or slotted driver.

These locks open with a square key, so they're more secure than locks that open with a hex or slotted driver yet still match a common keying system for industrial enclosures and other machinery.

Secure enclosures that have smaller-than-standard-diameter through holes. These locks open with a square key, so they’re more protected than locks that open with a hex or slotted driver.

Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal. Since they lock with a hex key, these locks are great if you want to secure an enclosure with a simple keying system.

Install these locks in smaller-than-standard-diameter through holes on cabinet doors and file drawers. Also known as compression cam locks, they create a tighter hold than standard cam locks in high-vibration environments.

Spot when these locks are open with just a glance—a red indicator shows they're unlocked. Also known as compression cam locks, their cam seals more tightly against a door or drawer than a standard cam to reduce rattling from vibration.

Open these locks with a triangle key—it’s more secure than a hex key or screwdriver, yet still matches a common keying system for industrial enclosures and other machinery.

Designed for smaller-than-standard-diameter through holes, these locks are often installed in cabinet doors. They open with a triangle key, so they’re more secure than locks that open with a hex or slotted driver.

Open these locks with a two-way key. Also known as a double-bit key, it’s more secure than a hex key or screwdriver, yet still matches a common keying system for industrial enclosures and other machinery.

Help keep your sealed enclosure's contents safe from water damage—these locks help maintain an enclosure's IP or NEMA rating for low-pressure washdowns.

When installed on sealed assemblies, these locks guard against dust, dirt, and low-pressure washdowns. All are keyed alike, so they're best if you need several locks that open with the same key.

A gasket helps keep dust and low-pressure washdowns from entering through these locks. This helps you maintain your sealed enclosure's IP or NEMA rating. Press the button to pop the handle out; push the handle shut for a secure hold. Also known as compression cam locks, the lever on these locks creates a tighter hold than traditional cam locks.

Secure these locks with a Phillips screwdriver to keep a simple keying system around your facility. When you close them, a lever raises to tightly press your door or drawer shut with an attached screw.

Stop water from getting into your enclosure through the latch during low-pressure washdowns. These latches have a gasket that helps maintain your sealed enclosure's IP65 or NEMA rating.

It’s harder to snag straps and other items on these wing-handle latches than on T- or L-handle latches. Also known as compression cam latches, these create a tighter hold than a traditional cam latch, making them useful for doors that have a seal.

Install these latches on enclosure doors with smaller-than-standard diameter through holes. A gasket helps keep dust and low-pressure washdowns from entering through the latch. It’s harder to snag straps and other items on these latches than on T- or L-handle latches.

Fold the ring handle into the recess to stay out of the way when not in use. Also known as compression cam latches, these latches create a tighter hold than traditional cam latches, making them useful for doors that have a seal.