Connect these borescopes to your smart device to take high-resolution photos and videos of hard-to reach areas. The camera is mounted on a cable and surrounded by bright LEDs, so you can inspect the dark interiors of machines and ducts. Download an app onto your device to control the lights and camera, as well as to record, store, and share images and video. Your smartphone or tablet functions as the screen to view images and videos.

Borescopes with a rigid probe are best for straight runs. They have a tip that bends up to 180° in a single direction.

Borescopes with a flexible probe bend to navigate around corners and obstacles better than a rigid probe. They have more precise positioning of the camera to see into nooks and crevices.

View hard-to-reach areas live on the display. The camera is fitted with an LED, so you can inspect the interiors of machines and ducts. These borescopes can record video and allow you to view recordings on a PC monitor.

Style A borescopes let you view from up to a 10 feet away. They work well when you can clearly see the inspection area, but don’t need to control the tip. Add an optional 0.31" dia. cable that’s longer than the included cable and has a maximum viewing distance of 10 ft. from end of cable.

Style B borescopes have a smaller diameter and a longer cable than other borescopes to inspect deep inside intricate systems. They have a shorter viewing distance in total darkness, but you can move the camera closer to your inspection area for a better view. Adjust the brightness of the light on the borescope to reduce glare or reflections from shiny surfaces.

Style C borescopes include a hand controller, so you can bend the tip of the scope without removing it from the inspection area. Turn the knob to bend the tip up to 180° in two directions.

Style D borescopes give you 360° control over the tip. Their hand controller has a joystick that you can use to bend the tip up to 180° in all directions without removing it from the inspection area. Use the included magnetic stand to hold the borescope when it’s not in use.

Inspect from multiple angles—these borescopes have two cameras, so you can quickly toggle between the front and side view instead of backing up and turning the probe. Take photos and record videos while viewing a live feed on your smartphone or tablet. They're often used to inspect equipment, tanks, drains, and HVAC systems for repairs. Bend the flexible probe to pivot into tight spaces. Both cameras have an LED light to illuminate dark spaces. To adjust the brightness of the light or change the camera’s view, use the controls on the handle.

Rated IP67, these borescopes won’t get damaged from dust, even in areas with continuous airflow. They can also withstand temporary submersion in up to one meter of water.

Download an app onto your device to record and store images and video. You can connect your smartphone, tablet, or PC to the borescope using a USB cable.

Borescopes with 360° tip control bend up to 180° in any direction, giving you both flexibility and control. Operate the joystick to pivot the tip of the borescope.

View hard-to-reach areas live on the display or connect to a TV monitor with the included video cable. The camera is fitted with an LED, so you can inspect the dark interiors of machines and ducts. Maximum viewing distance from end of cable is 10 ft. Borescope is rated IP67 for protection from submersion.

Optional 0.31" dia. cable is longer than the included cable and has a maximum viewing distance of 10 ft. from end of cable.

View live footage from two inspection angles directly on these borescopes. Great for collaboration, the LCD monitor is big enough for multiple people to see. These borescopes also store images and video to an included SD card, so you can transfer them to other devices for future reference or compliance needs. Because they have two cameras, you can quickly toggle between the front and side view instead of backing up and turning the probe. Bend the flexible probe to pivot into tight spaces. These borescopes are often used to inspect equipment, tanks, drains, and HVAC systems for repairs. Both cameras have an LED light to illuminate dark areas. To adjust the brightness of the light or change the camera’s view, use the controls on the handle.

Rated IP67, these borescopes won’t get damaged from dust, even in areas with continuous airflow. They can also withstand temporary submersion in up to one meter of water.

Borescopes with two-way tip control maneuver through winding passages since you can bend the tip in either direction using a knob. They combine the pliability of flexible probes with the control of rigid probes.

Train and adjust these cameras right from the touchscreen monitor—no computer needed. They recognize defects and alert your system to remove or redirect faulty items on your line. With each image, these cameras also record what problem they were inspecting for with a pass or fail grade, which you can view on the monitor. Program them to check for drilled holes or blemishes, such as scratches. They’re also able to verify if a part or feature has the right shape, orientation, text, or logo. Since these cameras can’t focus on every detail of your part at once, it’s best to inspect for one problem at a time.

Since they come with a lens and light built in, they’re compact and easy to set up. Each image snapped is in grayscale, avoiding color distortions. Both the housing and the lens on these cameras is tightly sealed to keep out dust and moisture in tough manufacturing environments.

The ring light provides illumination from all directions. It gives off crisp cool tones that are ideal for inspection work. However, its white light will reflect on shiny surfaces, which affects accuracy.

Configure the output signal as either PNP or NPN to match the input of your line’s programmable logic controller (PLC) or other control device.

Field of view adjustment lens kits (sold separately) include five different lenses to change the view width and focus of your camera. The smaller the lens size, the wider the field of view.

