Upgrade your existing bay lights to energy-efficient LEDs without replacing your mounting hood or conduit. These lights are NEMA 4X rated, so they’re sealed to withstand sprayed water and cleaning chemicals from washdowns. They’re also UL marine listed to resist corrosion from salt water. IP66 and IP67 rated, they’re dust tight. Even in extreme temperatures, from -40° F to 145° F, they keep shining.

Style A have mounting holes that align with Crouse-Hinds mounting hoods—no mounting adapter required. Styles B and C require an adapter (sold separately) to fit into Crouse-Hinds, Killark, and Mercmaster mounting hoods. Rated IK08 for impact resistance, they’re strong enough to take a hit without cracking.

Illuminate chemical plants, refineries, and other facilities where flammable and combustible gases may be present in the event of a leak or ventilation failure. These lights are rated for use in NEC Class 1, Division 2 hazardous locations. IP or NEMA rated, their seal also blocks out water and dust, so you can use them in damp, humid, and even washdown areas. Use the mounting holes to mount these lights to your ceiling.

For additional protection, choose a light rated for more NEC classes. NEC Class II-rated lights protect against flammable and combustible dust.

UL marine listed lights resist the corrosive effects of salt water. ABS (American Bureau of Shipping) Design Assessed lights meet requirements for use on docks and ships.

Lights that meet NSF/ANSI 2 standards are commonly used in food handling and processing areas with splashing liquid.

Built for hot, hazardous areas such as steel mills and refineries, these lights work in temperatures up to 212° F. Rated NEC Classes I and II, they’re safe to use where there are ignitable concentrations of flammable or combustible gases, vapors, liquids, and dust. Rated IP67 and NEMA 6, they’re sealed against humidity, washdowns, and even temporary submersion. They’ll also stay sealed in dusty conditions.

Mount these lights with the included bracket. It tilts to direct light where you need it.

These lights last at least a year when used at 212° F continuously. And at 131° F, they’ll last almost 7 years.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

The enclosure on these jelly jar lights contains explosions, sparks, and flashes. These lights are safe to use in NEC Class I, II, and III, Division 1 hazardous locations. Certified to a T4 (275° F) or T5 (212° F) temperature classification, their surface stays cool enough to avoid igniting flammable material. They are also ETL and C-ETL listed to meet safety standards in the United States, Canada, and Mexico. All lights are hardwired and mount with fasteners (not included).

Lights with a built-in LED eliminate the need to swap out bulbs. They’re also more energy efficient and produce less heat than lights with an incandescent bulb. They're rated IP67 for protection against temporary submersion.

Safely light up chemical processing plants, mining operations, and other large areas where combustible gases and dust are present. These lights have an explosion-proof housing that contains sparks and flames, so they won’t react to nearby hazards. With a T4 classification, their surface temperature stays below 275° F to avoid igniting flammable substances. Because they’re totally sealed, they also work well in wet, dusty, and corrosive environments—they’re IP and NEMA rated, and UL marine listed.

Mount them to your ceiling or other surface with the included adjustable bracket. The bracket pivots, so you can aim the light where needed. To suspend them from your ceiling, combine a pendant mount and junction box (sold separately).

Mount these lights in large, open areas where flammable and combustible gases may be present, such as during leaks or ventilation failures. These lights are rated for use in NEC Class 1, Division 2 hazardous locations. They meet NEC hazardous location temperature classifications, so their surface stays cool enough to avoid igniting hazardous gases. All are IP rated and UL marine listed, which confirms they also keep out dust and water and resist the corrosive effects of salt water. Mount them to your ceiling or wall with the included bracket.

For additional protection, choose a light rated for more NEC classes. NEC Class II-rated lights protect against flammable and combustible dust. NEC Class III-rated lights protect against flammable and combustible fibers.

Style 1 are IK08 rated—they'll withstand impact. They have a tempered glass lens that resists scratches better than a polycarbonate lens. All are ETL and C-ETL listed to meet U.S. and Canadian safety standards. To hang them from the ceiling, add suspension hardware or combine them with a pendant mount and junction box (all sold separately).

Upgrade your existing hazardous location bay lights to energy-efficient LEDs. Choose a light that matches the model already in place—they’ll fit into your existing hood and connect to the wires already in your conduit. Safe to use in areas with combustible concentrations of gases, vapors, dust, and fibers, these lights are rated NEC Class I, II, and III.

These lights even stand up in wet and outdoor locations. Rated IP66 and IP67, they withstand washdowns and submersion in water. They’re also dust tight. For resisting salt water and other corrosive liquids, they’re UL marine listed and NEMA 4X rated. They’ll keep shining in extreme temperatures, from -40° F to 145° F.

Style A have mounting holes that align perfectly with Crouse-Hinds mounting hoods—no mounting adapter required.

Style B and C require an adapter (sold separately) to fit into Crouse-Hinds, Killark, and Mercmaster mounting hoods. Style B are rated IK08 for impact resistance against accidental bumps.

