Help keep your sealed enclosure's contents safe from dust and water damage—these locks help maintain an enclosure's IP or NEMA rating for washdowns. All open with a slotted screwdriver, so they’re good for areas where you don’t want a complicated keying system.

These locks have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.

Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal. All open with a slotted screwdriver.

Install these locks on enclosure doors with smaller-than-standard diameter through holes. Also known as compression cam locks, these create a tighter hold than a traditional cam lock, making them useful for doors that have a seal.

Trigger a light, alarm, or other device to signal your door is unlocked.

Install these locks in smaller-than-standard-diameter through holes on cabinet doors and other fixtures.

Swap out the key that’s needed to open these locks for extra security.

These highly pick-resistant locks have specially designed half-moon keys that cannot be duplicated.

Use these locks in a 3/4" dia. through hole, which is the most common through-hole size.

These highly pick-resistant locks have specially designed half-moon keys that cannot be duplicated.

These sets come with four cam locks that are divided into two groups of two. Each group of cam locks opens with a specific key number. All open with the same master key.

These highly pick-resistant locks have specially designed half-moon keys that cannot be duplicated.

Without a keyway, you don't have to worry about these magnetic locks being picked or memorizing combinations. They are water-tight, so they resist snow, dirt, and other contaminants.

Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal. All open with a square key, so they're more secure than locks that open with a hex or slotted driver.

Quickly spot if these locks are open—a red indicator appears on the lock face or a spring-loaded cover pops up when they’re unlocked. Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal.

A spring-loaded bushing keeps your enclosure door from vibrating open. These locks combine the vibration resistance of a tight-hold lock with the simple operation of a quarter-turn cam lock.

Secure enclosures that have smaller-than-standard-diameter through holes. These locks open with a square key, so they’re more protected than locks that open with a hex or slotted driver.

For a simplified keying system, these cam locks open with a hex key (not included).

Install these locks in smaller-than-standard-diameter through holes on cabinet doors and file drawers. Also known as compression cam locks, they create a tighter hold than standard cam locks in high-vibration environments.

Spot when these locks are open with just a glance—a red indicator shows they're unlocked. Also known as compression cam locks, their cam seals more tightly against a door or drawer than a standard cam to reduce rattling from vibration.

Trigger a light, alarm, or other device to signal your door is unlocked. These locks open with a hex key for a simple keying system.

Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal.

An gasket helps keep high-pressure, high-temperature washdowns and dust from entering through the lock. This helps you maintain an IP69K rating on sealed enclosures that are often used in labs.

Mount these two-piece locks on sealed pressurized enclosures to gradually release pressure and prevent your door from bursting open.

A seal helps keep high-pressure, high-temperature washdowns and dust from entering through the lock. Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock.

Also known as compression cam locks, these locks create a tighter hold than traditional cam locks, making them useful for doors that have a seal.

An O-ring keeps water from entering through the lock during high-pressure, high-temperature washdowns. Also known as compression cam locks, these locks create a tighter hold than traditional cam locks, making them useful for doors that have a seal.

Quickly spot when your door is unlocked—the spring-loaded cover pops up when these locks are open. Also known as compression cam locks, they create a tighter hold than standard cam locks, so they’re often used in high-vibration areas.

Trigger a light, alarm, or other device to signal your door is unlocked.

Help keep your sealed enclosure's contents safe from water damage—these locks help maintain an enclosure's IP or NEMA rating for low-pressure washdowns.

A master key opens all of these locks, which also have their own unique keys.

A hex key (not included) opens and closes these cam locks, simplifying your keying system. Also known as quarter-turn locks, they have a cam that rotates 90° to lock cabinet doors and other enclosures.

The attached metal arm rotates to lock cabinet doors and file drawers. These locks are keyed alike, so they’re good for when you need several locks that open with the same key.

Lift the handle and turn it a quarter-turn to close, then push it down to reach full compression for a secure hold. Also known as compression cam locks, these locks create a tighter hold than standard cam locks on cabinet doors and file drawers in high-vibration environments, making them useful for doors that have a seal.

Open these locks with both a master key and their own unique key.

Fold the ring handle into the recess to stay out of the way when not in use.

Fold the ring handle into the recess to stay out of the way when not in use. Also known as compression cam latches, these latches create a tighter hold than traditional cam latches, making them useful for doors that have a seal.

A gasket helps keep dust and low-pressure washdowns from entering through these locks. This helps you maintain your sealed enclosure's IP or NEMA rating. Press the button to pop the handle out; push the handle shut for a secure hold. Also known as compression cam locks, the lever on these locks creates a tighter hold than traditional cam locks.

