Press the button and the handle snaps open; push the handle shut for a secure hold. Also known as compression cam latches, these locks anchor your door shut using a lever with a screw at the end instead of a standard cam. Turn the screw to adjust the latching distance and tension. The handle folds into a recessed position to stay out of the way. Choose them if you need several locks that open with the same key.

Nylon plastic locks work well in damp and humid environments. They have a stainless steel shutter that blocks rain, snow, and dirt from entering the cylinder, preventing internal damage.

For technical drawings and 3-D models, click on a part number.

Often installed on server cabinets and electrical panels, these locks have a handle that swings smoothly when you lift it to latch and unlatch the door. The handle lies flat when locked, which means it won’t snag anything passing by. All have a cam that rotates to keep doors closed. Choose these locks if you need several locks that open with the same key.

Locks with a fixed latching distance are best when you know the precise distance you need. Since you won’t have to adjust the cam into position, these are faster to install than those with an adjustable latching distance. All include multiple cams, so you can change the fixed latching distance.

Locks with an adjustable latching distance handle a wide range of latching distances, so they’re best for tasks when precise distances are unknown. Adjust the position of the cam before you begin to install them.

Stainless steel and plastic locks are more corrosion resistant than zinc locks. They won’t corrode in areas that are constantly exposed to moisture. Plastic locks are also nonconductive and lighter in weight. However, they’re easier to drill into or tamper with than metal locks.

Locks with a stainless steel shutter block rain, snow, and dirt from entering the lock cylinder, which can cause internal damage. These locks also help keep your sealed enclosure's contents safe from water damage because they help maintain an enclosure's IP rating for low-pressure washdowns.

Padlockable locks can be used with a padlock for extra security.

For technical drawings and 3-D models, click on a part number.

Stop burglars from breaking in with saws, screwdrivers, pliers, and other common tools—these locks meet RC2 security standards. Often installed on server cabinets and electrical panels, they have a handle that swings smoothly when you lift it to latch and unlatch the door. The handle lies flat when locked, which means it won’t snag anything passing by. These locks are keyed alike, so choose them if you need several locks that open with the same key.

Also known as quarter-turn locks, these locks have a cam that rotates 90° as you swing the handle. They come with multiple cams, so you can change their fixed latching distance. An O-ring stops dust and water from getting into your sealed enclosure through the lock. This helps you maintain the enclosure’s IP65 rating. For extra protection, they also have a shutter that guards the cylinder from water and dust.

For technical drawings and 3-D models, click on a part number.

Remotely open your enclosure door with a card reader, manual release button, or other access control device. These locks have a switch that opens the lock when it receives power from your access system. They can also trigger a light, alarm, or other device to let you know when the lock is open or closed. Closing the door resets the switch. In case of emergency, these locks manually open with a key. Choose them if you need several locks that open with the same key.

Often installed on server cabinets and electrical panels, these locks have a handle that swings smoothly when you lift it to latch and unlatch the door. The handle lies flat when locked, which means it won’t snag anything that passes by.

These locks have a cam that rotates 90° as you swing the handle, so they’re also known as quarter-turn locks. To adjust their fixed latching distance, they come with multiple cams. They also include a stainless steel shutter that blocks rain, snow, and dirt from entering the lock cylinder, which can cause internal damage.

For technical drawings and 3-D models, click on a part number.

It’s harder to snag straps and other items on these wing-handle locks than on T- or L-handle locks. Also known as quarter-turn locks, all have an arm that rotates 90° to secure your enclosure. Choose them if you need several locks that open with the same key.

These locks include multiple cams, so you can change their fixed latching distance. Since you won’t have to adjust the cams into position, these locks are faster to install than those with an adjustable latching distance. All keep your sealed enclosure's contents safe from dust and water damage—they help maintain an enclosure's IP rating for low-pressure washdowns.

Use stainless steel locks in areas that are constantly exposed to moisture since they resist corrosion better than zinc locks.

For technical drawings and 3-D models, click on a part number.

Wire these locks to a card reader, manual release button, or other access system to remotely open an enclosure door. These locks have a switch that opens the lock when it receives power from your access system. You can also send a signal to a light, alarm, or other device to let you know when the lock is open or closed. Closing the door resets the switch. In case of an emergency, manually open these locks with a key. Choose them if you need several locks that open with the same key.

These locks secure your enclosure just like a traditional cam lock—an arm rotates 90° to pin your enclosure shut. This type of lock is commonly called a quarter-turn lock. They include multiple cams, so you can change their latching distance. A wing handle makes it harder to snag straps and other items on these locks than T- and L-handle locks.

The locks help keep your sealed enclosure's contents safe from dust and water damage—they help maintain your enclosure's IP65 rating for low-pressure washdowns. A stainless steel shutter blocks rain, snow, and dirt from entering the lock cylinder, which can cause internal damage.

For technical drawings and 3-D models, click on a part number.

Keep the contents of your sealed enclosure safe from water damage with these locks that help maintain the enclosure's IP or NEMA rating for low-pressure washdowns. Also known as quarter-turn locks, they have an arm that rotates 90° to secure your enclosures. All of the locks can be locked with a key as well as a padlock for added security. Choose them if you need several locks that open with the same key.

All of the cams in these locks have a fixed latching distance. Since you won’t have to adjust the cams into position, these locks are faster to install than those with an adjustable latching distance. Locks with a roller cam rotate more smoothly than those with straight and offset cams, making them easier to open and close. The cam won't scrape paint or metal chips off the frame that can damage sensitive electronics inside the enclosure. The roller cam also compresses a bit to help eliminate rattling noises from vibration.

For technical drawings and 3-D models, click on a part number.

Create a keyed locking system that fastens doors at multiple points. The swing-handle lock rotates smoothly when you lift the handle to latch and unlatch the door. The handle lies flat when locked, which means it won’t snag anything passing by. This lock is often installed on server cabinets and electrical panels. It comes with multiple cams, so you can change its fixed latching distance.

You first need a swing-handle lock, which acts as the base for these locks. Add a latch point by connecting an inline or 90° cam latch using a cam latch adapter (sold separately). For each latch point, you’ll need a cam latch, a rod, and two rod adapters. Weld cam latches to the inside of your enclosure door.

Choose keyed alike locks when you need several locks that open with the same key.

For technical drawings and 3-D models, click on a part number.