Hang a string of lights overhead to brighten wet jobsites. IP rated, these lights are sealed to keep out dust and moisture from washdowns, splashes, and sprays, even outdoors. They have multiple heads, so you can light large areas. Daisy chain multiple strings together to cover an even larger area.

Style C are built the toughest to withstand extreme weather. You can use them in temperatures as low as -40° F and plunge them 3 ft. under water, and they’ll still work. These lights not only carry one of the toughest IP ratings but also the top NEMA rating for outdoors and use near oil and coolant. They cast light at a 200° angle, illuminating a broad area.

Pop these lights on magnetic surfaces to brighten wet spaces. Rated NEMA 6 and ETL listed, you can splash, spray, or dunk them in water, and they’ll keep working. Strong magnets on the back keep them from sliding down or shaking loose. You can also secure them with a chain (not included) from the eyebolt at the top.

Style A and D have a handle for carrying the lights to your worksite.

Lights with an outlet included can be connected together to avoid running separate extension cords. Link up to 10 lights on one circuit. For increased spacing between lights, you can add an extension cord between them.

Splashes and drips are no problem for these lights. They don’t need an outlet, so you can bring them wherever you’re working. With a swivel hook and a magnet, you can attach them where convenient and aim light on your task. IP rated, they’re sealed to keep water from working its way in and causing failure. Their light mimics natural daylight to give you a crisp, clear light that’s good for inspecting.

Style E have a magnet embedded in the hook. Since the hook folds, you can use it to tilt the light toward your task. Use the light on the end as a flashlight when all you need is a narrow beam. A battery life indicator lets you know when it’s time to charge these lights. They’re tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Aim light where you need it—even in explosion-prone spaces—by raising, lowering, and tilting these lights on their tripod. Rated NEC Classes I, II, III, and Zone 0, they’re safe to use near ignitable concentrations of flammable or combustible gas, dust, or fibers. Intrinsically safe, they’re designed not to create enough heat or sparks to trigger an explosion.

They’re durable enough to fall from 6 ft. and still work. The polycarbonate lens resists impact, and the sturdy steel body has rubber cushioning on the edges. Rated IP67, they’re completely dust tight and can be submerged in water and still work. They’re also tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Set these cordless lights up on the included tripod or mount them using the hook on the back or the magnet on the base. You can set these lights up quickly and move them elsewhere at a moment’s notice. The hook makes it easy to carry them around your jobsite and the carrying case fits both the light and the tripod.

Flood hazardous areas with light—these lights are intrinsically safe, meaning they can’t cause an explosion or fire. Rated NEC Class I, II, III, and Zone 0, they’re safe to use in areas with ignitable concentrations of flammable or combustible gases, dust, and fibers. They’re often used in refineries, mines, and paint booths. Pivot their head up and down to direct light where you need it most. These lights are rechargeable, compact, and include a carrying case for easy transport to jobsites without power.

They’re durable enough to fall from 6 ft. and still work. The edges of the metal body are cushioned with rubber, and the lens is impact-resistant polycarbonate. Rated IP67, they are sealed against dust and water. You can drop them in water, and they’ll keep working. These lights are tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Mount them using the extendable swivel hook on the back or the magnet in the base. The hook also functions as a carrying handle. Add a tripod if there’s nowhere to mount the light and you need to position it higher than on the ground.

Flood dark, remote jobsites with multiple tiers of light. These cordless lights stack on top of each other to focus a strong beam of light in one direction. The head pivots to aim light where you need it. You can also hang the hooked feet over doors, scaffolding, and other surfaces. With an alloy steel frame and an impact-resistant plastic lens, these lights are built for tough jobsites. Still, they’re lightweight enough to carry around. You can use them outdoors and in other damp locations—rated IP07, they can even handle temporary submersion. A digital display shows you how much charge is left at the brightness level you’re using.

Brighten remote areas, even if they’re damp or rainy. These floodlights are IP rated to keep out humidity and dripping, splashing, and falling liquids. Lightweight, you can move them elsewhere at a moment’s notice.

Style B are made with tough jobsites in mind. For impact resistance, they’re cushioned with rubber at the edges and have a tempered-glass lens. You can drop them from up to 6 feet without damage. Rated IP67, they’re dust-tight and will still work if temporarily submerged under water. Adjust them to any angle to aim light exactly where you need it. To mount, hang them up with the extendable hook or stick the magnetic base to a metal surface. If there’s no surface to mount them on, add a tripod (sold separately).

Style C are the best at showing slight color differences. Originally used by evidence technicians, they’re great for inspecting paint or similarly colored wires. Light up something nearby or far away by adjusting the diffuser lens from a flood beam to a spot beam. Rated IP07, these floodlights will still work even if they’re temporarily submerged. They also have the best battery life, offering up to a full day of lighting. For unlimited operation, use the included adapters to plug them into a standard outlet or a 12V power source, such as a truck. They also come with a remote that lets you control them from up to 20 feet away. To mount, hang them like a lantern with the loop on top or stick them to a metal surface with the magnetic base. If you don’t have a surface to work with, add a tripod (sold separately).

Floodlights tested against ANSI/PLATO FL 1 standards confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.