Automate quality checks on your line—these cameras can detect if a part has missing pieces, misprinted labels, or other defects, then alert your system to pull it off the line. They come with a lens and a light built in, so they’re compact and simple enough to set up on your own. Use a computer and the included software to train them on what objects to focus on and what problems to look for with just a few images. You can teach them to count objects as they go by and even measure the distance between edges. They’re also able to check printed text and characters against a template and make sure barcodes are scannable. Or, to help with tracking and inventory, use these cameras to scan serial numbers and barcodes. They work with both standard 1D barcodes and 2D barcodes, such as QR codes.

These cameras capture high-quality images in grayscale that aren't distorted by color variation. The camera lens, also known as a liquid lens, automatically focuses on objects as they pass by on lines moving as quickly as a brisk walk. Without moving parts that could wear down over time, it lasts longer than a traditional geared autofocus lens. However, it can’t focus on every aspect of an object at once, so it’s best to inspect for one problem at a time. With each image, these cameras also record what problem they were inspecting for along with a pass or fail grade.

Mount them directly to a machine on your line—no mounting brackets needed. Built for tough manufacturing environments, these cameras have a rugged case that protects them from dust and water. You’ll need a cord (sold separately) to connect them to your network. Configure the output signal as either PNP or NPN to match the input of your programmable logic controller (PLC) or other control device.

Cameras with a wide lens are best for inspecting larger details, like how many eggs are in a carton or if a jug has a spout or not. Cameras with a medium lens catch whether a bottle cap has a seal and other details that are too small for cameras with a wide lens. Cameras with a narrow lens focus on small, specific areas, making them a good choice for checking the solder joint on a printed circuit board.

Cameras with light are a great option when inspecting reflective objects, such as metallic surfaces, since they don’t cause excessive glare. Cameras with ring light provide illumination from all directions.

Cameras with white light give off clean, crisp, cool tones that are ideal for inspection work. However, the white light will reflect on shiny surfaces. Cameras with red light won’t create a reflection or glare because the red color is absorbed by materials, which makes them ideal for inspecting shiny glass, plastic, or metal objects. However, cameras with red light won't create enough contrast to inspect red-colored objects.

An all-in-one solution for equipment monitoring. These cameras include a lens, sensor, and all the accessories you need to use them out of the box. Use them to keep an eye on harsh industrial processes from a safe distance by placing these cameras inside your machine. They've been tested to handle shock and vibrations as intense as those from your CNC milling machine. Use them to spot problems in your process or monitor for needed maintenance. With a frame rate comparable to a high-definition sports broadcast, they capture crisp, clear video of quick-moving processes. Connect them directly to a monitor with the HDMI cable to watch live footage—no PC required. An included remote lets you control the camera’s integrated software to overlay crosshairs and darken shadows, bringing the image into focus. Install these cameras inside a clear enclosure to protect against dust, debris, and fluids.

Cameras with lighting control come with additional software to fine-tune your camera’s settings, such as the white balance and exposure time. Use a PC to adjust the camera’s exposure time, the balance between brightness and clarity, and the frame rate.

Live stream your inspection in tight spots. These cameras reach into cramped areas to give you eyes into spaces that would otherwise be difficult to access and see. Use the downloadable app and built-in Wi-Fi connection to quickly sync your smartphone or tablet to these cameras and start streaming. You can also save photos and videos using the app to collaborate with others, analyze what you find, and diagnose issues.

A bright, LED light illuminates the field, so you can see in dim and dark areas. Turn the brightness of the light down to reduce glare on reflective surfaces. A textured grip on the handle gives you a secure hold, even if your hands are wet or oily.

Handheld cameras work well with heavy equipment that can’t be moved. Move and manipulate the position of the camera to see in and around objects.

Handheld/benchtop cameras are best when you want to keep your hands free. Stick the base onto magnetic surfaces for a secure hold or mount it more permanently with screws. The arm has ball joints that rotate to maneuver the camera 360°, while still holding it in position better than a gooseneck arm.

Flexible shaft attachments (sold separately) bend in any direction to reach into tighter spaces than telescoping arms.

Retrofit your traditional microscope to view a live feed of extra-fine details. These cameras replace one of the eyepieces on your microscope. Connect them to a computer so multiple people can see crisp, clear images of what’s under your microscope. Colors appear true to life thanks to a high-resolution sensor. Use the included software to take photos and videos. The software also includes tools for measuring the item you’re viewing.

View, grab, and position objects in hard-to-reach spots. These retrievers have a camera and light at the tip of the flexible shaft and an LCD that displays live video. In addition to picking up objects, they can be used in applications such as installing wiring behind walls and extracting clogs and debris from pipes.

Highlight small, specific areas with intensely bright light to help your machine vision camera home in on the details of your product. You can also position these lights to cast shadows to help your vision sensor detect the presence or absence of a feature on an object. Smaller than a hockey puck, these lights fit in tight spaces, so you can position them exactly where you need them. Each light requires an M12 cable (sold separately) to power it.

White lights are clean and crisp, giving off cool tones that are ideal for inspection work. They’re a versatile choice to help your camera see objects made of any color. However, white light creates reflections on shiny surfaces.

Red lights won’t create a reflection or glare because the color is absorbed by materials, which makes them ideal for inspecting shiny objects made from glass, plastic, or metal. By creating a contrasting color, they’ll help you easily spot if a product is contaminated or discolored, or if an unexpected object has found its way into a batch. However, red lights won't create enough contrast to inspect red-colored objects.

