We will reply to your message within an hour.
More
An excellent alternative to oil-filled bronze, graphite-filled bronze provides dry lubrication in temperatures as high as 700° F.
Filled with carbon and graphite, this naturally slippery PTFE stands up to wear better than standard PTFE.
Each pack includes one 2" circle of GPO3 fiberglass and Garolite XX, XXX, CE, LE, G-3, G-7, G-9, G-10, and G-11.
A good all-around choice, Garolite G-10/FR4 is strong, machinable, and electrically insulating. It meets UL 94 V-0 for flame retardance.
These rectangular tubes are flame retardant, machinable, and electrically insulating.
A good all-around choice, Garolite G-10/FR4 is strong, machinable, and electrically insulating. It meets UL 94V0 for flame retardance.
Use Garolite G-10 in place of Garolite G-10/FR4 for applications that are sensitive to halogen, such as in nuclear plants. It's strong, machinable, and electrically insulating.
Garolite CE is often fabricated into parts where high strength is not required.
These Garolite CE sheets and bars are often fabricated into parts where high strength is not required.
Graphite is added to this Garolite CE to provide a slippery surface that reduces friction and makes this material conductive.
Stronger than Garolite CE with better electrical-insulating properties, Garolite XX is often fabricated into low-cost electrical components.
Using nothing more than standard high-speed steel tooling, Garolite LE can be machined into intricate parts.
Easily turn these rectangular tubes into parts for transformers and switchgears using high-speed tooling.
Offering higher strength and better heat resistance than Garolite G-10/FR4, Garolite G-11 is suitable for continuous use in elevated temperatures.
Offering higher strength and better heat resistance than Garolite G-10/FR4, these Garolite G-11/FR 5 sheets are suitable for continuous use in elevated temperatures. With a black coating that reduces static electricity, these sheets are good for use in solder pallets, automated test equipment, electronic assembly workstations, and other applications where static buildup could damage your equipment.
Often used for terminal boards, electrical housings, end plates, and structural components in high temperatures, these sheets are a flame-retardant version of Garolite G-11. All are stronger and resist heat better than Garolite G-10/FR4.
A flame-retardant version of Garolite G-11, these tubes are commonly used to make bushings, standoffs, and spacers for areas with high temperatures. All are stronger and resist heat better than Garolite G-10/FR4.
Garolite G-7 withstands temperatures up to 425° F—higher than any other grade of Garolite. While not as strong as Garolite G-9 sheets, these sheets and bars offer better arc resistance in dry environments and a higher level of electrical insulation.
Machine these angles into arc barriers, switch mounts, and components for circuit breakers and electrical equipment. They resist carrying electric currents in dry or humid areas, even when exposed to sudden electric discharge.
Frequently called electrical-grade Garolite, this Garolite G-9 is strong, electrically insulating, and arc resistant in dry environments.
Choose these Garolite G-7 rods for their high heat tolerance—they withstand temperatures up to 425° F. While not as strong as Garolite G-9, they offer better arc resistance in dry environments.
More electrically insulating than Garolite XX, these tubes are often machined into insulating washers, bushings, transformer spacers, and parts of terminal boards.
Used in turbine bearings, downpipe gaskets, and other machinery, these Garolite tubes withstand heavy impacts and temperatures as high as 500° F.
Rated for temperatures down to -450° F, this Garolite G-10 CR performs better in cryogenic applications than other glass epoxies.
Rated for temperatures down to -415° F, this Garolite G-10 CR performs better in cryogenic applications than other glass epoxies.
Resisting heavy impacts and temperatures up to 500° F, these Garolite sheets are used in machinery such as turbine bearings and downpipe gaskets.
Often used in place of aluminum for structural frames, machinery components, and robotics, these tubes are lighter in weight and almost as rigid.
Fit these lightweight tubes inside each other to create adjustable tubes for structural framing, machinery components, and robotics.
Known for its use in the aerospace industry, where a balance of weight and strength is critical, carbon fiber is now often machined into panels for structural framing, machinery components, and robotics.
Lighter than aluminum while remaining rigid, these angles are often used as brackets in structural framing, machinery, and robotics.
Reinforce structures with these rods—they weigh less than aluminum while remaining strong and almost as rigid.
Mount these lightweight tubes to flat surfaces in place of aluminum to create structural frames, machinery components, and robotics.
Mount these lightweight half rounds on flat surfaces to reinforce frames and structures. Carbon fiber is often used in place of aluminum because it weighs less but is almost as rigid.
Often used to make railings, edge covers, and other structural framing parts, these carbon fiber U-channels add stiffness and strength to applications without adding a lot of weight.
A layer of foam is sandwiched between two pieces of carbon fiber to make a featherweight material that's even lighter than standard carbon fiber.
Layers of fibers alternating in four directions makes this carbon fiber stiff at the corners and edges, so it stands up to twisting forces.
Often used for structural framing, machinery components, and robotics, these carbon fiber tubes are as stiff as steel yet a fraction of the weight.
Almost as stiff as steel and a fraction of the weight, these carbon fiber sheets are often used for structural framing, machinery components, and robotics.
Often used to build frames and structures, these lightweight sheets combine the strength and stiffness of carbon fiber with the impact resistance of Kevlar.
Use these resin-free fabrics to reinforce or repair existing composites as well as create new composites. Mold custom-shaped composite parts by layering your choice of fabric with an epoxy.
Originally designed for the automotive and aerospace industries, these PAEK and carbon fiber sheets are a substitute for metal because they’re as light as aluminum and as strong as a nickel alloy.
Unlike metal rods, these metric threaded rods will not warp at extreme temperatures, making them ideal for heat treating and furnace fixtures.
Unlike metal rods, these threaded rods will not warp at extreme temperatures, making them ideal for heat treating and furnace fixtures.
Already set on a silicon wafer, these highly conductive graphene sheets are ready for use in semiconductors, advanced sensors, and electrodes.
This highly conductive graphene material is often used in electronic devices, such as cell phones, laptop computers, digital cameras, and LEDs.
Grown by chemical vapor deposition (CVD) on copper foil, this highly conductive graphene material can be transferred on to glass, silicone, and plastic film for use in proton exchange membranes, flexible electronics, and advanced sensors and electrodes.
Use these strips for high-temperature seals and heat insulation.
Even when exposed for as long as 2 minutes to temperatures up to 2600° F, these sheets won't ignite or melt.
The most commonly used 3D printing material, these PLA filaments make detailed parts at a low melting point, so they won’t warp as they cool, rarely clog nozzles, and don’t require a heated printer bed.
Bumps, scrapes, and falls won’t damage these tough ABS filaments. Known for their durability, they absorb impact without cracking or breaking, and won’t degrade when heated. Use them to print tool handles, storage cases, and other parts that are handled or dropped frequently.
Create strong, durable parts that carry heavy loads and absorb blows and other impact without cracking or breaking. Made of polycarbonate, these filaments are stronger and resist heat better than other impact-resistant filaments, such as those made from ABS or ASA.
Print tough, long-lasting parts that won’t scratch or wear out from constant motion and friction, such as gears and washers.
Parts printed with these polyester filaments absorb less moisture than other types of plastic, making them ideal for use in wet or humid environments.
Stronger than plastic and aluminum, this is the lightest weight framing we offer. It has good resistance to chemicals and salt water.