Nail-Pulling Pry Bars
The claw-shaped end grips and extracts nails, tacks, and brads. Also known as claw bars.
Style A are also known as bear claws.
Style B are often used for stripping and removing wooden concrete forms after concrete has set.
Style F have a handle arch that allows more swing during pulling and prying without the need to use a block for leverage.
Style G are also known as crow bars.
Bar | ||||||||
|---|---|---|---|---|---|---|---|---|
| Overall Lg. | Weight | Size | Shape | End Wd. | Number of Nail Slots | Material | Each | |
| 7 3/4" | 11 oz. | 3/8" | Flat | 5/8" × 5/8" | 2 | Painted Steel | 00000000 | 000000 |
| 10 1/2" | 14 oz. | 1/2" | Flat | 13/16" × 13/16" | 2 | Painted Steel | 00000000 | 00000 |
| 11 3/4" | 1 1/8 lbs. | 1/2" | Flat | 7/8" × 7/8" | 2 | Painted Steel | 00000000 | 00000 |
| 14 1/4" | 1 5/8 lbs. | 5/8" | Flat | 1" × 1" | 2 | Painted Steel | 00000000 | 00000 |
 |  Chisel End |
Claw End |
Bar | ||||||||
|---|---|---|---|---|---|---|---|---|
| Overall Lg. | Weight | Size | Shape | End Wd. | Number of Nail Slots | Material | Each | |
| 18" | 1 3/8 lbs. | 3/8" | I-Beam | 1 3/4" × 1 3/8" | 3 | Painted Steel | 0000000 | 000000 |
Bar | ||||||||
|---|---|---|---|---|---|---|---|---|
| Overall Lg. | Weight | Size | Shape | End Wd. | Number of Nail Slots | Material | Each | |
| 15 1/2" | 1 3/4 lbs. | 1 3/8" | Flat | 1 3/4" × 1 3/4" | 3 | Painted Steel | 0000000 | 000000 |
Bar | ||||||||
|---|---|---|---|---|---|---|---|---|
| Overall Lg. | Weight | Size | Shape | End Wd. | Number of Nail Slots | Material | Each | |
| 24" | 3 1/2 lbs. | 3/4" | Hex | 1 3/8" × 1" | 1 | Painted Steel | 0000000 | 000000 |
| 30" | 4 1/4 lbs. | 3/4" | Hex | 1 3/8" × 1" | 1 | Painted Steel | 0000000 | 00000 |
| 36" | 8 1/2 lbs. | 1" | Hex | 2 1/4" × 1 1/2" | 1 | Painted Steel | 000000 | 00000 |
| 42" | 9 lbs. | 7/8" | Hex | 1 5/8" × 1 1/8" | 1 | Painted Steel | 000000 | 00000 |
| 48" | 12 1/2 lbs. | 1" | Hex | 2 1/8" × 1 5/8" | 1 | Painted Steel | 0000000 | 00000 |
| 60" | 15 1/2 lbs. | 1" | Hex | 2 1/4" × 1 1/2" | 1 | Painted Steel | 000000 | 00000 |
Screwdriver-Style Nail-Pulling Pry Bars
The claw-shaped end grips and extracts nails, tacks, and brads while the plastic handle provides a comfortable grip.
Bar | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Overall Lg. | Shaft Lg. | Weight, oz. | Size | Shape | End Wd. | Number of Nail Slots | Material | Each | |
Offset Claw End | |||||||||
| 7 1/4" | 3 3/4" | 2 | 1/4" | Round | 7/16" | 1 | Nickel-Plated Steel | 0000000 | 00000 |
Miniature Pry Bars
Lift and pry small objects, such as electronic and circuit board-mounted components. These tools have a static-dissipative handle that drains static from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment. They are also known as chip lifters.
Bar | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Overall Lg. | Wt., oz. | Shaft Lg. | Size | Shape | End Wd. | Material | Handle Material | Surface Resistivity | Each | |
Offset Claw End | ||||||||||
| 5 3/4" | 1 | 2" | 1/8" | Flat | 1/8" | Chrome-Plated Steel | Plastic | 106-109 ohms-cm. | 0000000 | 000000 |
Nail-Pulling Nonsparking Pry Bars
x Straight
Hammer End
The claw-shaped end grips and extracts nails, tacks, and brads. Made of aluminum-bronze that is Factory Mutual approved, these tools inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Also known as claw bars.
Warning: Do not use these tools in direct contact with acetylene.
Bar | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Overall Lg. | Weight | Size | Shape | End Wd. | Number of Nail Slots | Material | Specifications Met | Each | |
Offset Claw End × Straight Hammer End | |||||||||
| 9" | 14 oz. | 3/4" | Flat | 1 3/8" × 2 3/4" | 1 | Aluminum-Bronze | FM Approved | 0000000 | 000000 |
U-Shaped Claw End × Offset Chisel End | |||||||||
| 18" | 1 7/8 lbs. | 5/8" | Hex | 1 1/8" × 5/8" | 1 | Aluminum-Bronze | FM Approved | 000000 | 000000 |
| 24" | 3 3/4 lbs. | 3/4" | Hex | 1 1/4" × 3/4" | 1 | Aluminum-Bronze | FM Approved | 000000 | 000000 |
| 30" | 6 lbs. | 7/8" | Hex | 1 9/16" × 7/8" | 1 | Aluminum-Bronze | FM Approved | 000000 | 000000 |
| 36" | 7 1/2 lbs. | 7/8" | Hex | 1 11/16" × 7/8" | 1 | Aluminum-Bronze | FM Approved | 000000 | 000000 |