Add a mount to secure your light. Rotating mounts swivel to position the light where you need it. Mounts with 360° rotation also tilt up and down.

For technical drawings and 3-D models, click on a part number.

Detect edges, take measurements, and spot holes with your machine vision camera by passing objects over these backlights. They cast even, low-intensity light that sits opposite from your inspection camera to produce a silhouette for your camera to focus on. Each backlight requires an M12 cable (sold separately) to power it.

White lights produce clean, crisp illumination in blue and white tones, which is ideal for inspection work. They’re a versatile choice to help your camera see objects made of any color. However, they will reflect on shiny surfaces.

Red lights won’t create a reflection or glare because the color is absorbed by materials, which makes them ideal for inspecting shiny glass, plastic, or metal objects. By creating a contrasting color, they’ll help you easily inspect the edges and contours of an object. However, red lights won't create enough contrast to inspect red-colored objects.

Backlights with an IP67-rated housing are sealed to keep out dust and moisture, so you can use them on the floor below your conveyor or even submerge them in water.

Add a mount to secure your backlight to a load-bearing surface. They secure with a bracket to keep your light still for consistent and accurate imaging with your inspection camera.

For technical drawings and 3-D models, click on a part number.

Ranging in size from a domino to a small TV remote control, these lights shine bright, even light from tight spots on your production line. Use them to help your machine vision camera capture a detailed image for inspection. Mount them using the included fasteners and T-slot on the back. You can also arrange them in a square formation to minimize shadows. Each light requires an M12 cable (sold separately) to power it.

White lights are clean and crisp, giving off cool tones that are ideal for inspection work. They’re a versatile choice to help your camera see objects made of any color. However, they will reflect on shiny surfaces.

Red lights won’t create a reflection or glare because the color is absorbed by materials, which makes them ideal for inspecting shiny glass, plastic, or metal objects. By creating a contrasting color, they’ll help you easily spot if a product is contaminated or discolored, or if an unexpected object has found its way into a batch. However, red lights won't create enough contrast to inspect red-colored objects.

Infrared lights help you see through material, such as objects wrapped in thin paper, cloth, or plastic. Use them to help you determine the fill level of packages. This light isn’t visible to the human eye, so it won’t create a glare on objects and won’t strain your eyes.

Mounts tilt 180°, so you can adjust the position of the lights.

For technical drawings and 3-D models, click on a part number.

The most versatile of our machine vision lights, these bar lights can be used alone, installed side-by-side, or assembled into a ring light. When used alone, they illuminate a single strip of light; when multiple are installed next to each other, they flood your inspection area with light. When multiple are configured into a ring around your camera, they give you bright, even light aligned with the camera's field of view. Though these lights look like workspace lights, they shine a focused strip of light for inspection instead of giving off ambient light. Position them directly over the object your camera is inspecting or angle them for a better look at surface defects. An M12 cable (sold separately) is required to power these lights.

Each light includes a T-slot channel for mounting—keeping your set up modular and easy to adjust. Mount them to T-slotted framing with the included fasteners. Or, add a mount (sold separately) to secure the light to a stand or a nearby surface. These mounts tilt 180° and rotate 360°, so you can change the position of the light without changing the location of the mount.

White light beams are clean and crisp, giving off cool tones and uniform lighting ideal for inspection work. They’re a versatile choice to help your camera see objects made of any color. However, white light creates reflections on shiny surfaces.

Red lights won’t create a reflection or glare because the color is absorbed by materials, which makes them ideal for inspecting shiny glass, plastic, or metal objects. By creating a contrasting color, they’ll help you easily spot if a product is contaminated or discolored, or if an unexpected object has found its way into a batch. However, red lights won't create enough contrast to inspect red-colored objects.

Infrared lights help you see through material, such as objects wrapped in thin paper, cloth, or plastic. Use them to help you determine the fill level of packages. This light isn’t visible to the human eye, so it won’t create a glare on objects and won’t strain your eyes.

For technical drawings and 3-D models, click on a part number.

Flood bright, even light on parts so your machine vision camera can capture a detailed image for inspection. Use these lights to aid a range of inspections, from examining the surface of your part to making sure your labels are aligned. You can also set them up to cast shadows that make small components, such as a flange, easier for your vision sensor to detect than if using an overhead light alone. Each light requires an M12 cable (sold separately) to power it.

White lights are clean and crisp, giving off cool tones that are ideal for inspection work. They’re a versatile choice to help your camera see objects made of any color. However, they will reflect on shiny surfaces.

Red lights won’t create a reflection or glare because the color is absorbed by materials, which makes them ideal for inspecting shiny glass, plastic, or metal objects. By creating a contrasting color, they’ll help you easily spot if a product is contaminated or discolored, or if an unexpected object has found its way into a batch. However, red lights won't create enough contrast to inspect red-colored objects.

Infrared lights help you see through material, such as objects wrapped in thin paper, cloth, or plastic. Use them to help you determine the fill level of packages. The light isn’t visible to the human eye, so it won’t create a glare or cause eye strain.

For technical drawings and 3-D models, click on a part number.