Don’t waste energy lighting unoccupied spaces—these lights turn on when they detect movement. They’re commonly used in hallways and small storage spaces.

Lights with rechargeable batteries stay on for 3 minutes after motion stops. Their mounting plate attaches to surfaces with the included fasteners or adhesive. The light connects to the mounting plate with magnets, so it’s easy to take off when it’s time to charge. You can also attach the light directly to any magnetic surface. The polycarbonate lens resists impacts. These lights cannot be sold to Canada due to energy efficiency requirements.

Lights with disposable batteries stay on for 20 seconds after motion stops. Rated IP04, they’re sealed to keep out splashing and dripping water. They’re also CE marked to meet European safety standards.

Hardwired lights are configurable. Set them to turn off after 30 or 180 seconds. Select a warm, neutral, or cool light appearance to fit your environment. For spaces that occasionally get natural light, you can set these lights to stay off when there’s sufficient ambient light. Turn off the sensor to use them as regular ceiling lights.

Neutral lights are often found in workspaces. Warm lights have a yellow tone similar to incandescent lights. Cool lights highlight white and blue tones. This is ideal for inspection areas, workshops, and other areas that require high visibility.

Create long rows of lights in indoor workspaces without having to hardwire one unit to another. Connectors affix these lights to each other—choose a butt connector for an uninterrupted row or a cable connector to space them apart (both sold separately). All mount directly to the ceiling or wall. They require a power cord (sold separately).

Style A lights have adjustable brightness and light appearance, so you can match your existing lighting. They come with v-hooks, so you can add your own chain to suspend them. Add suspension hardware or mounting brackets (both sold separately) for a polished look.

Lights with a motion/light sensor turn on when they detect movement and turn off after a set period to reduce energy costs. They automatically dim the light when there is adequate daylight. They can control up to 10 connected lights. Add a remote control to adjust other settings, such as how long lights stay on after detecting motion or how much daylight will cause them to dim. Lights with a backup battery meet UL 924, which means they'll keep shining for at least 90 minutes if the power goes out.

Light up spaces that have no electrical connection or are difficult to wire, such as sheds and closets. Pop these lights into the included magnetic mounting brackets or hang them by their hooks—they’re easy to remove when it’s time to charge. To save battery, they have a motion sensor, so they only light up when they detect movement. They emit a neutral white light through a clear lens, providing bright, focused lighting so you can quickly find what you need. The lens is made of polycarbonate for impact resistance. UL listed for use in damp locations, these lights can handle humidity and moisture.

These lights cannot be sold to Canada due to energy efficiency requirements.

With more surface area than round bay lights, these fixtures produce softer light with less glare. Use them to replace old fluorescent lights and illuminate large, open areas with high ceilings. Rated for use in damp locations, these lights withstand humidity and moisture.

Lights with a narrow beam direct light downward, so they’re good for confined spaces such as warehouse aisles.

Lights with a motion sensor turn on when people or vehicles are present.

Styles B-D have thermally protected drivers and larger heat sinks than other bay lights, so they’ll last longer at higher temperatures. Their LEDs have a consistent color temperature, which helps maintain a uniform appearance across multiple lights.

Style B lights are compatible with an emergency backup battery (sold separately), so they’ll stay lit for 90 minutes if the power goes out. The battery meets UL 924 standards.

Often used in stairwells and hallways, these lights save energy by only turning on when they sense movement. Once movement stops, they’ll dim or turn off completely—choose your preference with the controls in front. You can also adjust the light duration and sensor range. These lights are DLC (DesignLight Consortium) listed, so they’ve been tested to confirm their energy efficiency.

Choose between a neutral or cool light appearance on the LED driver to match existing lights. To minimize glare, the frosted lens disperses light evenly. It’s also made of polycarbonate to resist impact.

All are UL listed to resist humidity and moisture, so they’ll work in damp locations. Lights with a backup battery shine a 1,000 lumen light for 90 minutes if the power goes out.

