Made from 18-8 stainless steel, these bolts have good chemical resistance and may be mildly magnetic. They're a good choice for ACQ-treated (arsenic-free) lumber. A square neck keeps them from turning when tightening a nut. A smooth, rounded head provides a finished look. Length is measured from under the head. Dimensions meet ASME B18.5 or DIN 603 specifications. Some also meet ISO 8678. DIN 603 is functionally equivalent to ISO 8678 with slight differences in head diameter, head height, and length tolerances.

Match the thread spacing of mating components.

About half the strength of medium-strength bolts, these Grade 2 bolts are for light duty fastening. A square neck keeps them from turning when tightening a nut. A smooth, rounded head provides a finished look. Material meets ASTM A307 or SAE J429 specifications for quality. Dimensions meet ASME B18.5 specifications. Length is measured from under the head.

More corrosion resistant than 18-8 stainless steel bolts, these 316 stainless steel bolts have excellent resistance to chemicals and salt water and are a good choice for ACQ-treated (arsenic-free) lumber. They may be mildly magnetic. A square neck keeps them from turning when tightening a nut. A smooth, rounded head provides a finished look. Dimensions meet ASME B18.5 or DIN 603 specifications. Length is measured from under the head.

Made from Grade 8 steel, these bolts are at least 25% stronger than medium-strength steel bolts and can be used in high-stress applications, such as valves, pumps, motors, and automotive suspension systems. A square neck keeps these bolts from turning when tightening a nut. A smooth, rounded head provides a finished look. A zinc yellow-chromate plating provides corrosion resistance in wet environments. Grade 8 steel bolts are marked with six radial lines. Material meets SAE J429 specifications for quality. Dimensions meet ASME B18.5 specifications. Length is measured from under the head.

Made from Grade 5 steel, these bolts are suitable for fastening most machinery and equipment and are zinc plated to resist corrosion in wet environments. A knurled neck grips the inside of the hole to keep them from turning when tightening a nut. A smooth, rounded head provides a finished look. Grade 5 steel bolts are marked with three radial lines. Material meets SAE J429 specifications for quality. Length is measured from under the head.

About half the strength of medium-strength bolts, these bolts are for light duty fastening. The zinc plating provides corrosion resistance in wet environments. A knurled neck grips the inside of the hole to keep them from turning when tightening a nut. A smooth, rounded head provides a finished look. Material meets ASTM A307 and SAE J429 specifications for quality. Length is measured from under the head.

Made from bronze, these bolts provide corrosion resistance to salt water, gases, and sewage, and are nonmagnetic and electrically conductive. A square neck keeps them from turning when tightening a nut. A smooth, rounded head provides a finished look. Dimensions meet ASME B18.5 specifications. Length is measured from under the head.