Top-down protection for your clean rooms—a gasket on these lights seals out contaminants. They’re also covered in an antimicrobial paint and are fully enclosed. What makes them great for clean rooms also makes them great for washdowns and food preparation areas. They’re rated NSF/ANSI 2 for splash zones, so you can use them around splashing liquids from food. They’re sealed against humidity and low-pressure washdowns thanks to their IP65 rating. You can install these IC-rated lights in direct contact with insulation without risking a fire. Their lens disperses light evenly.

Lights with clamping arms will install into any finished ceiling opening, even if you don't have a drop ceiling. They have a prismatic lens that casts a beam that covers a wider area and limits glare better than lights with a smooth lens.

Neutral lights are often used in workspaces. Cool lights highlight white and blue tones for higher visibility than neutral lights.

Prevent contaminants from entering your ISO Class 3 clean room—these lights have an airtight seal. What makes them great for clean rooms also makes these lights ideal for food preparation and other spaces that require frequent washdowns. They’re rated NSF/ANSI 2 for direct contact with food. Rated IP65 and ETL listed for wet locations, they’re sealed against humidity and low-pressure washdowns. They have a cool light appearance that highlights white and blue tones to make your work more visible. A prismatic lens casts a wide beam and limits glare on your equipment.

To install, fasten with No. 14 tapping screws and seal with silicone (both not included).

Brightness is measured in lumens; the higher the lumens, the brighter the bulb. Color rendering index (CRI) is a measurement on a scale of 0-100 of how accurately the light from a bulb represents an object's true colors; the higher the number, the more natural the colors appear. Any CRI value over 80 will show colors true to life. Bulbs with a warm light appearance have yellow tones. Bulbs with a neutral light appearance are often used in workspaces. Bulbs with a cool or daylight appearance have white/blue tones and are good for inspecting. A bulb’s estimated yearly cost is based on 3 hours of usage per day at $0.11 per kWh.

Fluorescent bulbs are energy efficient, but they contain small amounts of mercury (for disposal information, visit www.epa.gov/cfl). Plastic-coated glass bulbs are shatter resistant; the coating retains glass shards if they break.

Bulbs that cannot be sold to the areas listed exceed local regulatory limits on mercury and/or do not meet local efficiency standards.

Brightness is measured in lumens; the higher the lumens, the brighter the bulb. Color rendering index (CRI) is a measurement on a scale of 0-100 of how accurately the light from a bulb represents an object's true colors; the higher the number, the more natural the colors appear. Any CRI value over 80 will show colors true to life. Bulbs with a warm light appearance have yellow tones. Bulbs with a neutral light appearance are often used in workspaces. Bulbs with a cool light appearance have white/blue tones and are good for inspecting. A bulb’s estimated yearly cost is based on 3 hours of usage per day at $0.11 per kWh.

Fluorescent bulbs are energy efficient, but they contain small amounts of mercury (for disposal information, visit www.epa.gov/cfl). Plastic-coated glass bulbs are shatter resistant; the coating retains glass shards if they break.

Bulbs that cannot be sold to the listed regions do not meet local energy efficiency and/or mercury regulations.

Brightness is measured in lumens; the higher the lumens, the brighter the bulb. Color rendering index (CRI) is a measurement on a scale of 0-100 of how accurately the light from a bulb represents an object's true colors; the higher the number, the more natural the colors appear. Any CRI value over 80 will show colors true to life. Bulbs with a warm light appearance have yellow tones. Bulbs with a neutral light appearance are often used in workspaces. Bulbs with a cool or daylight appearance have white/blue tones and are good for inspecting. A bulb’s estimated yearly cost is based on 3 hours of usage per day at $0.11 per kWh.

Fluorescent bulbs are energy efficient, but they contain small amounts of mercury (for disposal information, visit www.epa.gov/cfl). Plastic-coated glass bulbs are shatter resistant; the coating retains glass shards if they break.

Bulbs that cannot be sold to the listed areas do not meet local efficiency and/or mercury regulations.

Illuminate large warehouses, factories, and arenas with the bright, white light of these metal halide bulbs. Brightness is measured in lumens; the higher the lumens, the brighter the bulb. Color rendering index (CRI) is a measurement on a scale of 0-100 of how accurately the light from a bulb represents an object's true colors; the higher the number, the more natural the colors appear. Any CRI value over 80 will show colors true to life. A bulb’s estimated yearly cost is based on 3 hours of usage per day at $0.11 per kWh.

Plastic-coated glass bulbs are shatter resistant; the coating retains glass shards if they break.

Bulbs that cannot be sold to the listed areas exceed local regulatory limits on mercury content.