IP or NEMA rated, these lights have a sealed lens to keep dust and moisture out for protection against washdowns. All meet ETL or UL standards for wet locations.

Mount these lights to the ceiling with the included brackets. For lights with mounting V-hooks, you can suspend them from the ceiling with chains (not included).

Styles A-B have a wraparound lens that allows light to shine from the sides as well as the bottom. Lights with a backup battery stay illuminated for at least 90 minutes during a power outage in compliance with UL 924.

IP65 lights withstand light rinses. NEMA 4X lights withstand corrosive liquids and spraying water—including washdowns.

Lights that meet NSF/ANSI 2 standards are commonly used in food handling and processing areas with splashing liquid.

Illuminate entryways and walkways at night—these lights shine when they detect motion. Powered by the sun, they can be installed where you don’t have access to electricity. They dim at night when no motion is detected to save battery. All meet IP65 and are sealed against dust and moisture, so they’ll stand up to wet weather.

For best performance, position the solar panel in full sunlight and avoid shaded areas.

These lights can also be set to turn on at dusk and run for 6 or 8 hrs. Style A operate continuously at 10% brightness. Styles B-E operate continuously at full brightness.

Styles D and E include a cord to install the solar panel where there is sunlight. Style D are ideal for cold climates because their insulated battery charges at temperatures as low as 0° F. The solar panel can also mount directly to the light when space is tight.

Startle intruders and draw attention to activity in remote areas without access to power—these solar-powered lights shine bright when motion is detected. They charge during the day, and the battery lasts all night with typical activity. If triggered continuously, these lights reduce brightness to last six hours on a full charge. Rated for use in wet locations, they hold up in rain and humidity.

Mount these lights about 8 ft. high on exterior walls. For maximum sunlight exposure, place the solar panel on a roof or wall.

Lights with two heads can also be set to turn on at dusk and run continuously for up to six hours, even if no motion is detected. They include a stake for installing the solar panel in the ground.

Mount these lights high on exterior walls to improve nighttime visibility and deter intruders. Each head adjusts to any angle, so you can aim the beam where you need it. These lights can be used in wet locations.

Select a light appearance to match your existing lighting. If you’re not sure what temperature you need, choose a light with a selectable light appearance. You can adjust the temperature with a switch.

Lights with both a light and motion sensor turn on only when they detect movement after dark.

Lights rated IP65 are sealed against dust and moisture, so they’ll stand up to sprinklers and heavy rain.

Hang these lights in garages and covered walkways to create a safe, well-lit path. They’re also known as canopy lights. All are either UL or ETL Listed for use in wet locations. Select a light appearance to match your existing lighting. If you’re not sure what temperature you need, choose a light with a selectable light appearance. You can adjust the temperature with a switch.

Fasten these lights to a ceiling or to an outlet box. Styles A-C can also be suspended like a pendant from conduit.

Lights with a light sensor automatically turn on in low light conditions. Lights with a motion sensor stay dim until movement is detected, saving energy.

Lights rated IP65 are sealed to keep out dust and driving rain.

Point these lights toward paths, doorways, and other dark areas. Since they run on batteries, you can skip the hassle of running wires. They only turn on when they sense motion, so the batteries last longer than they do in lights that are always on. These lights are rated IP06—they’re sealed for protection from wet weather.

See what’s happening outside your facility—day and night. These lights have a built-in video camera that records when they sense motion. When it’s dark, the LED heads activate at the same time to illuminate the area. The speaker has two-way audio, so you can talk to the person on camera. You can also blast a siren through the speaker to deter a potential intruder. Rated for use in wet locations, these lights hold up to rain and humidity.

Download the free app to your mobile device to control these lights via Wi-Fi. Use the app to adjust settings, set up notifications, schedule lights to turn on and off, and review footage. Because videos are stored on the included 128 GB microSD card, you don’t need to pay for a subscription to view them. The app alerts you when storage is low. If it runs out, new videos record over the oldest ones.