To help maintain a sealed enclosure's IP65 and NEMA 4 rating, these locks have a gasket that prevents water from getting past the lock during low-pressure washdowns. Press the button to pop the handle out; push the handle shut for a secure hold. Since they lock with a hex key, these locks are great if you want to secure an enclosure with a simple keying system.

Help maintain your sealed enclosure’s IP65 and NEMA 4 ratings—these locks have a gasket that prevents water from getting past the lock during low-pressure washdowns. Press the button to pop the handle out; push the handle shut for a secure hold. These locks close with a slotted screwdriver, so they’re ideal for keeping a simple keying system.

Stop burglars from breaking in with saws, screwdrivers, pliers, and other common tools—these locks meet RC2 security standards. Often installed on server cabinets and electrical panels, they have a handle that swings smoothly when you lift it to latch and unlatch the door.

Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal. It’s harder to snag straps and other items on these wing-handle locks than on T- or L-handle locks. Choose them if you need several locks that open with the same key.

Wire these locks to a card reader, manual release button, or other access system to remotely open an enclosure door. In case of an emergency, manually open these locks with a key.

Install these locks on enclosure doors with smaller-than-standard diameter through holes. It’s harder to snag straps and other items on these wing-handle locks than on T- or L-handle locks. Choose them if you need locks that each open with a different key.

Use these latches with three-point locking systems, such as those on filing cabinet doors.

Stop water from getting into your enclosure through the latch during low-pressure washdowns. These latches have a gasket that helps maintain your sealed enclosure's IP65 or NEMA rating.

A gasket helps keep dust and water from washdowns from entering through the latch. It’s harder to snag straps and other items on these wing-handle latches than on T- or L-handle latches.

Install these latches on cabinet doors and file drawers with smaller-than-standard diameter through holes. The wing handle makes it harder for clothing and straps to snag on them than cam latches with a T- or L-handle.

Install these latches on enclosure doors with smaller-than-standard diameter through holes. A gasket helps keep dust and low-pressure washdowns from entering through the latch. It’s harder to snag straps and other items on these latches than on T- or L-handle latches.

Secure enclosure doors with these T-handle latches. All have a cam that rotates to keep doors closed.

Lift the handle and turn it a quarter-turn to latch, then push it down for a tight hold that resists vibration.

Fold the ring handle into the recess to stay out of the way when not in use.

Fold the ring handle into the recess to stay out of the way when not in use. Also known as compression cam latches, these latches create a tighter hold than traditional cam latches, making them useful for doors that have a seal.

These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.

The knob on these latches is easy to grip and less likely to snag straps or clothing than T- or L-handle latches. Also known as compression cam latches, these latches create a tighter hold than a traditional cam latch, so they’re useful for doors with a seal.

Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold. Fold the paddle handle into the recess to keep it out of the way when not in use.

Grip and turn the ring handle to open and close doors and drawers, then fold it out of the way when you are done.

Often installed on sealed server cabinets and electrical panels, these latches have a gasket that prevents water, dust, and dirt from getting through the latch. Lift their handle and it swings smoothly to latch and unlatch the door.

To help keep the contents of a sealed enclosure safe from water damage, these padlockable latches help maintain the enclosure's IP or NEMA rating for low-pressure washdowns.

For a secure hold, lift the handle, turn it a quarter-turn to close, and then push it down to reach full compression. Also known as compression cam locks, these locks create a tighter hold than traditional cam locks, making them useful for doors that have a seal.

A hex key opens these locks, making them great for a facility where you don’t want a complicated keying system. Add a padlock for extra security.

A gasket helps keep dust and water from washdowns or brief submersions from entering through the latch. It’s harder to snag straps and other items on these wing-handle latches than on T- or L-handle latches.

Help keep your sealed enclosure's contents safe from dust and water damage—these locks help maintain an enclosure's IP or NEMA rating for low- or high-pressure washdowns. Often installed on electrical panels, these locks have a handle that swings smoothly when you lift it to latch and unlatch the door.

Open these locks with a triangle key (sold separately)—it’s more secure than a hex key or screwdriver. Often installed on server cabinets and electrical panels, these locks have a handle that swings smoothly when you lift it to latch and unlatch the door. Add a padlock for extra security.

Secure these latches with a padlock.

To fit in tight areas, these latches have a knob instead of a handle. Add a padlock for extra security.

More secure than locks that open with a hex or slotted driver, these locks open with a square key. Add a padlock for extra security.

Set a combination and reset it at any time.

Give multiple people access to secured items or equipment in washdown areas without requiring keys. A gasket prevents low-pressure washdowns, dust, and dirt from getting into an enclosure through the lock.