Their spring-loaded design withstands vibration, rattling, and shaking better than other push-to-close grab latches for a more secure hold.

Turn the screw on the latch to adjust the gripping force on the strike plate.

Also known as bullet catches, these latches have a spring-loaded ball that grabs and holds the strike plate to keep doors shut.

Close and open these grab latches with a push—there's no need for a handle.

These latches are spring-loaded to overcome resistance caused by gaskets and air pressure to close doors tightly.

Doors stay closed with the pressure of rollers against the strike plate.

To keep your environments free of contaminants, the magnet is encapsulated so it won't release particles when it meets the strike plate.

These latches withstand temperatures up to 480° or 570° F.

Keep doors on refrigerators and industrial enclosures closed.

For use on spray booths and drying ovens, these latches automatically open when the internal pressure of the enclosure reaches a set level.

Also known as paddle latches, these are often used on electrical panels, cabinets, and lockers. Quickly push them closed to secure doors.

Quickly push these latches closed to secure doors and pull the ring handle with your finger to open them.

A flat grip and recessed T-handle keep clothing and other objects from bumping or catching on these latches.

Mount these locks horizontally to the face of doors on refrigerators and industrial enclosures with the strike plate mounted on the frame.

An emergency release gives you a way to escape if the door closes with you or someone else inside the enclosure. Mount these locks horizontally to the face of doors on refrigerators and industrial enclosures with the strike plate mounted on the frame.

Pull the edge of the lock to open your door—the low-profile grip fits in tight spaces. These locks are a convenient alternative to cam and draw locks since they don’t require you to turn a cam or pull a latch.

Great where space is a concern, these locks have a spring-loaded ring handle that returns to its recessed position when you release it. Push them closed to lock your door automatically.

Attach these padlockable latches vertically to the side edge of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted behind it on the frame.

An emergency release handle offers a means of escape if a door closes with someone inside an enclosure.

Twist the knob on these locks to open doors and push them closed to secure. These locks are a convenient alternative to cam locks, which require you to rotate the cam to open and close doors.

Push doors closed and a return spring automatically snaps these locks together to secure them tightly in place. Pull them open with the included two-way key, which is also known as a double-bit key.

Quickly push to secure sliding doors on industrial cabinets and enclosure panels. These locks open with a square key.

To prevent accidental opening, these latches have a safety catch.

A safety catch prevents accidental opening.

Easily snap these latches into cutouts without tools or other hardware.

To prevent accidental opening, these latches have a safety catch.

Mount these latches on a corner to draw perpendicular surfaces together.

The latch arm is coated with vinyl so it won't scratch surfaces.

A safety catch prevents accidental opening.

To prevent accidental opening, these latches have a safety catch.

Adjust the latching distance for a tight fit over gasketing and to compensate for misalignment.

Use these L-handle latches to draw lightweight surfaces together.

With a spring-loaded handle, these hold tighter than other turn-to-open draw latches and compensate for slight misalignment.

To secure overlapping components, pull the slide over the stud until they snap together. These latches resist shock and vibration.

For use on gasketed doors, these latches use downward compression to pull surfaces together. They have a safety catch to prevent accidental opening.

Mount these latches on a corner to draw perpendicular surfaces together. They have a safety catch to prevent accidental opening.

Adjust the latching distance to compensate for gasketing and misalignment.

Each latch comes with a variety of strike plates for different mounting options.

Secure cases, toolboxes, and other containers—these locks reach around outside corners to draw two surfaces together.

Open several draw locks with the same key.