Press-Fit Captive-Panel Retractable Spring Plungers
Use an arbor press or similar pressure tool to install these spring plungers into a panel. They have a spring-loaded pin that retracts to release sliding parts. Pull the knob to withdraw the pin from inner panel. Use them as a locator or hinge pin on removable doors. The body is zinc-plated steel to resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
For Hole Dia. | Body | Nose | |||||||
|---|---|---|---|---|---|---|---|---|---|
| For Outer Panel Thick. | Outer Panel | Inner Panel | Dia. | Lg. | Lg. | Dia. | Handle Material | Each | |
Zinc-Plated Steel Body and Steel Nose | |||||||||
| 0.06" to 0.15" | 0.328" | 0.252" | 0.45" | 0.48" | 0.32" | 0.249" | Nickel-Plated Steel | 000000000 | 00000 |
Twist-to-Lock Press-Fit Captive-Panel Retractable Spring Plungers
Lock the nose in the retracted position by pulling the knob and rotating it 90°. Use an arbor press or similar pressure tool to install these spring plungers into a panel. They have a spring-loaded pin that retracts to release sliding parts. Use them as a locator or hinge pin on removable doors. The body is zinc-plated steel to resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
For Hole Dia. | Body | Nose | |||||||
|---|---|---|---|---|---|---|---|---|---|
| For Outer Panel Thick. | Outer Panel | Inner Panel | Dia. | Lg. | Dia. | Lg. | Handle Material | Each | |
Zinc-Plated Steel Body and Steel Nose | |||||||||
| 0.06" to 0.15" | 0.328" | 0.252" | 0.45" | 0.48" | 0.249" | 0.32" | Nickel-Plated Steel | 000000000 | 00000 |
Thread-In Captive-Panel Retractable Spring Plungers
Insert the nose into a panel; then thread on the nut and tighten using an installation wrench (sold separately). These spring plungers have a spring-loaded pin that retracts to release sliding parts. Pull the knob to retract the nose. Use them as a locator or hinge pin on removable doors. The body is zinc-plated steel to resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Spring Plungers | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
For Hole Dia. | Body | Nose | Installation Wrenches | ||||||||
| For Outer Panel Thick. | Outer Panel | Inner Panel | Dia. | Lg. | Lg. | Dia. | Handle Material | Each | Each | ||
Zinc-Plated Steel Body and Steel Nose | |||||||||||
| 0.025" to 0.06" | 0.281" | 0.188" | 0.53" | 0.53" | 0.25" | 0.183" | 6262 Aluminum | 000000000 | 00000 | 000000000 | 000000 |
| 0.031" to 0.125" | 0.359" | 0.25" | 0.69" | 0.72" | 0.31" | 0.245" | 6262 Aluminum | 000000000 | 00000 | 000000000 | 00000 |
Twist-to-Lock Thread-In Captive-Panel Retractable Spring Plungers
Lock the nose in the retracted position by pulling the knob and rotating it 90°. Insert the nose into a panel; then thread on the nut and tighten using an installation wrench (sold separately). These spring plungers have a spring-loaded pin that retracts to release sliding parts. Use them as a locator or hinge pin on removable doors. The body is zinc-plated steel to resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
Spring Plungers | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
For Hole Dia. | Body | Nose | Installation Wrenches | ||||||||
| For Outer Panel Thick. | Outer Panel | Inner Panel | Dia. | Lg. | Lg. | Dia. | Handle Material | Each | Each | ||
Zinc-Plated Steel Body and Steel Nose | |||||||||||
| 0.025" to 0.06" | 0.281" | 0.188" | 0.53" | 0.53" | 0.25" | 0.183" | 6262 Aluminum | 000000000 | 00000 | 000000000 | 000000 |
| 0.031" to 0.125" | 0.359" | 0.25" | 0.69" | 0.72" | 0.31" | 0.245" | 6262 Aluminum | 000000000 | 0000 | 000000000 | 00000 |